This document is obsolete. Please
refer to RFC 5175.
Network Working Group B. Haberman, Ed. Request for Comments: 5075 JHU APL Category: Standards Track R. Hinden Nokia November 2007
IPv6 Router Advertisement Flags Option
Status of This Memo
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Abstract
The IPv6 Neighbor Discovery's Router Advertisement message contains an 8-bit field reserved for single-bit flags. Several protocols have reserved flags in this field and others are preparing to reserve a sufficient number of flags to exhaust the field. This document defines an option to the Router Advertisement message that expands the available number of flag bits available.
The IPv6 Neighbor Discovery Protocol's (NDP) [RFC4861] Router Advertisement message contains an 8-bit field reserved for single-bit flags. Several protocols have reserved flags in this field and others are preparing to reserve a sufficient number of flags to exhaust the field.
This document defines an option for the Router Advertisement message that expands the available number of flag bits by adding an additional 48 flag bits to NDP messages.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
With other protocols in the works (e.g., Detecting Network Attachment) that want to use flags in the NDP messages, it is necessary to define an expansion capability to support new features.
The Neighbor Discovery specification [RFC4861] contains the capability to define NDP options. The following (Figure 2) is the definition of the Expanded Flags Option (EFO) for NDP Router Advertisement messages.
o Length - The length MUST be checked when processing the option in order to allow for future expansion of this option. An implementation of this specification MUST set the Length to 1, MUST ignore any unrecognized data, and MUST be able to recognize the specific length in order to skip over unrecognized bits.
o Bits - allocated by IANA
The definition and usage of these bits is to be found in the document requesting their allocation.
During the construction/transmission, this option:
o MUST only occur in Router Advertisement messages.
o MUST occur prior to any additional options associated with any flags set in this option.
o MUST only occur once in the Router Advertisement message.
o MUST NOT be added to a Router Advertisement message if no flags in the option are set.
o MUST set all unused flags to zero.
Haberman & Hinden Standards Track [Page 3]
RFC 5075 IPv6 RA Flags Options November 2007
Upon reception, a receiver processing NDP messages containing this option:
o MUST ignore the option if it occurs in a message other than a Router Advertisement.
o MUST ignore all instances of the option except the first one encountered in the Router Advertisement message.
o MUST ignore the option if the Length is less than 1.
o MUST ignore any unknown flag bits.
The bit fields within the option are numbered from left to right, from 8 to 55 (starting as bit offset 16 in the option) and follow the numbering of the flag bits in the RA option described in Figure 1. Flag bits 0 to 7 are found in the Router Advertisement message header defined in [RFC4861].
IANA has created a new registry for IPv6 ND Router Advertisement flags. This should include the current flags in the RA option and in the extension option defined in this document. The new registry has been added to the icmpv6-parameters as shown above. The format for the registry is:
Haberman & Hinden Standards Track [Page 4]
RFC 5075 IPv6 RA Flags Options November 2007
+---------------+---------------------------------------+-----------+ | RA Option Bit | Description | Reference | +---------------+---------------------------------------+-----------+ | 0 | M - Managed Address Configuration | [RFC4861] | | | Flag | | | 1 | O - Other Configuration Flag | [RFC4861] | | 2 | H - Mobile IPv6 Home Agent Flag | [RFC3775] | | 3 | Prf - Router Selection Preferences | [RFC4191] | | 4 | Prf - Router Selection Preferences | [RFC4191] | | 5 | P - Neighbor Discovery Proxy Flag | [RFC4389] | | 6-53 | R - Reserved; Available for | | | | assignment | | | 54-55 | Private Experimentation | | +---------------+---------------------------------------+-----------+
The assignment of new RA flags in the RA option header and the bits defined in the RA extension option defined in this document require standards action or IESG approval [RFC2434].
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.