Network Working Group K. Gibbons Request for Comments: 4939 2Wire, Inc. Category: Standards Track G. Ramkumar SnapTell, Inc. S. Kipp Brocade, Inc. July 2007
Definitions of Managed Objects for iSNS (Internet Storage Name Service)
Status of This Memo
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The IETF Trust (2007).
Abstract
The iSNS (Internet Storage Name Service) protocol provides storage name service functionality on an IP network that is being used for iSCSI (Internet Small Computer System Interface) or iFCP (Internet Fibre Channel Protocol) storage. This document provides a mechanism to monitor multiple iSNS Servers, including information about registered objects in an iSNS Server.
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
The iSNS protocol, as described in RFC 4171 [RFC4171], can be used by IP-based storage devices for dynamic registration and discovery of other storage devices in the network. It has the capability to group devices into storage Discovery Domains, and Discovery Domains into Discovery Domain Sets. The iSNS MIB is designed to allow Simple Network Management Protocol (SNMP) to be used to monitor iSNS servers supporting iSCSI [RFC3720] and iFCP [RFC4172].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
The isnsServerInfo section provides the ability to monitor multiple iSNS Server instances. The isnsServerTable table provides information on each server instance. This table is indexed by the variable isnsServerIndex. The table indicates current settings for each iSNS server being managed. The network address, TCP and UDP ports being used by a server for iSNSP registrations and queries can be determined from this table.
The count of objects registered in each iSNS server instance is shown in the table isnsNumObjectsTable. The provides a summary of the number Discovery Domain Sets, Discovery Domains, Entities, Portals, Portal Groups, iSCSI Nodes, and iFCP FC Nodes and Ports.
As defined in the iSNS specification, Control Nodes are objects that have been registered with the server and are allowed to manage the iSNS server. These Control Nodes are identified by their iSCSI Node Name or iFCP FC Port Name. The isnsControlNodeInfo section of the MIB provides the ability to view the currently registered set of iSCSI and iFCP control nodes.
The isnsDdsInfo section provides information on each registered DDS, the Discovery Domain members of each DDS, for each iSNS Server instance being managed. DDSs provide a method to group multiple Discovery Domains for easier control. As described in the iSNS Specification [RFC4171], a DDS can be enabled or disabled, which in turn enables or disables the member Discovery Domains. Discovery Domains that are contained in an enabled DDS are then enforced by an iSNS Server.
The isnsDdInfo section provides information on each registered DD, and the DD members, for each iSNS Server instance being managed. DDs are collections of storage nodes and portals that are allowed to discover one another. DD members can be iSCSI nodes, Entity Portals, or iFCP nodes.
The isnsReg section provides information on the registered storage objects for a specific iSNS Server instance. This section is divided into subsections for Entities, Portals, and iSCSI Nodes, as well as iFCP Port and Node information.
The isnsRegPortalInfo section provides information on the registered portals for a specific iSNS Server instance. Portals are logical IP-Address, TCP/UDP Port pairs that provide access to storage nodes contained in the associated Entity.
The isnsRegPortalGroupInfo section provides information on the registered portal groups for a specific iSNS Server instance. As described in iSCSI [RFC3720], Portal Groups provide a mapping between Portals and iSCSI Storage Nodes contained in an Entity.
The isnsRegIscsiNodeInfo section provides information on the registered iSCSI Nodes for a specific iSNS Server instance. The iSCSI nodes are individual storage targets or initiators.
The isnsRegFcPortInfo section provides information on the registered FC Ports for a specific iSNS Server instance. The FC Ports are ports associated with an iFCP gateway.
The isnsRegFcNodeInfo section provides information on the registered FC Nodes for a specific iSNS Server instance. The FC nodes are individual storage devices associated with an iFCP gateway.
The management of multiple instances of iSNS servers by the agent is supported. As described in Section 3.3, each managed iSNS server instance has an entry in the table isnsServerTable.
ORGANIZATION "IETF IPS Working Group" CONTACT-INFO " Attn: Kevin Gibbons 2Wire, Inc. 1704 Automation Parkway San Jose, CA 95131 USA Tel: +1 408-895-1387 Fax: +1 408-428-9590 Email: kgibbons@yahoo.com
G.D. Ramkumar SnapTell, Inc. 2741 Middlefield Rd, Suite 200 Palo Alto, CA 94306 USA Tel: +1 650-326-7627 Fax: +1 650-326-7620 Email: gramkumar@stanfordalumni.org
Scott Kipp Brocade 4 McDATA Pkwy Broomfield, CO 80021 USA Tel: +1 720-558-3452 Fax: +1 720-558-8999 Email: skipp@brocade.com "
DESCRIPTION "This module defines management information specific to internet Storage Name Service (iSNS) management.
Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC 4939; see the RFC itself for full legal notices."
REVISION "200707110000Z"
DESCRIPTION "Initial version of iSNS Management Module. This MIB published as RFC 4939." ::= { mib-2 163 }
Gibbons, et al. Standards Track [Page 9]
RFC 4939 iSNS MIB July 2007
-- -- Textual Conventions --
IsnsDiscoveryDomainSetId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The unique Discovery Domain Set Identifier associated with a Discovery Domain Set (DDS)." REFERENCE "RFC 4171, Section 6.11.1.1" SYNTAX Unsigned32 ( 1 .. 4294967295 )
IsnsDdsStatusType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of a Discovery Domain Set (DDS) registered in the iSNS. The initially assigned values are below: Bit Status --------- --------- 31 DDS Enabled All others RESERVED
Setting a bit to 1 indicates the feature is enabled. Otherwise, it is disabled. The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.11.1.3" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), reserved15(15), reserved16(16), reserved17(17), reserved18(18), reserved19(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), reserved24(24), reserved25(25), reserved26(26), reserved27(27), reserved28(28), reserved29(29), reserved30(30), ddsEnabled (31) }
IsnsDiscoveryDomainId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The unique Discovery Domain Identifier (DD_ID) associated
Gibbons, et al. Standards Track [Page 10]
RFC 4939 iSNS MIB July 2007
with each Discovery Domain (DD). This is used to uniquely index and reference a DD." REFERENCE "RFC 4171, Section 6" SYNTAX Unsigned32 ( 1 .. 4294967295 )
IsnsDdFeatureType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This type defines the features that each Discovery Domain (DD) has. Bit Status --------- --------- 31 Boot List All others RESERVED
Boot List: this feature indicates that the targets in this DD provide boot capabilities for the member initiators.
Setting a bit to 1 indicates the feature is enabled. Otherwise, it is disabled. The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.11.2.9" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), reserved15(15), reserved16(16), reserved17(17), reserved18(18), reserved19(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), reserved24(24), reserved25(25), reserved26(26), reserved27(27), reserved28(28), reserved29(29), reserved30(30), bootlist(31) }
IsnsDdDdsModificationType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The methods that can be used to modify the Discovery Domain and Discovery Domain Sets in an iSNS Server instance. Bit Flag Description --------- ------------------------------------ 0 Control Nodes are allowed
Gibbons, et al. Standards Track [Page 11]
RFC 4939 iSNS MIB July 2007
1 Target iSCSI Nodes are allowed 2 Initiator iSCSI Nodes are allowed 3 Target iFCP Ports are allowed 4 Initiator iFCP Ports are allowed
Setting a bit to 1 indicates the feature is enabled. Otherwise, it is disabled." REFERENCE "RFC 4171, Section 2.4" SYNTAX BITS { controlNode(0), targetIscsiNode(1), initiatorIscsiNode(2), targetIfcpNode(3), initiatorIfcpNode(4) }
IsnsEntityIndexIdOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The identifier for the unique integer Entity Index associated with an iSNS registered Entity object, and the value zero. The value zero is object-specific and MUST therefore be defined as part of the description of any object that uses this syntax. Examples of the usage of zero might include situations where the Entity is unknown, or not yet registered in the iSNS server. If a value of zero is not valid for an object, then that MUST be indicated." REFERENCE "RFC 4171, Section 6" SYNTAX Unsigned32 ( 0 .. 4294967295 )
IsnsPortalGroupIndexId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The identifier for the unique integer Portal Group Index associated with an iSNS registered Portal Group object." REFERENCE "RFC 4171, Section 6" SYNTAX Unsigned32 ( 1 .. 4294967295 )
IsnsPortalIndexId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The identifier for the unique integer Portal Index associated with an iSNS registered Portal object. The index is created by the iSNS Server for mapping between
Gibbons, et al. Standards Track [Page 12]
RFC 4939 iSNS MIB July 2007
registered objects. The Portal Index used for a specific portal IP-address and port number pair is only persistent across reboots for portals that have been explicitly added to a Discovery Domain (DD). If a portal is not explicitly registered in any DD, then the index used for a portal can change after a server reinitialization." REFERENCE "RFC 4171, Section 6" SYNTAX Unsigned32 ( 1 .. 4294967295 )
IsnsPortalPortTypeId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The UDP or TCP port type being used by a Portal for an Entity." REFERENCE "RFC 4171, Section 6.3.2" SYNTAX INTEGER { udp(1), tcp(2) }
IsnsPortalGroupTagIdOrNull ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The Portal Group Tag (PGT) represents an association between a Portal and iSCSI Node using the value range 0 to 65535. A PGT with no association is a NULL value. The value of -1 indicates a NULL value." REFERENCE "RFC 4171, Section 6.5.4, and RFC 3720" SYNTAX Integer32 ( -1 .. 65535 )
IsnsPortalSecurityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates security attribute settings for a Portal that is registered in the iSNS server. The bitmapVALID field must be set in order for the contents to be considered valid information. The definitions of the bit fields are based on RFC 4171. The initial representation of each bit setting (0 or 1) is indicated below. Bit Flag Description --------- ------------------------------------ 25 1 = Tunnel Mode Preferred; 0 = No Preference 26 1 = Transport Mode Preferred; 0 = No Preference 27 1 = PFS Enabled; 0 = PFS Disabled 28 1 = Aggressive Mode Enabled; 0 = Disabled 29 1 = Main Mode Enabled; 0 = MM Disabled 30 1 = IKE/IPsec Enabled; 0 = IKE/IPsec Disabled 31 1 = Bitmap VALID; 0 = INVALID
Gibbons, et al. Standards Track [Page 13]
RFC 4939 iSNS MIB July 2007
All others RESERVED
The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.3.9" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), reserved15(15), reserved16(16), reserved17(17), reserved18(18), reserved19(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), reserved24(24), tunnelModePreferred(25), transportModePreferred(26), pfsEnabled(27), agressiveModeEnabled(28), mainModeEnabled(29), ikeIPsecEnabled(30), bitmapVALID(31) }
IsnsNodeIndexId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The identifier for the unique integer Node Index associated with a storage node. This index provides a 1-to-1 mapping to an iSCSI node name. The iSCSI node name maximum length is too long to be used for an index directly. The iSCSI node index used for a specific iSCSI node name is identical in all DDs, and is persistent across server reinitializations when the iSCSI node is a member of a Discovery Domain (DD) or is registered as a Control Node. Furthermore, index values for recently deregistered objects SHOULD NOT be reused in the short term." REFERENCE "RFC 4171, Section 6.4.5" SYNTAX Unsigned32 ( 1 .. 4294967295 )
IsnsIscsiNodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The iSCSI Node Type defines the functions of the registered object. The definitions of each setting are defined in RFC 4171. Bit Node Type
Gibbons, et al. Standards Track [Page 14]
RFC 4939 iSNS MIB July 2007
--------- --------- 29 Control 30 Initiator 31 Target All others RESERVED
Setting a bit to 1 indicates the node has the corresponding characteristics. The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.4.2" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), reserved15(15), reserved16(16), reserved17(17), reserved18(18), reserved19(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), reserved24(24), reserved25(25), reserved26(26), reserved27(27), reserved28(28), control(29), initiator(30), target(31) }
IsnsFcClassOfServiceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This defines the Fibre Channel Class of Service types that are supported by the registered port. The definitions are as defined in RFC 4171. Bit FC COS Type --------- ---------------- 28 Fibre Channel Class 3 Supported 29 Fibre Channel Class 2 Supported All others RESERVED
Setting a bit to 1 indicates the class of service is supported. The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.6.8" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8),
IsnsIscsiScnType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The iSCSI Node State Change Notification (SCN) values for a node as defined in RFC 4171. Bit Description ------------ ---------------- 24 Initiator and self information only 25 Target and self information only 26 Management registration/SCN 27 Object removed 28 Object added 29 Object updated 30 DD or DDS member removed (Mgmt Reg/SCN only) 31 (Lsb) DD or DDS member added (Mgmt Reg/SCN only) All others Reserved
Setting a bit to 1 indicates that type of SCN is enabled. The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.4.4" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), reserved15(15), reserved16(16), reserved17(17), reserved18(18), reserved19(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), initiatorAndSelfOnly(24), targetAndSelfOnly(25), managementRegistrationScn(26), objectRemoved(27), objectAdded(28),
IsnsIfcpScnType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The iFCP State Change Notification (SCN) values for an iFCP object as defined in RFC 4171. Bit Description ------------ ---------------- 24 Initiator and self information only 25 Target and self information only 26 Management registration/SCN 27 Object removed 28 Object added 29 Object updated 30 DD or DDS member removed (Mgmt Reg/SCN only) 31 (Lsb) DD or DDS member added (Mgmt Reg/SCN only) All others Reserved
Setting a bit to 1 indicates that type of SCN is enabled. The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.6.12" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), reserved15(15), reserved16(16), reserved17(17), reserved18(18), reserved19(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), initiatorAndSelfOnly(24), targetAndSelfOnly(25), managementRegistrationScn(26), objectRemoved(27), objectAdded(28), objectUpdated(29), ddOrDdsMemberRemoved(30), ddOrDdsMemberAdded(31) }
IsnsFcPortRoleType ::= TEXTUAL-CONVENTION
Gibbons, et al. Standards Track [Page 17]
RFC 4939 iSNS MIB July 2007
STATUS current DESCRIPTION "The FC Port Role defines the functions of the registered object. The definitions of each setting are defined in RFC 4171. Bit Port Role --------- --------- 29 Control 30 FCP Initiator 31 FCP Target All others RESERVED
Setting a bit to 1 indicates the port has the corresponding characteristics. The future assignment of any of the reserved values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.6.13" SYNTAX BITS { reserved0(0), reserved1(1), reserved2(2), reserved3(3), reserved4(4), reserved5(5), reserved6(6), reserved7(7), reserved8(8), reserved9(9), reserved10(10), reserved11(11), reserved12(12), reserved13(13), reserved14(14), reserved15(15), reserved16(16), reserved17(17), reserved18(18), reserved19(19), reserved20(20), reserved21(21), reserved22(22), reserved23(23), reserved24(24), reserved25(25), reserved26(26), reserved27(27), reserved28(28), control(29), initiator(30), target(31) }
IsnsSrvrDiscoveryMethodsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The types of iSNS Server discovery methods that are enabled on an iSNS Server. The options are DHCP, Service Location Protocol (SLP), multicast group iSNS heartbeat, broadcast group iSNS heartbeat, configured server list, and other. The iSNS Server may support additional discovery methods not indicated." REFERENCE "RFC 4171, Section 2.5" SYNTAX BITS { dhcp(0), slp(1), multicastGroupHb(2), broadcastHb(3),
isnsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides a list of the iSNS Server instances that are managed through the same SNMP context." ::= { isnsServerInfo 1 }
isnsServerEntry OBJECT-TYPE SYNTAX IsnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a row in the iSNS Server instance table. The number of rows is dependent on the number of iSNS Server instances that are being managed through the same SNMP context." INDEX { isnsServerIndex } ::= { isnsServerTable 1 }
isnsServerIndex OBJECT-TYPE SYNTAX Unsigned32 ( 1 .. 4294967295 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object uniquely identifies the iSNS Server being managed by the SNMP context and is the key for this table. This is an instance index for each iSNS Server being managed. The value of this object is used elsewhere in the MIB to reference specific iSNS Servers." ::= { isnsServerEntry 1 }
isnsServerName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A non-unique name that can be assigned to the iSNS Server instance. If not configured, then the string SHALL be zero-length." ::= { isnsServerEntry 2 }
MAX-ACCESS read-only STATUS current DESCRIPTION "The iSNS version value as contained in messages received from the current primary server. The header of each iSNSP message contains the iSNS version of the sender. If unknown, the reported value is 0." REFERENCE "RFC 4171" DEFVAL { 1 } ::= { isnsServerEntry 3 }
isnsServerVendorInfo OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "If this server instance is utilizing the product of a particular 'vendor', then this managed object contains that vendor's name and version. Otherwise, the string SHALL be zero-length. The format of the string is as follows: Vendor Name, Vendor Version, Vendor Defined Information.
Field Description --------- ---------------- Vendor Name The name of the vendor (if one exists) Vendor Version The version of the vendor product Vendor Defined This follows the second comma in the string, if one exists, and is vendor defined " ::= { isnsServerEntry 4 }
isnsServerPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An index identifying the network interface for this iSNS Server within a network entity. This index maps to the entPhysicalIndex of entPhysicalTable table in RFC 4133. The entPhysicalClass value for the table row must be 'port', as the interface must be able to send and receive data." REFERENCE "RFC 4133, RFC 4171, Section 2.5 - 2.8" ::= { isnsServerEntry 5 }
MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the TCP port this iSNS instance is accepting iSNSP messages on, generally the iSNS well-known port. The well-known TCP port for iSNSP is 3205. If TCP is not supported by this server instance, then the value is 0." ::= { isnsServerEntry 6 }
isnsServerUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the UDP port this iSNS instance is accepting iSNSP messages on; generally, the iSNS well-known port. The well-known UDP port for iSNSP is 3205. If UDP is not supported by this server instance, then the value is 0." ::= { isnsServerEntry 7 }
isnsServerDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion that this iSNS server became active or suffered a discontinuity." ::= { isnsServerEntry 8 }
isnsServerRole OBJECT-TYPE SYNTAX INTEGER { notSet(1), server(2), backupServer(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational mode of this iSNS Server instance.
Value Description --------- ---------------- notSet The iSNS Server role is not configured. server The iSNS Server instance is an operational iSNS Server. backupServer The iSNS Server instance is
Gibbons, et al. Standards Track [Page 22]
RFC 4939 iSNS MIB July 2007
currently acting as a backup." REFERENCE "RFC 4171, Section 2.7 - 2.8" ::= { isnsServerEntry 9 }
isnsServerDiscoveryMethodsEnabled OBJECT-TYPE SYNTAX IsnsSrvrDiscoveryMethodsType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the discovery methods currently enabled for this iSNS Server instance. This allows a client to determine what discovery methods can be used for this iSNS Server. Additional methods of discovery may also be supported." ::= { isnsServerEntry 10 }
isnsServerDiscoveryMcGroupType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Internet address in isnsServerDiscoveryMcGroupAddress. If the address is specified, then it must be a valid multicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsServerDiscoveryMcGroupAddress is the zero-length string." ::= { isnsServerEntry 11 }
isnsServerDiscoveryMcGroupAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The multicast group that iSNS Heartbeat messages are sent to if multicast-based discovery has been enabled for this server instance. If not configured, then the string SHALL be zero-length. The format of this object is specified by isnsServerDiscoveryMcGroupType." ::= { isnsServerEntry 12 }
isnsServerEsiNonResponseThreshold OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "Entity Status Inquiry (ESI) Non-Response Threshold -
Gibbons, et al. Standards Track [Page 23]
RFC 4939 iSNS MIB July 2007
the number of ESI messages that will be sent without receiving a response before an entity is deregistered from the iSNS database. A value of 0 indicates Entities will never be deregistered due to non-receipt of ESI messages." REFERENCE "RFC 4171, Section 2.4" DEFVAL { 3 } ::= { isnsServerEntry 13 }
isnsServerEnableControlNodeMgtScn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the iSNS Server administrative option to send Management SCNs to Control Nodes is enabled. Management SCNs are used by Control Nodes to monitor and control an iSNS Server. If enabled, Control Nodes can register to receive Management SCNs." REFERENCE "RFC 4171, Section 2.2.3, 2.4" DEFVAL { true } ::= { isnsServerEntry 14 }
isnsServerDefaultDdDdsStatus OBJECT-TYPE SYNTAX INTEGER { inNoDomain(1), inDefaultDdAndDds(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the Discovery Domain (DD) and Discovery Domain Set (DDS) membership status for a new device when registered in the iSNS Server instance. Either the new device will not be in a DD/DDS, or will be placed into a default DD and default DDS. The default setting is inNoDomain." REFERENCE "RFC 4171, Section 2.4" DEFVAL { inNoDomain } ::= { isnsServerEntry 15 }
isnsServerUpdateDdDdsSupported OBJECT-TYPE SYNTAX IsnsDdDdsModificationType MAX-ACCESS read-only STATUS current DESCRIPTION "The methods that this iSNS Server instance supports to modify Discovery Domains and Discovery Domain Sets." REFERENCE "RFC 4171, Section 2.4" ::= { isnsServerEntry 16 }
Gibbons, et al. Standards Track [Page 24]
RFC 4939 iSNS MIB July 2007
isnsServerUpdateDdDdsEnabled OBJECT-TYPE SYNTAX IsnsDdDdsModificationType MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the methods this server instance currently allows for modifying Discovery Domains and Discovery Domain Sets." REFERENCE "RFC 4171, Sec 2.2.2 and 2.4" ::= { isnsServerEntry 17 }
-- -- Count of objects currently registered in a server instance --
isnsNumObjectsTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsNumObjectsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table providing the number of registered objects of each type in the iSNS Server instance. The number of entries is dependent upon the number of iSNS Server instances being managed." ::= { isnsServerInfo 2 }
isnsNumObjectsEntry OBJECT-TYPE SYNTAX IsnsNumObjectsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of an iSNS Server instance." AUGMENTS { isnsServerEntry } ::= { isnsNumObjectsTable 1 }
isnsNumDds OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of Discovery Domain Sets in this iSNS instance. This is the number of rows in the isnsDdsTable." ::= { isnsNumObjectsEntry 1 }
isnsNumDd OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of Discovery Domains in this iSNS instance. This is the number of rows in the isnsDdTable." ::= { isnsNumObjectsEntry 2 }
isnsNumEntities OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of Entities registered in this iSNS Server instance. This is the number of rows in the isnsRegEntityTable for this instance." ::= { isnsNumObjectsEntry 3 }
isnsNumPortals OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of Portals registered in iSNS. This is the number of rows in isnsRegPortalTable." ::= { isnsNumObjectsEntry 4 }
isnsNumPortalGroups OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of Portal Groups registered in iSNS. This is the number of rows in isnsRegPgTable." ::= { isnsNumObjectsEntry 5 }
Gibbons, et al. Standards Track [Page 26]
RFC 4939 iSNS MIB July 2007
isnsNumIscsiNodes OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of iSCSI node entries registered in the iSNS. This is the number rows in isnsRegIscsiNodeTable." ::= { isnsNumObjectsEntry 6 }
isnsNumFcPorts OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of FC Port entries registered in the iSNS. This is the number of rows in isnsRegFcPortTable." ::= { isnsNumObjectsEntry 7 }
isnsNumFcNodes OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The current total number of FC node entries registered in the iSNS. This is the number of rows in isnsRegFcNodeTable." ::= { isnsNumObjectsEntry 8 }
-- -- Specific iSCSI Nodes authorized to register as Control -- Nodes --
isnsControlNodeIscsiTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsControlNodeIscsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
Gibbons, et al. Standards Track [Page 27]
RFC 4939 iSNS MIB July 2007
"Specified iSCSI Nodes that can register or are registered as control nodes. The number of rows is dependent on the number of iSCSI Control Nodes." ::= { isnsControlNodeInfo 1 }
isnsControlNodeIscsiEntry OBJECT-TYPE SYNTAX IsnsControlNodeIscsiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an iSCSI Control Node entry for a specific iSNS server instance." INDEX { isnsServerIndex, isnsControlNodeIscsiNodeIndex } ::= { isnsControlNodeIscsiTable 1 }
isnsControlNodeIscsiNodeIndex OBJECT-TYPE SYNTAX IsnsNodeIndexId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the iSCSI storage node authorized to act as a control node." ::= { isnsControlNodeIscsiEntry 1 }
isnsControlNodeIscsiNodeName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI Name of the initiator or target associated with the storage node. The iSCSI Name cannot be longer than 223 bytes. The iSNS Server internal maximum size is 224 bytes to provide NULL termination. This is the iSCSI Node Name for the storage node authorized and/or acting as a control node." ::= { isnsControlNodeIscsiEntry 2 }
STATUS current DESCRIPTION "Indicates whether the control node is currently registered in the iSNS Server instance." ::= { isnsControlNodeIscsiEntry 3 }
isnsControlNodeIscsiRcvMgtSCN OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Control Node has registered to receive Management SCNs. Management SCNs are sent to a Control Node if they are enabled, as indicated by isnsServerEnableControlNodeMgtScn, and the Control Node has registered for them." REFERENCE "RFC 4171, Section 2.2.3, 2.4" ::= { isnsControlNodeIscsiEntry 4 }
-- -- Specific FC Ports authorized to register as Control -- Nodes --
isnsControlNodeFcPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsControlNodeFcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specified FC Ports that can register or are registered as control nodes. The number of rows is dependent on the number of FC Port Control Nodes." ::= { isnsControlNodeInfo 2 }
isnsControlNodeFcPortEntry OBJECT-TYPE SYNTAX IsnsControlNodeFcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "FC Port control node entry." INDEX { isnsServerIndex, isnsControlNodeFcPortWwpn } ::= { isnsControlNodeFcPortTable 1 }
isnsControlNodeFcPortWwpn OBJECT-TYPE SYNTAX FcNameIdOrZero (SIZE(8)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FC Port World Wide Port Name that can and/or is acting as a Control Node for the specified iSNS Server. A zero- length string is not valid for this managed object. This managed object, combined with the isnsServerIndex, is the key for this table." ::= { isnsControlNodeFcPortEntry 1 }
isnsControlNodeFcPortIsRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the control node is currently registered in the iSNS Server instance." ::= { isnsControlNodeFcPortEntry 2 }
isnsControlNodeFcPortRcvMgtSCN OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the Control Node has registered to receive Management SCNs. Management SCNs are sent to a Control Node if they are enabled, as indicated by isnsServerEnableControlNodeMgtScn, and the Control Node has registered for them." REFERENCE "RFC 4171, Section 2.2.3, 2.4" ::= { isnsControlNodeFcPortEntry 3 }
-- -- Discovery Domain Set Registrations ----------------- --
isnsDdsTable OBJECT-TYPE
Gibbons, et al. Standards Track [Page 30]
RFC 4939 iSNS MIB July 2007
SYNTAX SEQUENCE OF IsnsDdsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing configuration information for each Discovery Domain Set (DDS) registered in the iSNS Server instance. The number of rows in the table is dependent on the number of DDSs registered in the specified iSNS server instance." ::= { isnsDdsInfo 1 }
isnsDdsEntry OBJECT-TYPE SYNTAX IsnsDdsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one Discovery Domain Set (DDS) registered in the iSNS Server instance." INDEX { isnsServerIndex, isnsDdsId} ::= { isnsDdsTable 1 }
isnsDdsId OBJECT-TYPE SYNTAX IsnsDiscoveryDomainSetId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID that refers to this Discovery Domain Set and index to the table." ::= { isnsDdsEntry 1 }
isnsDdsSymbolicName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Discovery Domain Set Symbolic Name field contains a unique variable-length description (up to 255 bytes) that is associated with the DDS. If a Symbolic Name is not provided, then one will be generated by the iSNS server." REFERENCE "RFC 4171, Section 6"
Gibbons, et al. Standards Track [Page 31]
RFC 4939 iSNS MIB July 2007
::= { isnsDdsEntry 2 }
isnsDdsStatus OBJECT-TYPE SYNTAX IsnsDdsStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this Discovery Domain Set (DDS)." REFERENCE "RFC 4171, Section 6.11.1.3" ::= { isnsDdsEntry 3 }
-- -- Discovery Domain Set Members -------------------- --
-- -- DDS Membership Assignment --
isnsDdsMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsDdsMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing Discovery Domains (DDs) that have been assigned to specific Discovery Domain Sets (DDSs). The number of rows in the table is dependent on the number of DD to DDS relationships in the iSNS instance." ::= { isnsDdsInfo 2 }
isnsDdsMemberEntry OBJECT-TYPE SYNTAX IsnsDdsMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapping of one Discovery Domain (DD) to a Discovery Domain Set (DDS). This indicates the DD is a member of the DDS." INDEX { isnsServerIndex, isnsDdsId, isnsDdsMemberDdId } ::= { isnsDdsMemberTable 1 }
isnsDdsMemberDdId OBJECT-TYPE SYNTAX IsnsDiscoveryDomainId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID that identifies the Discovery Domain that is a member of the Discovery Domain Set." ::= { isnsDdsMemberEntry 1 }
isnsDdsMemberSymbolicName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Symbolic Name of the Discovery Domain that is a member of this DDS. This value SHALL be identical to the object isnsDdSymbolicName for the associated DD ID." REFERENCE "RFC 4171, Section 6" ::= { isnsDdsMemberEntry 2 }
isnsDdTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsDdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing configuration information for each Discovery Domain (DD) registered in the iSNS. The number of rows in the table is dependent on the number of DDs registered in the iSNS instance." ::= { isnsDdInfo 1 }
isnsDdEntry OBJECT-TYPE SYNTAX IsnsDdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
Gibbons, et al. Standards Track [Page 33]
RFC 4939 iSNS MIB July 2007
"Information on a Discovery Domain (DD) registered in the iSNS Server instance." INDEX { isnsServerIndex, isnsDdId} ::= { isnsDdTable 1 }
isnsDdId OBJECT-TYPE SYNTAX IsnsDiscoveryDomainId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID that refers to this Discovery Domain, and the index to the table." REFERENCE "RFC 4171, Section 6" ::= { isnsDdEntry 1 }
isnsDdSymbolicName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Discovery Domain Symbolic Name field contains a unique variable-length description (up to 255 bytes) that is associated with the DD." REFERENCE "RFC 4171, Section 6" ::= { isnsDdEntry 2 }
isnsDdFeatures OBJECT-TYPE SYNTAX IsnsDdFeatureType MAX-ACCESS read-only STATUS current DESCRIPTION "This defines the features the Discovery Domain has." REFERENCE "RFC 4171, Section 6.11.2.9" ::= { isnsDdEntry 3 }
Gibbons, et al. Standards Track [Page 34]
RFC 4939 iSNS MIB July 2007
-- -- Discovery Domain Members -------------------- --
-- -- DD iSCSI Node Membership Assignment --
isnsDdIscsiMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsDdIscsiMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing iSCSI node indexes that have been assigned to specific DDs in this iSNS Server instance. The number of rows in the table is dependent on the number of relationships between iSCSI Nodes and DDs registered in the iSNS instance." ::= { isnsDdInfo 2 }
isnsDdIscsiMemberEntry OBJECT-TYPE SYNTAX IsnsDdIscsiMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapping of one iSCSI Node to a Discovery Domain to indicate membership in the DD. The indexes are the iSNS server instance, the DD ID of the Discovery Domain, and the iSCSI Node Index of the iSCSI Node." INDEX { isnsServerIndex, isnsDdId, isnsDdIscsiMemberIndex } ::= { isnsDdIscsiMemberTable 1 }
isnsDdIscsiMemberIndex OBJECT-TYPE SYNTAX IsnsNodeIndexId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for this member iSCSI node entry."
isnsDdIscsiMemberName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..223)) MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI Name associated with the storage node. The iSCSI Name cannot be longer than 223 bytes. The iSNS server internal maximum size is 224 bytes to provide NULL termination. This is the iSCSI Name for the storage node that is a member of the DD. This value maps 1 to 1 to the isnsDdIscsiMemberIndex node index. The iSCSI Name field is too long to be easily used for an index directly. The node index used for a specific node name is only persistent across iSNS Server reinitializations for nodes that are in a Discovery Domain (DD) or are registered control nodes. This value is only required during row creation if the storage node is not yet registered in the iSNS Server instance. If the storage node is not yet registered, then the iSCSI Name MUST be provided with the iSCSI node index during row creation in order to create the 1-to-1 mapping." REFERENCE "RFC 4171, Section 6" ::= { isnsDdIscsiMemberEntry 2 }
isnsDdIscsiMemberIsRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether this member of the DD is currently registered in the iSNS Server instance. iSCSI Storage Node members do not need to be currently registered in order for their iSCSI Name and Index to be added to a DD." REFERENCE "RFC 4171, Section 6.11" ::= { isnsDdIscsiMemberEntry 3 }
-- -- DD Portal Membership Assignment --
isnsDdPortalMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsDdPortalMemberEntry MAX-ACCESS not-accessible
Gibbons, et al. Standards Track [Page 36]
RFC 4939 iSNS MIB July 2007
STATUS current DESCRIPTION "A table containing currently registered and unregistered portal objects that have been explicitly assigned to specific DDs. Explicit assignment of a portal to a DD is only done when a specific set of portals are preferred for use within a DD. Otherwise, for iSCSI, the Portal Group Object should be used for identifying which portals provide access to which storage nodes. The number of rows in the table is dependent on the number of explicit relationships between portals and DDs registered in the iSNS." REFERENCE "RFC 4171, Section 6" ::= { isnsDdInfo 3 }
isnsDdPortalMemberEntry OBJECT-TYPE SYNTAX IsnsDdPortalMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry indicates an explicit addition of a portal to a discovery domain. The explicit addition of an entity portal to a discovery domain indicates the portal is preferred for access to nodes of the entity for this discovery domain. Registered Portal Group objects are used in iSCSI to indicate mapping of portals to nodes across all discovery domains. Portals that have been explicitly mapped to a discovery domain will be returned as part of a query that is scoped to that discovery domain. If no portal of an entity has been explicitly mapped to a discovery domain, then all portals of the entity that provide access to a storage node are returned as part of a query. The table indexes are the server instance, the DD ID of the Discovery Domain, and the Portal Index of the portal." INDEX { isnsServerIndex, isnsDdId, isnsDdPortalMemberIndex } ::= { isnsDdPortalMemberTable 1 }
isnsDdPortalMemberIndex OBJECT-TYPE SYNTAX IsnsPortalIndexId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for a portal explicitly contained in the discovery domain. This managed object, combined with isnsServerIndex and isnsDdId, is the key for this table." REFERENCE "RFC 4171, Section 6" ::= { isnsDdPortalMemberEntry 1 }
isnsDdPortalMemberAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet address in isnsDdPortalMemberAddress. If the address is specified, then it must be a valid unicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsDdPortalMemberAddress is the zero-length string." ::= { isnsDdPortalMemberEntry 2 }
isnsDdPortalMemberAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Inet Address for the portal. The format of this object is specified by isnsDdPortalMemberAddressType." REFERENCE "RFC 4171, Section 6" ::= { isnsDdPortalMemberEntry 3 }
isnsDdPortalMemberPortType OBJECT-TYPE SYNTAX IsnsPortalPortTypeId MAX-ACCESS read-only STATUS current DESCRIPTION "The port type for the portal, either UDP or TCP." REFERENCE "RFC 4171, Section 6" ::= { isnsDdPortalMemberEntry 4 }
isnsDdPortalMemberPort OBJECT-TYPE SYNTAX InetPortNumber ( 1 .. 65535 ) MAX-ACCESS read-only STATUS current
Gibbons, et al. Standards Track [Page 38]
RFC 4939 iSNS MIB July 2007
DESCRIPTION "The port number for the portal. Whether the portal type is TCP or UDP is indicated by isnsDdPortalMemberPortType." REFERENCE "RFC 4171, Section 6" ::= { isnsDdPortalMemberEntry 5 }
isnsDdPortalMemberIsRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether this member of the DD is currently registered in the iSNS Server instance. Portals that are DD members do not need to be currently registered in order for them to be added to a DD." REFERENCE "RFC 4171, Section 6.11" ::= { isnsDdPortalMemberEntry 6 }
-- -- DD FC Port Membership Assignment --
isnsDdFcPortMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsDdFcPortMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing FC Port World Wide Names (WWN) that have been assigned to specific DDs. The number of rows in the table is dependent on the number of relationships between FC Ports and DDs registered in the iSNS." ::= { isnsDdInfo 4 }
isnsDdFcPortMemberEntry OBJECT-TYPE SYNTAX IsnsDdFcPortMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The association of one FC Port with a Discovery Domain. Membership of an FC Port in a Discovery Domain is indicated by creating a row for the appropriate DD ID and FC Port WWN." INDEX { isnsServerIndex, isnsDdId, isnsDdFcPortMemberPortName } ::= { isnsDdFcPortMemberTable 1 }
isnsDdFcPortMemberPortName OBJECT-TYPE SYNTAX FcNameIdOrZero (SIZE(8)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port WWN of the FC Port that is a member of the DD. The value MUST be a valid FC WWN, as per the FC-GS (Fibre Channel - Generic Services) standard. This managed object, combined with the isnsServerIndex and isnsDdId are the key for this table. A zero-length string is not a valid value for this managed object." REFERENCE "RFC 4171, Section 6" ::= { isnsDdFcPortMemberEntry 1 }
isnsDdFcPortMemberIsRegistered OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether this member of the DD is currently registered in the iSNS Server instance." REFERENCE "RFC 4171, Section 6.11" ::= { isnsDdFcPortMemberEntry 2 }
isnsRegEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegEntityEntry MAX-ACCESS not-accessible STATUS current
Gibbons, et al. Standards Track [Page 40]
RFC 4939 iSNS MIB July 2007
DESCRIPTION "A table containing registered Entity objects in each iSNS server instance. The number of entries in the table is dependent on the number of Entity objects registered in the iSNS Server instances. All Entity objects are registered in the iSNS using the iSNS protocol." ::= { isnsRegEntityInfo 1 }
isnsRegEntityEntry OBJECT-TYPE SYNTAX IsnsRegEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one registered Entity object in an iSNS server instance." INDEX { isnsServerIndex, isnsRegEntityIndex } ::= { isnsRegEntityTable 1 }
isnsRegEntityIndex OBJECT-TYPE SYNTAX IsnsEntityIndexIdOrZero ( 1 .. 4294967295 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Entity Index for this entity. This index is assigned by the iSNS Server when an Entity is initially registered. The Entity Index can be used to represent a registered Entity object in situations where the Entity EID would be too long/unwieldy. Zero is not a valid value for this object." REFERENCE "RFC 4171, Section 6"
Gibbons, et al. Standards Track [Page 41]
RFC 4939 iSNS MIB July 2007
::= { isnsRegEntityEntry 1 }
isnsRegEntityEID OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The EID is a unique registered Entity object identifier, as specified in the iSNS Specification. This is the iSNS Entity Identifier for the registered Entity object." REFERENCE "RFC 4171, Section 6" ::= { isnsRegEntityEntry 2 }
isnsRegEntityProtocol OBJECT-TYPE SYNTAX Unsigned32 ( 1 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The block storage protocol supported by this entity, as defined in the iSNS Specification, Section 6.2.2. The following values are initially assigned.
Type Value Entity Type ---------- ----------- 1 No Protocol 2 iSCSI 3 iFCP All Others As assigned by IANA
The full set of current Block Storage Protocols are specified in the IANA-maintained registry of assigned iSNS parameters. Please refer to RFC 4171 and the iSNS parameters maintained at IANA." REFERENCE "RFC 4171, Section 6.2.2, and IANA Assignments" ::= { isnsRegEntityEntry 3 }
isnsRegEntityManagementAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet address in isnsRegEntityManagementAddress. If the address is specified, then it must be a valid unicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsRegEntityManagementAddress is the zero-length string." ::= { isnsRegEntityEntry 4 }
Gibbons, et al. Standards Track [Page 42]
RFC 4939 iSNS MIB July 2007
isnsRegEntityManagementAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The iSNS Management IP Address for the registered Entity object. The format of this object is specified by isnsRegEntityManagementAddressType." REFERENCE "RFC 4171, Section 6" ::= { isnsRegEntityEntry 5 }
isnsRegEntityTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The iSNS Entity Registration Timestamp for the registered Entity object. This is the most recent date and time that the registered Entity object, and associated registered objects contained in the Entity, were registered or updated." REFERENCE "RFC 4171, Section 6" ::= { isnsRegEntityEntry 6 }
isnsRegEntityVersionMin OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 254 | 255 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum version supported for the block storage protocol specified by isnsRegEntityProtocol. The protocol version specified can be from 1 to 254. A value of 255 is a wildcard value, indicating no minimum version value has been specified for this Entity. Entity registrations with an isnsRegEntityProtocol of 'No Protocol' SHALL have an isnsRegEntityVersionMin value of 0." REFERENCE "RFC 4171, Section 6.2.5" ::= { isnsRegEntityEntry 7 }
isnsRegEntityVersionMax OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 254 | 255 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum version supported for the block storage protocol specified by isnsRegEntityProtocol. The protocol version specified can be from 1 to 254. A value of 255 is a wildcard
Gibbons, et al. Standards Track [Page 43]
RFC 4939 iSNS MIB July 2007
value, indicating no maximum version value has been specified for this Entity. Entity registrations with an isnsRegEntityProtocol of 'No Protocol' SHALL have an isnsRegEntityVersionMax value of 0." REFERENCE "RFC 4171, Section 6.2.5" ::= { isnsRegEntityEntry 8 }
isnsRegEntityRegistrationPeriod OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 4294967295 ) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The iSNS Entity Status Inquiry (ESI) registration period, which indicates the maximum time, in seconds, that the registration will be maintained without receipt of an iSNSP message from the entity. If the Registration Period is set to 0, then the Entity SHALL NOT be deregistered due to no contact with the entity." REFERENCE "RFC 4171, Section 6" ::= { isnsRegEntityEntry 9 }
-- -- Registered Objects Associated With an Entity Information --
isnsRegEntityNumObjectsTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegEntityNumObjectsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information on the number of registered objects associated with a registered Entity in the iSNS server instance. The number of entries in the table is dependent on the number of registered Entity objects in the iSNS." ::= { isnsRegEntityInfo 2 }
isnsRegEntityNumObjectsEntry OBJECT-TYPE SYNTAX IsnsRegEntityNumObjectsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on the number of registered objects associated with a registered Entity object in an iSNS Server instance." INDEX { isnsServerIndex, isnsRegEntityIndex }
isnsRegEntityInfoNumPortals OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Portals associated with this Entity." ::= { isnsRegEntityNumObjectsEntry 1 }
isnsRegEntityInfoNumPortalGroups OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Portal Groups associated with this Entity." ::= { isnsRegEntityNumObjectsEntry 2 }
isnsRegEntityInfoNumIscsiNodes OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of iSCSI Storage Nodes associated with this Entity." ::= { isnsRegEntityNumObjectsEntry 3 }
isnsRegEntityInfoNumFcPorts OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FC Ports associated with this Entity." ::= { isnsRegEntityNumObjectsEntry 4 }
isnsRegEntityInfoNumFcNodes OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current
Gibbons, et al. Standards Track [Page 45]
RFC 4939 iSNS MIB July 2007
DESCRIPTION "The number of FC Nodes associated with this Entity." ::= { isnsRegEntityNumObjectsEntry 5 }
isnsRegPortalTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegPortalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the registered Portals in the iSNS. The number of entries is dependent on the number of Portals registered in the iSNS." ::= { isnsRegPortalInfo 1 }
isnsRegPortalEntry OBJECT-TYPE SYNTAX IsnsRegPortalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one registered Entity Portal in the iSNS. The Entity Index is part of the table index to quickly find Portals that support a specific Entity." INDEX { isnsServerIndex, isnsRegEntityIndex, isnsRegPortalPortalIndex } ::= { isnsRegPortalTable 1 }
isnsRegPortalPortalIndex OBJECT-TYPE SYNTAX IsnsPortalIndexId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for this Entity Portal." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 1 }
isnsRegPortalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet address in isnsRegPortalAddress. If the address is specified, then it must be a valid unicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsRegPortalAddress is the zero-length string." ::= { isnsRegPortalEntry 2 }
isnsRegPortalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Inet Address for this Portal as defined in the iSNS Specification, RFC 4171. The format of this object is specified by isnsRegPortalAddressType." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 3 }
isnsRegPortalPortType OBJECT-TYPE SYNTAX IsnsPortalPortTypeId MAX-ACCESS read-only STATUS current DESCRIPTION "The port type for this Portal, either UDP or TCP, as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 4 }
Gibbons, et al. Standards Track [Page 47]
RFC 4939 iSNS MIB July 2007
isnsRegPortalPort OBJECT-TYPE SYNTAX InetPortNumber ( 1 .. 65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number for this Portal as defined in the iSNS Specification, RFC 4171. Whether the Portal type is TCP or UDP is indicated by isnsRegPortalPortType." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 5 }
isnsRegPortalSymbolicName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Symbolic Name for this Portal as defined in the iSNS Specification, RFC 4171. If not provided, then the string SHALL be zero-length." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 6 }
isnsRegPortalEsiInterval OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 65535 ) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The Entity Status Inquiry (ESI) Interval for this Portal as defined in the iSNS Specification, RFC 4171. A value of 0 indicates that ESI monitoring has not been configured for this Portal." REFERENCE "RFC 4171, Section 6.3.4" ::= { isnsRegPortalEntry 7 }
isnsRegPortalEsiPortType OBJECT-TYPE SYNTAX IsnsPortalPortTypeId MAX-ACCESS read-only STATUS current DESCRIPTION "The port type for the ESI Port, either UDP or TCP, as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 8 }
MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP or UDP port number used for ESI monitoring. Whether the port type is TCP or UDP is indicated by isnsRegPortalEsiPortType. A value of 0 indicates that ESI monitoring is not enabled for this Portal." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 9 }
isnsRegPortalScnPortType OBJECT-TYPE SYNTAX IsnsPortalPortTypeId MAX-ACCESS read-only STATUS current DESCRIPTION "The port type for the SCN Port, either UDP or TCP, as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 10 }
isnsRegPortalScnPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP or UDP port used to receive SCN messages from the iSNS Server. Whether the port type is TCP or UDP is indicated by isnsRegPortalScnPortType. A value of 0 indicates that SCN message receipt is not enabled for this Portal." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPortalEntry 11 }
isnsRegPortalSecurityInfo OBJECT-TYPE SYNTAX IsnsPortalSecurityType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates security attribute settings for the Portal as registered in the iSNS server. The bit for bitmapVALID must be set in order for this attribute to contain valid information. Setting a bit to 1 indicates the feature is enabled." REFERENCE "RFC 4171, Section 6.3.9" ::= { isnsRegPortalEntry 12 }
isnsRegPgTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegPgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the registered Portal Groups (PGs) in the iSNS Server instance. The number of entries is dependent on the number of Portal Groups registered in the iSNS." ::= { isnsRegPortalGroupInfo 1 }
isnsRegPgEntry OBJECT-TYPE SYNTAX IsnsRegPgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one registered Portal Group in the iSNS server instance. The Entity Index is part of the table index to quickly find Portal Groups that support Portals and iSCSI Storage Nodes in a specific Entity." INDEX { isnsServerIndex, isnsRegEntityIndex, isnsRegPgIndex } ::= { isnsRegPgTable 1 }
isnsRegPgIndex OBJECT-TYPE SYNTAX IsnsPortalGroupIndexId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PG Index for this node. The index is created by the iSNS Server instance for uniquely identifying registered objects. The PG object is registered at the same time a Portal or Storage Node is registered using the iSNS protocol." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPgEntry 1 }
isnsRegPgIscsiNodeIndex OBJECT-TYPE SYNTAX IsnsNodeIndexId MAX-ACCESS read-only STATUS current DESCRIPTION "The index for the iSCSI Node associated with this PG. This index can be used to reference the isnsRegIscsiNodeTable." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPgEntry 2 }
isnsRegPgIscsiName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..223)) MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI Name of the initiator or target associated with the storage node. The iSCSI Name cannot be longer than 223 bytes. The iSNS Server internal maximum size is 224 bytes to provide NULL termination. This is the PG iSCSI Name that uniquely identifies the iSCSI Storage Node that is associated with this PG." ::= { isnsRegPgEntry 3 }
isnsRegPgPortalPortalIndex OBJECT-TYPE SYNTAX IsnsPortalIndexId MAX-ACCESS read-only STATUS current DESCRIPTION "The Portal Index for the Portal associated with this PG. This index can be used to reference the isnsRegPortalTable." ::= { isnsRegPgEntry 4 }
isnsRegPgPortalAddressType OBJECT-TYPE
Gibbons, et al. Standards Track [Page 51]
RFC 4939 iSNS MIB July 2007
SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet address in isnsRegPgPortalAddress. If the address is specified, then it must be a valid unicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsRegPgPortalAddress is the zero-length string." ::= { isnsRegPgEntry 5 }
isnsRegPgPortalAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Inet Address for the Portal that is associated with the PG. The format of this object is specified by isnsRegPgPortalAddressType." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPgEntry 6 }
isnsRegPgPortalPortType OBJECT-TYPE SYNTAX IsnsPortalPortTypeId MAX-ACCESS read-only STATUS current DESCRIPTION "The port type, either UDP or TCP, for the Portal that is associated with this registered PG object." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPgEntry 7 }
isnsRegPgPortalPort OBJECT-TYPE SYNTAX InetPortNumber ( 1 .. 65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number for the Portal that is associated with this registered PG object. Whether the Portal type is TCP or UDP is indicated by isnsRegPgPortalPortType." REFERENCE "RFC 4171, Section 6" ::= { isnsRegPgEntry 8 }
isnsRegPgPGT OBJECT-TYPE SYNTAX IsnsPortalGroupTagIdOrNull MAX-ACCESS read-only STATUS current
Gibbons, et al. Standards Track [Page 52]
RFC 4939 iSNS MIB July 2007
DESCRIPTION "The Portal Group Tag (PGT) for the registered iSCSI Portal Group object in an iSNS Server instance. This indicates the tag value that the Portal uses for access to the iSCSI Storage Node. The PGT is used for coordinated access between multiple Portals, as described in the iSCSI Specification, RFC 3720. A PGT with no association is a NULL value. The value of -1 indicates a NULL value." REFERENCE "RFC 4171, Section 6, and RFC 3720" ::= { isnsRegPgEntry 9 }
isnsRegIscsiNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegIscsiNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the registered iSCSI Nodes in the iSNS server instance. Storage devices register using the iSNS protocol. While a device cannot be registered in an iSNS server using SNMP, an entry can be deleted in order to remove 'stale' entries. The number of entries is related to the number of iSCSI nodes registered in the iSNS." ::= { isnsRegIscsiNodeInfo 1 }
isnsRegIscsiNodeEntry OBJECT-TYPE SYNTAX IsnsRegIscsiNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one iSCSI node that has been registered in the iSNS Server instance. New rows cannot be added using SNMP." INDEX { isnsServerIndex, isnsRegEntityIndex, isnsRegIscsiNodeIndex } ::= { isnsRegIscsiNodeTable 1 }
isnsRegIscsiNodeIndex OBJECT-TYPE SYNTAX IsnsNodeIndexId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for this iSCSI node." REFERENCE "RFC 4171, Section 6" ::= { isnsRegIscsiNodeEntry 1 }
isnsRegIscsiNodeName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..223)) MAX-ACCESS read-only STATUS current DESCRIPTION "The iSCSI Name of the initiator or target associated with the storage node. The iSCSI Name cannot be longer than 223 bytes. The iSNS Server internal maximum size is 224 bytes to provide NULL termination. This is the iSCSI Name that uniquely identifies the initiator, initiator/target, target, or control node in the network." REFERENCE "RFC 4171, Section 6" ::= { isnsRegIscsiNodeEntry 2 }
isnsRegIscsiNodeType OBJECT-TYPE SYNTAX IsnsIscsiNodeType MAX-ACCESS read-only STATUS current DESCRIPTION "The Node Type defining the functions of this iSCSI node." ::= { isnsRegIscsiNodeEntry 3 }
isnsRegIscsiNodeAlias OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The Alias name of the iSCSI node. This is a variable-length text-based description of up to 255 bytes." REFERENCE "RFC 4171, Section 6"
Gibbons, et al. Standards Track [Page 54]
RFC 4939 iSNS MIB July 2007
::= { isnsRegIscsiNodeEntry 4 }
isnsRegIscsiNodeScnTypes OBJECT-TYPE SYNTAX IsnsIscsiScnType MAX-ACCESS read-only STATUS current DESCRIPTION "The State Change Notification (SCN) types enabled for this iSCSI node." REFERENCE "RFC 4171, Section 6.4.4" ::= { isnsRegIscsiNodeEntry 5 }
isnsRegIscsiNodeWwnToken OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This contains a globally unique 64-bit integer value that can be used to represent the World Wide Node Name of the iSCSI device in a Fibre Channel fabric. This identifier is used during the device registration process, and MUST conform to the requirements in RFC 4171. A zero-length string for this managed object indicates that a Node WWN token has not been assigned." REFERENCE "RFC 4171, Section 6" ::= { isnsRegIscsiNodeEntry 6 }
isnsRegIscsiNodeAuthMethod OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute contains a null-terminated string containing UTF-8 text listing the iSCSI authentication methods enabled for this iSCSI Node, in order of preference. The text values used to identify iSCSI authentication methods are embedded in this string attribute and delineated by a comma. The text values are identical to those found in RFC 3720 - iSCSI. Additional vendor-specific text values are also possible." REFERENCE "RFC 4171, Section 6, and RFC 3720" ::= { isnsRegIscsiNodeEntry 7 }
isnsRegFcNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegFcNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the registered FC Nodes in the iSNS. This supports iFCP as defined in RFC 4172." ::= { isnsRegFcNodeInfo 1 }
isnsRegFcNodeEntry OBJECT-TYPE SYNTAX IsnsRegFcNodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one registered FC node that has been registered in the iSNS." INDEX { isnsServerIndex, isnsRegFcNodeWwnn } ::= { isnsRegFcNodeTable 1 }
isnsRegFcNodeWwnn OBJECT-TYPE SYNTAX FcNameIdOrZero (SIZE(8)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FC Node World Wide Node Name as defined in the iSNS Specification, RFC 4171. A zero-length string is not valid for this managed object." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcNodeEntry 1 }
MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Node Symbolic Name of the node as defined in the iSNS Specification, RFC 4171. This is a variable-length text-based description. If not provided, then the string SHALL be zero-length." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcNodeEntry 2 }
isnsRegFcNodeAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet address in isnsRegFcNodeAddress. If the address is specified, then it must be a valid unicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsRegFcNodeAddress is the zero-length string." ::= { isnsRegFcNodeEntry 3 }
isnsRegFcNodeAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Node Inet address of the node as defined in the iSNS Specification, RFC 4171. The format of this object is specified by isnsRegFcNodeAddressType." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcNodeEntry 4 }
isnsRegFcNodeIPA OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "This managed object identifies the FC Initial Process Associator of the node as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcNodeEntry 5 }
STATUS current DESCRIPTION "The iSCSI Name used to represent the FC Node in the IP network. It is used as a pointer to the matching iSCSI Name entry in the iSNS Server. Its value is usually registered by an FC-iSCSI gateway connecting the IP network to the fabric containing the FC device." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcNodeEntry 6 }
isnsRegFcNodeNumFcPorts OBJECT-TYPE SYNTAX Gauge32 ( 0 .. 4294967295 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FC Ports associated with this FC Node." ::= { isnsRegFcNodeEntry 7 }
-- -- iSNS Registered FC Port Table --
isnsRegFcPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegFcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on registered FC N_Ports in the iSNS. FC Ports are associated with registered FC Nodes. This supports iFCP as defined in RFC 4172." REFERENCE "RFC 4172, Section 4" ::= { isnsRegFcNodeInfo 2 }
isnsRegFcPortEntry OBJECT-TYPE SYNTAX IsnsRegFcPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one FC Port that has been registered in iSNS." REFERENCE "RFC 4172, Section 4" INDEX { isnsServerIndex, isnsRegEntityIndex, isnsRegFcPortWwpn } ::= { isnsRegFcPortTable 1 }
isnsRegFcPortWwpn OBJECT-TYPE SYNTAX FcNameIdOrZero (SIZE(8)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FC Port's World Wide Port Name as defined in the iSNS Specification, RFC 4171. A zero-length string is not valid for this managed object." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 1 }
isnsRegFcPortID OBJECT-TYPE SYNTAX FcAddressIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port's Port ID as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 2 }
isnsRegFcPortType OBJECT-TYPE SYNTAX Unsigned32 ( 0 .. 65535 ) MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port Type as defined in the iSNS Specification, RFC 4171, and the Fibre Channel Generic Services Specification. Current values are as shown below: unknown (0), nPort (1),
Gibbons, et al. Standards Track [Page 59]
RFC 4939 iSNS MIB July 2007
nlPort (2), fNlPort (3), fPort (129), -- x'81' flPort (130), -- x'82' ePort (132), -- x'84' bPort (133), -- x'85' mFcpPort (65297), -- x'FF11' iFcpPort (65298), -- x'FF12' unknownEnd (65535) The future assignment of any additional values will be documented in a revision of RFC 4171." REFERENCE "RFC 4171, Section 6.6.3" ::= { isnsRegFcPortEntry 3 }
isnsRegFcPortSymbolicName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port Symbolic Name as defined in the iSNS Specification, RFC 4171. If not provided, then the string SHALL be zero-length." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 4 }
isnsRegFcPortFabricPortWwn OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Fabric Port WWN for this entry as defined in the iSNS Specification, RFC 4171. A zero-length string for this managed object indicates that the Fabric Port WWN is not known, or has not yet been registered with the iSNS Server." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 5 }
isnsRegFcPortHA OBJECT-TYPE SYNTAX FcAddressIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port Hard Address as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 6 }
isnsRegFcPortAddressType OBJECT-TYPE
Gibbons, et al. Standards Track [Page 60]
RFC 4939 iSNS MIB July 2007
SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Inet address in isnsRegFcPortAddress. If the address is specified, then it must be a valid unicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsRegFcPortAddress is the zero-length string." ::= { isnsRegFcPortEntry 7 }
isnsRegFcPortAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port Inet Address as defined in the iSNS Specification, RFC 4171. The format of this object is specified by isnsRegFcPortAddressType." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 8 }
isnsRegFcPortFcCos OBJECT-TYPE SYNTAX IsnsFcClassOfServiceType MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port Class of Service as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 9 }
isnsRegFcPortFc4Types OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port FC-4 Types as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6.6.9" ::= { isnsRegFcPortEntry 10 }
isnsRegFcPortFc4Descr OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(4..255)) MAX-ACCESS read-only STATUS current DESCRIPTION
Gibbons, et al. Standards Track [Page 61]
RFC 4939 iSNS MIB July 2007
"The FC Port FC-4 Descriptor as defined in the iSNS Specification, RFC 4171. The FC-4 Descriptor cannot be longer than 255 bytes. The iSNS Server internal maximum size is 256 bytes to provide NULL termination." REFERENCE "RFC 4171, Section 6.6.10" ::= { isnsRegFcPortEntry 11 }
isnsRegFcPortFc4Features OBJECT-TYPE SYNTAX OCTET STRING (SIZE (128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port FC-4 Features as defined in the iSNS Specification, RFC 4171." REFERENCE "RFC 4171, Section 6.6.11" ::= { isnsRegFcPortEntry 12 }
isnsRegFcPortScnTypes OBJECT-TYPE SYNTAX IsnsIfcpScnType MAX-ACCESS read-only STATUS current DESCRIPTION "The iFCP State Change Notification (SCN) types enabled for the registered object." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 13 }
isnsRegFcPortRole OBJECT-TYPE SYNTAX IsnsFcPortRoleType MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Port Role defines the role of the registered object." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 14 }
isnsRegFcPortFcNodeWwnn OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The FC Node World Wide Node Name that is associated with this FC Port as defined in the iSNS Specification, RFC 4171. This managed object may contain a zero-length string prior to a device registering this value with the iSNS Server." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 15 }
Gibbons, et al. Standards Track [Page 62]
RFC 4939 iSNS MIB July 2007
isnsRegFcPortPpnWwn OBJECT-TYPE SYNTAX FcNameIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Permanent Port Name (PPN) attribute is the FC Port Name WWPN of the first Storage Node registered in the iSNS Database that is associated with a particular FC Device (FC Node). The PPN of all subsequent Storage Node registrations that are associated with that FC Device (FC Node) SHALL be set to the FC Port Name WWPN of the first Storage Node, as defined in the iSNS Specification, RFC 4171. This managed object may contain a zero-length string prior to a device registering this value with the iSNS Server." REFERENCE "RFC 4171, Section 6" ::= { isnsRegFcPortEntry 16 }
-- -- Mapping from FC Node to Entity - FC Port --
isnsRegFcNodePortTable OBJECT-TYPE SYNTAX SEQUENCE OF IsnsRegFcNodePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the mapping of a registered FC Node and associated registered iFCP Port to the supporting registered Entity object in an iSNS Server instance." ::= { isnsRegFcNodeInfo 3 }
isnsRegFcNodePortEntry OBJECT-TYPE SYNTAX IsnsRegFcNodePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on one mapping from an FC Node and iFCP Port to an Entity object registered in an iSNS." INDEX { isnsServerIndex, isnsRegFcNodeWwnn, isnsRegFcPortWwpn } ::= { isnsRegFcNodePortTable 1 }
isnsRegFcNodePortEntityIndex OBJECT-TYPE SYNTAX IsnsEntityIndexIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The Entity Index for the registered Entity object associated with the FC Port and FC Node. This managed object may contain the value of zero prior to a device registering this value with the iSNS Server." ::= { isnsRegFcNodePortEntry 1 }
-- -- iSNS Notifications Information ----------------- --
isnsInstanceInfo OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Textual information about the notification event and the iSNS Server generating the notification. An example is: iSNS Server Started." ::= { isnsNotificationsInfo 1 }
isnsAddressNotificationType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of Inet address in isnsAddressNotification. If the address is specified, then it must be a valid unicast address and the value of this object must be ipv4(1), ipv6(2), ipv4z(3), or ipv6z(4); otherwise, the value of this object is unknown(0), and the value of isnsAddressNotification is the zero-length string." ::= { isnsNotificationsInfo 2 }
isnsAddressNotification OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Identifies the IP address of the iSNS Server. The format of
Gibbons, et al. Standards Track [Page 64]
RFC 4939 iSNS MIB July 2007
this object is specified by isnsAddressNotificationType. The IP address will always be specified in the notification unless an error causes the IP address to not be known." ::= { isnsNotificationsInfo 3 }
isnsTcpPortNotification OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the TCP port the iSNS Server is using, or 0 if TCP-based registrations are not supported." ::= { isnsNotificationsInfo 4 }
isnsUdpPortNotification OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the UDP port the iSNS Server is using, or 0 if UDP-based registrations are not supported." ::= { isnsNotificationsInfo 5 }
isnsServerStart NOTIFICATION-TYPE OBJECTS { isnsInstanceInfo, isnsAddressNotificationType, isnsAddressNotification, isnsTcpPortNotification, isnsUdpPortNotification } STATUS current DESCRIPTION "This notification is sent when an iSNS Server begins operation. The notification provides the following: isnsInstanceInfo : iSNS Server textual information isnsAddressTypeNotification : iSNS Server address type isnsAddressNotification : iSNS Server address isnsTcpPortNotification : iSNS Server TCP Port isnsUdpPortNotification : iSNS Server UDP Port " ::= { isnsNotifications 1 }
isnsServerShutdown NOTIFICATION-TYPE
Gibbons, et al. Standards Track [Page 65]
RFC 4939 iSNS MIB July 2007
OBJECTS { isnsInstanceInfo, isnsAddressNotificationType, isnsAddressNotification, isnsTcpPortNotification, isnsUdpPortNotification } STATUS current DESCRIPTION "This notification is sent when an iSNS Server is shutdown. The notification provides the following: isnsInstanceInfo : iSNS Server textual information isnsAddressTypeNotification : iSNS Server address type isnsAddressNotification : iSNS Server address isnsTcpPortNotification : iSNS Server TCP Port isnsUdpPortNotification : iSNS Server UDP Port " ::= { isnsNotifications 2 }
------------------------------------------------------------ -- -- Compliance Information --
isnsIscsiServerCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Initial compliance statement for an iSNS Server providing support to iSCSI clients." MODULE -- this module MANDATORY-GROUPS { isnsServerAttributesGroup, isnsServerIscsiControlNodeGroup, isnsServerIscsiDdsDdObjGroup, isnsServerRegIscsiObjGroup, isnsServerNumObjectsGroup, isnsNotificationsObjGroup, isnsServerNotificationGroup } OBJECT isnsServerDiscoveryMcGroupType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z is required."
Gibbons, et al. Standards Track [Page 66]
RFC 4939 iSNS MIB July 2007
OBJECT isnsServerDiscoveryMcGroupAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z and their related SIZE need to be supported."
OBJECT isnsDdPortalMemberAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z is required."
OBJECT isnsDdPortalMemberAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z and their related SIZE need to be supported."
OBJECT isnsRegEntityManagementAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z is required."
OBJECT isnsRegEntityManagementAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z and their related SIZE need to be supported."
OBJECT isnsRegPortalAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z is required."
OBJECT isnsRegPortalAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z and their related SIZE need to be supported."
DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z is required."
OBJECT isnsRegPgPortalAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z and their related SIZE need to be supported."
OBJECT isnsAddressNotificationType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, ipv6z is required."
OBJECT isnsAddressNotification SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z and their related SIZE need to be supported." ::= { isnsCompliances 1 }
isnsIfcpServerCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "Initial compliance statement for an iSNS Server providing support to iFCP Clients." MODULE -- this module MANDATORY-GROUPS { isnsServerAttributesGroup, isnsServerIfcpPortControlNodeGroup, isnsServerIfcpDdsDdObjGroup, isnsServerRegIfcpObjGroup, isnsServerNumObjectsGroup, isnsNotificationsObjGroup, isnsServerNotificationGroup } OBJECT isnsServerDiscoveryMcGroupType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z is required."
DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z, and their related SIZE need to be supported."
OBJECT isnsDdPortalMemberAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z is required."
OBJECT isnsDdPortalMemberAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z, and their related SIZE need to be supported."
OBJECT isnsRegEntityManagementAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z is required."
OBJECT isnsRegEntityManagementAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z, and their related SIZE need to be supported."
OBJECT isnsRegPortalAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z is required."
OBJECT isnsRegPortalAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z, and their related SIZE need to be supported."
OBJECT isnsRegFcNodeAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z
Gibbons, et al. Standards Track [Page 69]
RFC 4939 iSNS MIB July 2007
is required."
OBJECT isnsRegFcNodeAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z, and their related SIZE need to be supported."
OBJECT isnsRegFcPortAddressType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z is required."
OBJECT isnsRegFcPortAddress SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z, and their related SIZE need to be supported."
OBJECT isnsAddressNotificationType SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4) } DESCRIPTION "Only support for unknown, ipv4, ipv6, ipv4z, and ipv6z is required."
OBJECT isnsAddressNotification SYNTAX InetAddress (SIZE (0 | 4 | 8 | 16 | 20 )) DESCRIPTION "Only addresses for unknown, ipv4, ipv6, ipv4z, ipv6z, and their related SIZE need to be supported." ::= { isnsCompliances 2 }
isnsServerDiscoveryMcGroupType, isnsServerDiscoveryMcGroupAddress, isnsServerEsiNonResponseThreshold, isnsServerEnableControlNodeMgtScn, isnsServerDefaultDdDdsStatus, isnsServerUpdateDdDdsSupported, isnsServerUpdateDdDdsEnabled } STATUS current DESCRIPTION "iSNS Server attributes." ::= { isnsGroups 1 }
isnsServerNumObjectsGroup OBJECT-GROUP OBJECTS { isnsNumDds, isnsNumDd, isnsNumEntities, isnsNumPortals, isnsNumPortalGroups, isnsNumIscsiNodes, isnsNumFcPorts, isnsNumFcNodes, isnsRegEntityInfoNumPortals, isnsRegEntityInfoNumPortalGroups, isnsRegEntityInfoNumIscsiNodes, isnsRegEntityInfoNumFcPorts, isnsRegEntityInfoNumFcNodes } STATUS current DESCRIPTION "Managed objects indicating the number of registered objects in an iSNS Server or the number of registered objects associated with a registered Entity. These managed objects are optional to implement." ::= { isnsGroups 2 }
isnsServerIscsiControlNodeGroup OBJECT-GROUP OBJECTS { isnsControlNodeIscsiNodeName, isnsControlNodeIscsiIsRegistered, isnsControlNodeIscsiRcvMgtSCN } STATUS current DESCRIPTION "iSNS Server iSCSI control node managed objects." ::= { isnsGroups 3 }
Gibbons, et al. Standards Track [Page 71]
RFC 4939 iSNS MIB July 2007
isnsServerIfcpPortControlNodeGroup OBJECT-GROUP OBJECTS { isnsControlNodeFcPortIsRegistered, isnsControlNodeFcPortRcvMgtSCN } STATUS current DESCRIPTION "iSNS Server iFCP Port control node managed objects." ::= { isnsGroups 4 }
isnsServerIscsiDdsDdObjGroup OBJECT-GROUP OBJECTS { isnsDdsSymbolicName, isnsDdsStatus, isnsDdsMemberSymbolicName, isnsDdSymbolicName, isnsDdFeatures, isnsDdIscsiMemberName, isnsDdIscsiMemberIsRegistered, isnsDdPortalMemberAddressType, isnsDdPortalMemberAddress, isnsDdPortalMemberPortType, isnsDdPortalMemberPort, isnsDdPortalMemberIsRegistered } STATUS current DESCRIPTION "iSNS Server DDS and DD managed objects for iSCSI." ::= { isnsGroups 5 }
isnsServerIfcpDdsDdObjGroup OBJECT-GROUP OBJECTS { isnsDdsSymbolicName, isnsDdsStatus, isnsDdSymbolicName, isnsDdFeatures, isnsDdPortalMemberAddressType, isnsDdPortalMemberAddress, isnsDdPortalMemberPortType, isnsDdPortalMemberPort, isnsDdPortalMemberIsRegistered, isnsDdFcPortMemberIsRegistered } STATUS current DESCRIPTION "iSNS Server DDS and DD managed objects for iFCP." ::= { isnsGroups 6 }
There are no management objects defined in this MIB module that have a MAX-ACCESS clause of read-write and/or read-create. So, if this MIB module is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB module via direct SNMP SET operations.
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
The isnsDdsMemberTable contains information about which Discovery Domains may be enabled at the same time.
The isnsDdTable contains information about Discovery Domains, containing storage nodes with an ability to communicate and exchange storage data.
The isnsDdIscsiMemberTable indicates which iSCSI nodes are contained in which Discovery Domains.
The isnsDdPortalMemberTable indicates which iSCSI portals are contained in which Discovery Domains.
The isnsDdFcPortMemberTable indicates which iFCP FC N_Ports are contained in which Discovery Domains.
The isnsControlNodeIscsiTable indicates which iSCSI nodes have the ability to possibly control an iSNS server.
The isnsControlNodeFcPortTable indicates which iFCP FC N_Ports have the ability to possibly control an iSNS server.
The above object tables provide information about storage objects sessions, and can indicate to a user who is communicating and exchanging storage data.
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
Gibbons, et al. Standards Track [Page 76]
RFC 4939 iSNS MIB July 2007
It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case J., Rose, M., and S. Waldbusser, "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M., and S. Waldbusser, "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose, M., and S. Waldbusser, "Conformance Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, December 2002.
[RFC3720] Satran, J., Meth, K., Sapuntzakis, C., Chadalapaka, M., and E. Zeidner, "Internet Small Computer Systems Interface (iSCSI)", RFC 3720, March 2004.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J. Schoenwaelder, "Textual Conventions for Internet Network Addresses", RFC 4001, February 2005.
[RFC4044] McCloghrie, K., "Fibre Channel Management MIB", RFC 4044, May 2005.
Gibbons, et al. Standards Track [Page 77]
RFC 4939 iSNS MIB July 2007
[RFC4133] McCloghrie, K. and A. Bierman, "Entity MIB (Version 3)", RFC 4133, August 2005.
[RFC4171] Tseng, J., Gibbons, K., Travostino, F., Du Laney, C., and J. Souza, "Internet Storage Name Service (iSNS)", RFC 4171, September 2005.
[RFC4172] Monia, C., Mullendore, R., Travostino, F., Jeong, W., and M. Edwards, "iFCP - A Protocol for Internet Fibre Channel Storage Networking", RFC 4172, September 2005.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, "Introduction and Applicability Statements for Internet- Standard Management Framework", RFC 3410, December 2002.
This memo is a product of the IP Storage (IPS) working group within the Internet Engineering Task Force.
We wish to acknowledge the contributions and comments from the IPS WG, including the following:
IPS WG Chair: David Black Former Editors: Josh Tseng and Tom McSweeney MIB Editors: Keith McCloghrie and Bert Wijnen
Gibbons, et al. Standards Track [Page 78]
RFC 4939 iSNS MIB July 2007
Authors' Addresses
Kevin Gibbons 2Wire, Inc. 1704 Automation Parkway San Jose, CA 95131 USA Tel: +1 408-895-1387 Fax: +1 408-428-9590 EMail: kgibbons@yahoo.com
G.D. Ramkumar SnapTell, Inc. 2741 Middlefield Rd, Suite 200 Palo Alto, CA 94306 USA Tel: +1 650-326-7627 Fax: +1 650-326-7620 EMail: gramkumar@stanfordalumni.org
Scott Kipp Brocade 4 McDATA Pkwy Broomfield, CO 80021 USA Tel: +1 720-558-3452 Fax: +1 720-558-8999 EMail: skipp@brocade.com
Gibbons, et al. Standards Track [Page 79]
RFC 4939 iSNS MIB July 2007
Full Copyright Statement
Copyright (C) The IETF Trust (2007).
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the Internet Society.