Network Working Group W. Zhao Request for Comments: 3832 H. Schulzrinne Category: Experimental Columbia University E. Guttman Sun Microsystems C. Bisdikian W. Jerome IBM July 2004
Remote Service Discovery in the Service Location Protocol (SLP) via DNS SRV
Status of this Memo
This memo defines an Experimental Protocol for the Internet community. It does not specify an Internet standard of any kind. Discussion and suggestions for improvement are requested. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2004).
Abstract
Remote service discovery refers to discovering desired services in given remote (i.e., non-local) DNS domains. This document describes remote service discovery in the Service Location Protocol (SLP) via DNS SRV. It defines the DNS SRV Resource Records for SLP Directory Agent services, discusses various issues in using SLP and DNS SRV together for remote service discovery, and gives the steps for discovering desired services in remote DNS domains.
This document describes remote service discovery in the Service Location Protocol (SLP) [RFC2608] via DNS SRV [RFC2782]. We consider remote service discovery as discovering desired services in given remote DNS domains, and local service discovery as discovering desired services within the local administrative domain.
SLP provides a scalable framework for local service discovery and selection. In SLP, User Agents (UAs) discover desired services in the local administrative domain by querying all Service Agents (SAs) via multicast or querying a Directory Agent (DA) via unicast. To
Zhao, et al. Experimental [Page 1]
RFC 3832 Remote Discovery in SLP via DNS SRV July 2004
query a DA using unicast, a UA needs to first learn about the DA via DHCP, static configuration or multicast (listening for DAAdvert multicast or issuing DA discovery SrvRqst multicast).
DNS SRV provides good support for remote service discovery. However, if multiple servers are discovered via DNS SRV for a service, only priority and weight can be used to make a selection. If additional service properties (such as cost, speed and service quality) need to be considered in the selection process, DNS SRV becomes insufficient.
We propose that using SLP and DNS SRV together can provide better support for remote service discovery. First, a UA uses DNS SRV to find SLP DAs at a remote DNS domain. Then, the UA uses SLP to query one of those DAs to discover desired services. In this way, we can avoid the limitations in using SLP and DNS SRV separately. On one hand, without DNS SRV, an SLP UA needs to depend on static configuration to learn about remote DAs because DHCP and multicast DA discovery are not generally applicable beyond the local administrative domain. On the other hand, without SLP, DNS SRV has limited support for service selection.
In this document, we first define the DNS SRV Resource Records (RRs) for SLP DA services, which are used to map a given DNS domain to remotely accessible (i.e., accessible from the Internet) DAs in that domain. Then, we discuss various issues in using SLP and DNS SRV together for remote service discovery. Finally, we give the steps for discovering services in remote DNS domains.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, RFC 2119 [RFC2119].
According to RFC 2782 [RFC2782], the DNS SRV RRs for SLP DA services are defined as follows:
_slpda._Proto.Name TTL Class SRV Priority Weight Port Target
where "slpda" is the symbolic name for SLP DA services, the Proto field is either "tcp" or "udp", and the Target field is the domain name of an SLP DA. Please refer to [RFC2782] for detailed explanation of each field in DNS SRV RRs.
Zhao, et al. Experimental [Page 2]
RFC 3832 Remote Discovery in SLP via DNS SRV July 2004
Next we show an example of using DNS SRV RRs to map a given DNS domain to remotely accessible DAs in that domain. To discover remotely accessible DAs in a remote domain (say, example.com), a UA makes a DNS query [RFC1034,RFC1035] for QNAME=_slpda._tcp.example.com (or QNAME=_slpda._udp.example.com), QCLASS=IN, and QTYPE=SRV. Then the UA will receive a list of DNS SRV RRs in a DNS reply, which gives all remotely accessible DAs in the domain example.com, such as:
;; Priority Weight Port Target _slpda._tcp.example.com IN SRV 0 0 427 da1.example.com _slpda._tcp.example.com IN SRV 0 0 427 da2.example.com
SLP DAs can be discovered in two ways: (1) using the mechanisms described in RFC 2608, and (2) using DNS SRV RRs as described in this document. The second approach is useful for UAs to acquire service information for remote DNS domains. For example, a mobile node visiting a network (without the use of mobile IP) may want to obtain information about services in its home network.
3.1. The DNS Domain of Interest for Remote Service Discovery
Using DNS SRV RRs to discover SLP DAs requires knowledge of the domain where SLP DAs are registered. For remote service discovery, it is assumed that the DNS domain of interest is known via a priori knowledge. For example, a UA is configured with a domain name or the user provides the domain name manually.
Note that there is no implied "search order" of DNS domains in finding remote DAs. For instance, if a UA is looking for remote DAs in the domain foo.bar.example.com, it SHOULD only look for _slp._tcp.foo.bar.example.com (or _slp._udp.foo.bar.example.com), and MUST NOT fall back to look for _slp._tcp.bar.example.com, _slp._tcp.example.com, and so on.
A UA discovers desired services in a given remote DNS domain by unicasting requests to DAs in that domain. The UA uses remote DAs according to these prioritized rules: (1) using DAs which it has been configured with, and (2) using DAs which it has discovered via DNS SRV.
Zhao, et al. Experimental [Page 3]
RFC 3832 Remote Discovery in SLP via DNS SRV July 2004
As SLP scopes are intended to be used only within one administrative domain, they are likely incomprehensible to users outside of the administrative domain. Thus, any remotely accessible service MUST be registered in the "default" scope, but it MAY be registered in other scopes at the same time. Similarly, all DAs advertised via DNS SRV MUST serve the "default" scope, but they MAY serve other scopes at the same time. As a result, users wishing to discover services at a remote DNS domain SHOULD only search the "default" scope.
The steps for a User Agent U to discover desired services in a remote DNS domain D are as follows.
(1) U makes a DNS query for QNAME=_slpda._tcp.D (or QNAME=_slpda._udp.D), QCLASS=IN, and QTYPE=SRV. Then, U gets a list of DNS SRV RRs (referred to as L) in a DNS reply, which gives all remotely accessible DAs in D.
(2) U selects a DA X from L based on the priority and weight information per RFC 2782.
(3) U queries X in the "default" scope to discover desired services in D.
Note that the services discovered in the above steps may not necessarily be remotely accessible.
To support remote service discovery, a domain exposes its service information to the Internet. Standard SLP authentication SHOULD be used to protect valuable service information. First, there is a risk that any SA could advertise any service on a DA accessible from the Internet. Such a DA SHOULD reject all registrations and deregistrations that cannot be authenticated. Secondly, to avoid disclosing unintended service information to remote users, a DA accessible from the Internet SHOULD at least authenticate service queries that are not in the "default" scope. In addition, the security considerations for DNS SRV [RFC2782] apply to this document. Also, the DNS security extensions [RFC 2535] SHOULD be used to provide origin authentication and integrity protection for DNS data.
Zhao, et al. Experimental [Page 4]
RFC 3832 Remote Discovery in SLP via DNS SRV July 2004
This specification describes remote service discovery in SLP via DNS SRV. It facilitates discovering services at a remote DNS domain if the domain name is known via a priori knowledge. However, it does not intend to solve the problem of Internet-wide service discovery.
Users should be aware of two constraints in using DNS SRV to discover SLP DAs: (1) they SHOULD only use DNS SRV to discover DAs in the "default" scope, and (2) an administrator may choose to register only a subset of all DAs in the "default" scope via DNS SRV. Thus, to discover local DAs, implementations MUST use the standard SLP mechanisms per RFC 2608. In addition, implementations supporting this specification MAY use DNS SRV to discover local DAs in the "default" scope.
As SLP scopes are not intended to be used outside the local administrative domain, all remote service discovery in SLP SHOULD be carried only in the "default" scope.
Note that the services discovered via DNS SRV and remote SLP DAs may not necessarily be remotely accessible.
In the DNS SRV RRs for SLP DA services, the symbolic name for the Service field is "slpda", supported protocols are "tcp" and "udp". The following values have been registered with IANA:
Service Field Protocol Field Reference ------------- -------------- --------- slpda tcp [RFC3832] slpda udp [RFC3832]
The authors would like to thank Bernard Aboba, Kevin Arnold, Steven Bellovin, Ted Hardie, James Kempf, Thomas Narten, Erik Nordmark, and Jon Peterson for their valuable comments.
Copyright (C) The Internet Society (2004). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the Internet Society.