RFC 5728






Internet Engineering Task Force (IETF)                         S. Combes
Request for Comments: 5728                                   P. Amundsen
Category: Informational                                       M. Lambert
ISSN: 2070-1721                                                 H. Lexow
                                                           SatLabs Group
                                                              March 2010


                     The SatLabs Group DVB-RCS MIB

Abstract



   This document describes the MIB module for the Digital Video
   Broadcasting Return Channel via Satellite system (DVB-RCS), as
   defined by the SatLabs Group.  It defines a set of MIB objects to
   characterize the behavior and performance of network-layer entities
   deploying DVB-RCS.

Status of This Memo



   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents
   approved by the IESG are a candidate for any level of Internet
   Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc5728.

Copyright Notice



   Copyright (c) 2010 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.



Combes, et al.                Informational                     [Page 1]

RFC 5728                       DVB-RCS MIB                    March 2010


   This document may not be modified, and derivative works of it may not
   be created, except to format it for publication as an RFC or to
   translate it into languages other than English.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Table of Contents



   1. Introduction ....................................................4
   2. Conventions Used in This Document ...............................5
      2.1. Abbreviations ..............................................6
      2.2. Glossary ...................................................8
           2.2.1. Star DVB-RCS Network ................................8
           2.2.2. Mesh DVB-RCS Network ................................8
           2.2.3. Transparent DVB-RCS Network .........................8
           2.2.4. Regenerative DVB-RCS Network ........................8
           2.2.5. DVB-RCS MAC Layer ...................................9
           2.2.6. DVB-RCS TDM .........................................9
           2.2.7. DVB-RCS TDMA ........................................9
           2.2.8. IDU .................................................9
           2.2.9. ODU .................................................9
           2.2.10. RCST ...............................................9
           2.2.11. NCC ................................................9
           2.2.12. Configuration File ................................10
           2.2.13. Log File ..........................................10
           2.2.14. Installation Log File .............................10
           2.2.15. Antenna Alignment .................................10
           2.2.16. CW Frequency ......................................10
           2.2.17. Request Class .....................................10
           2.2.18. Channel ID ........................................10
           2.2.19. ATM Profile .......................................10
           2.2.20. MPEG Profile ......................................11
           2.2.21. PID Pool ..........................................11
           2.2.22. Capacity Categories ...............................11
           2.2.23. Start Transponder .................................12
           2.2.24. DVB-S .............................................12
           2.2.25. DVB-S2 and CCM/VCM/ACM ............................12
           2.2.26. Interactive Network ...............................13



Combes, et al.                Informational                     [Page 2]

RFC 5728                       DVB-RCS MIB                    March 2010


   3. MIB Module Overview ............................................13
      3.1. Textual Conventions .......................................13
      3.2. Structure of the MIB ......................................14
      3.3. Relationship to the Interfaces MIB Module .................15
      3.4. MIB Groups Description ....................................18
           3.4.1. dvbRcsRcstSystem ...................................18
           3.4.2. dvbRcsRcstNetwork ..................................19
           3.4.3. dvbRcsRcstInstall ..................................19
           3.4.4. dvbRcsRcstQos ......................................19
           3.4.5. dvbRcsRcstControl ..................................20
           3.4.6. dvbRcsRcstState ....................................20
           3.4.7. dvbRcsFwdLink (dvbRcsFwdConfig and
                  dvbRcsFwdStatus groups) ............................20
           3.4.8. dvbRcsRtnLink (dvbRcsRtnConfig and
                  dvbRcsRtnStatus groups) ............................20
   4. Definitions ....................................................21
   5. Security Considerations ........................................91
   6. IANA Considerations ............................................92
   7. Acknowledgments ................................................92
   8. References .....................................................93
      8.1. Normative References ......................................93
      8.2. Informative References ....................................94





























Combes, et al.                Informational                     [Page 3]

RFC 5728                       DVB-RCS MIB                    March 2010


1.  Introduction



   The SatLabs Group [SATLABS] is an international non-profit EEIG
   (European Economic Interest Grouping) committed to large-scale
   adoption and deployment of the Digital Video Broadcasting Return
   Channel via Satellite (DVB-RCS) standard [ETSI-RCS].  SatLabs members
   are service providers, satellite operators, system integrators,
   terminal manufacturers, and technology providers with an interest in
   DVB-RCS.

   Since its creation in 2001, the main goal of the SatLabs Group has
   been to achieve interoperability between DVB-RCS terminals and
   systems.  Therefore, the Group has defined the SatLabs Qualification
   Program, which provides an independent certification process for DVB-
   RCS terminals based on System Recommendations defined by SatLabs.  To
   enhance product interoperability, beyond the physical-layer and MAC-
   layer mechanisms defined in the DVB-RCS standard, SatLabs has
   expanded its Recommendations in the field of DVB-RCS terminal
   management [SATLABS].  As part of this effort, SatLabs has specified
   a common Simple Network Management Protocol (SNMP) Management
   Information Base (MIB) for DVB-RCS terminals, which is defined in
   this document.

   A DVB-RCS terminal is denoted as a Return Channel Satellite Terminal
   (RCST) in the remainder of this document.  This consists of an Indoor
   Unit (IDU) and an Outdoor Unit (ODU) connected through an Inter-
   Facility Link (IFL), usually a coaxial L-band interface.  On the user
   side, the IDU is connected to the user network through a Local Area
   Network (LAN) interface (usually Ethernet).  On the network side, the
   ODU is connected via a satellite link (the air interface).

   The SatLabs Group DVB-RCS MIB is implemented in the IDU of an RCST.
   RCST management can be performed either through the LAN interface
   (local management) or through the air interface (remote management
   from the Network Control Center, NCC).  RCST and NCC elements are
   shown on Figure 1.















Combes, et al.                Informational                     [Page 4]

RFC 5728                       DVB-RCS MIB                    March 2010


                 +------------+
                 |  IP        |
                 |  End Host  |
                 +-----+------+
                       |
        - - - - - - - -|- - - - - - - - - - - - - - - -
        |              | LAN interface                 |
                       |
        |       +------+--------+                      |
                | Indoor Unit   |
        |       |  (IDU)        |                      |
                +------+--------+
        |              |                               |
             Inter Facility Link (IFL)
        |              |                               |
                +-----+---------+
        |       | Outdoor Unit  |                      |
                | (ODU)         |
        |       +------+--------+                      |
                       |
        |              | Air interface                 |
        - - - - - - -  |- - - - - - - - - - - - - - - -
          RCST         |
                       |        +----------------+
                       +------->| Network Control|
                                | Center (NCC)   |
                                +----------------+

                  Figure 1: RCST Architecture

2.  Conventions Used in This Document



   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].




Combes, et al.                Informational                     [Page 5]

RFC 5728                       DVB-RCS MIB                    March 2010


   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in BCP 14, RFC 2119
   [RFC2119].

2.1.  Abbreviations



   AAL5   ATM Adaptation Layer Type 5

   ACM    Adaptive Coding and Modulation

   ATM    Asynchronous Transfer Mode

   AVBDC  Absolute Volume-Based Dynamic Capacity

   BER    Bit Error Rate

   BUC    Block Up-Converter

   CCM    Constant Coding and Modulation

   CNR    Carrier to Noise Ratio

   CRA    Continuous Rate Assignment

   CSC    Common Signaling Channel

   CW     Continuous Wave (carrier frequency)

   dBi    deciBel (isotropic)

   dBm    deciBel (with respect to 1 mW)

   DC     Direct Current

   DSCP   Diffserv Code Point

   DVB    Digital Video Broadcasting

   EIRP   Equivalent Isotropic Radiated Power

   ETSI   European Telecommunications Standards Institute

   FEC    Forward Error Correction

   FTP    File Transfer Protocol

   GS     Generic Stream



Combes, et al.                Informational                     [Page 6]

RFC 5728                       DVB-RCS MIB                    March 2010


   GSE    Generic Stream Encapsulation

   IDU    Indoor Unit

   IFL    Inter-Facility Link

   LNB    Low Noise Block

   LO     Local Oscillator

   MAC    Medium Access Control

   MIB    Management Information Base

   MPEG   Motion Pictures Expert Group

   MPE    Multi-Protocol Encapsulation

   NCC    Network Control Centre

   OAM    Operations and Management

   ODU    Outdoor Unit

   PHB    Per-Hop Behavior

   PEP    Performance Enhancing Proxy

   PID    Packet IDentifier (MPEG, used as Elementary Stream Identifier)

   QoS    Quality of Service

   RBDC   Rate-Based Dynamic Capacity

   RC     Request Class

   RCS    Return Channel via Satellite

   RCST   Return Channel via Satellite Terminal (DVB-RCS Terminal)

   Rx     Receive

   SDU    Service Data Unit

   SSPA   Solid State Power Amplifier

   TDM    Time-Division Multiplex




Combes, et al.                Informational                     [Page 7]

RFC 5728                       DVB-RCS MIB                    March 2010


   TDMA   Time-Division Multiple Access

   TFTP   Trivial File Transfer Protocol

   TS     Transport Stream (as defined by MPEG)

   Tx     Transmit

   VBDC   Volume-Based Dynamic Capacity

   VCI    Virtual Channel Identifier (ATM)

   VPI    Virtual Path Identifier (ATM)

   Vpp    Volts peak-to-peak

2.2.  Glossary



   The terms in this document are derived either from DVB-RCS standard
   specifications [ETSI-RCS] or from SatLabs System Recommendations
   [SATLABS].

2.2.1.  Star DVB-RCS Network



   This denotes a hub-and-spoke configuration where all communications
   pass through a central hub, which usually also includes the NCC.
   Peer-to-peer communication between RCSTs is possible through a double
   satellite hop (this traffic has to pass through the hub).

2.2.2.  Mesh DVB-RCS Network



   This denotes a mesh configuration that supports peer-to-peer
   communications in a single satellite hop directly between RCSTs.

2.2.3.  Transparent DVB-RCS Network



   This denotes a network using transparent satellite transponders.
   Star or mesh network configurations can be supported.  In the case of
   a mesh configuration, RCSTs need to incorporate a TDMA receiver in
   addition to the TDM receiver.

2.2.4.  Regenerative DVB-RCS Network



   This denotes a network that uses regenerative satellite transponders,
   i.e.  includes some On-Board Processing functionality, which allows
   demodulation and decoding of the uplink TDMA signals and re-multiplex
   of the traffic into TDM signals on the downlink.  Star or mesh
   network configurations can be supported.



Combes, et al.                Informational                     [Page 8]

RFC 5728                       DVB-RCS MIB                    March 2010


2.2.5.  DVB-RCS MAC Layer



   The DVB-RCS MAC layer represents the air interface of an RCST, as
   specified in [ETSI-RCS].  The interface is bi-directional and
   supports IP traffic over hub-spoke (star) and mesh satellite network
   topologies.

2.2.6.  DVB-RCS TDM



   The DVB-RCS TDM corresponds to the forward link of a DVB-RCS
   transparent system or the downlink of a DVB-RCS regenerative system.
   It is based on either the DVB-S or DVB-S2 standard, specified in
   [ETSI-DVBS] and [ETSI-DVBS2] respectively.  In the DVB-RCS context,
   this interface is uni- or bi-directional, as it may also be used for
   a return channel dedicated to a single terminal.

2.2.7.  DVB-RCS TDMA



   The DVB-RCS TDMA corresponds to the return or mesh link of an RCS
   transparent system or the uplink of an RCS regenerative system.  It
   is specified in [ETSI-RCS].

   In the context of star transparent and mesh regenerative DVB-RCS
   systems, this interface is uni-directional.

   In the context of mesh transparent DVB-RCS systems, this interface is
   bi-directional.

2.2.8.  IDU



   This is the indoor part of the RCST (including at least the power
   supply, and usually also the modem and networking functions).

2.2.9.  ODU



   This is the outdoor part of the RCST (including at least the aerial,
   and usually also the LNB and BUC).

2.2.10.  RCST



   This is the Satellite Terminal, installed on the customer premises.
   It is composed of the IDU and ODU.

2.2.11.  NCC



   The NCC provides Control and Monitoring Functions.  It generates
   control and timing signals for the operation of the DVB-RCS Network.




Combes, et al.                Informational                     [Page 9]

RFC 5728                       DVB-RCS MIB                    March 2010


2.2.12.  Configuration File



   The configuration file is an XML-formatted file, storing
   configuration parameters for the RCST and their values.

2.2.13.  Log File



   The log file is stored at the RCST.  This is used to log particular
   events that occur on the RCST side.

2.2.14.  Installation Log File



   The installation log file is stored at the RCST.  This logs
   particular events that occur on the RCST side and are related to RCST
   installation phase.

2.2.15.  Antenna Alignment



   This is the process to align the RCST antenna, part of the ODU, in
   order to enable bi-directional communication (uplink, downlink) with
   the satellite network.

2.2.16.  CW Frequency



   The CW frequency is the frequency of a Continuous Wave signal.  It is
   a narrowband carrier transmitted for the duration of measurements
   during the installation of an RCST.

2.2.17.  Request Class



   A Request Class (RC) is a representation of a Per-Hop Behavior (PHB)
   at the MAC layer.  It defines a behavior of the MAC layer for a given
   aggregation of traffic.  This behavior includes a combination of
   Capacity Categories associated to the RC and a priority with respect
   to the other RCs supported by an RCST.

2.2.18.  Channel ID



   Each Request Class is identified by a unique Channel_ID in the
   communication between the RCST and the NCC.

2.2.19.  ATM Profile



   The ATM profile is one of the two profiles for traffic burst format
   on a DVB-RCS TDMA.  It is based on one or more concatenated ATM
   cells, each of length 53 bytes, plus an optional prefix.





Combes, et al.                Informational                    [Page 10]

RFC 5728                       DVB-RCS MIB                    March 2010


2.2.20.  MPEG Profile



   The MPEG profile is one of the two profiles for traffic burst format
   on the DVB-RCS TDMA.  It is based on a number of concatenated
   MPEG2-TS packets, each of length 188 bytes.

2.2.21.  PID Pool



   For the MPEG profile, several RCs may be mapped within a pool of
   several PIDs to allow cross-RC Section Packing [ETSI-DAT].  Section
   Packing can be used on all PIDs and higher priority traffic can
   always preempt lower priority streams.  This reduces the need for
   padding.

2.2.22.  Capacity Categories



   The TDMA timeslot allocation process for the DVB-RCS uplink supports
   several Capacity Categories.

   The Capacity Categories CRA, RBDC, and A/VBDC, when authorized for an
   RC, have to be configured from the NCC.  Their configuration
   parameters are used to inform the RCST of the configuration of each
   category at the NCC side and thus help in Capacity Requests
   computation.

   The categories are treated independently for each RC.  A SatLabs
   optional feature is defined that allows their configuration at the
   RCST level in addition to configuration per RC.  This feature is
   denoted RCST_PARA.

2.2.22.1.  Continuous Rate Assignment (CRA)



   CRA is a rate capacity that is provided in full in a continuous
   manner to the RCST while required.

2.2.22.2.  Rate-Based Dynamic Capacity (RBDC)



   RBDC is a rate capacity that is requested dynamically by an RCST.
   RBDC is provided in response to explicit requests from the RCST to
   the NCC, such requests being absolute (i.e., corresponding to the
   full rate currently being requested).  Each request overrides all
   previous RBDC requests from the same RCST and is subject to a maximum
   rate limit.








Combes, et al.                Informational                    [Page 11]

RFC 5728                       DVB-RCS MIB                    March 2010


2.2.22.3.  Volume-Based Dynamic Capacity (VBDC)



   VBDC is a volume capacity that is requested dynamically by an RCST.
   VBDC is provided in response to explicit requests from the RCST to
   the NCC, such requests being cumulative (i.e., each request adds to
   all previous requests from the same RCST).

2.2.22.4.  Absolute Volume-Based Dynamic Capacity (AVBDC)



   AVBDC is a volume capacity that is requested dynamically by an RCST.
   This capacity is provided in response to explicit requests from the
   RCST to the NCC, such requests being absolute (i.e., this request
   replaces the previous ones from the same RCST).

   The combination of AVBDC and VBDC is seen as a single Capacity
   Category, denoted A/VBDC.

2.2.22.5.  Population ID



   This defines a group of RCSTs within a network.

2.2.23.  Start Transponder



   This is the satellite transponder on which the communication is
   initiated from an RCST point of view when in the installation mode.
   The parameters corresponding to this transponder (satellite orbital
   position, frequency, etc.) are stored at the RCST as power-up
   configuration data.

2.2.24.  DVB-S



   DVB-S is the Digital Video Broadcast over Satellite [ETSI-DVBS].  It
   is a framework and set of associated standards published by ETSI for
   the transmission of video, audio, and data, using the ISO MPEG-2
   standard [ISO-MPEG], over satellite links.

2.2.25.  DVB-S2 and CCM/VCM/ACM



   DVB-S2 is the Second Generation of the Digital Video Broadcast for
   Satellite applications standard [ETSI-DVBS2].  It is a framework and
   set of associated standards published by ETSI for the transmission of
   video, audio, and data.

   BBFRAME: The main framing unit of the DVB-S2 protocol stack.

   CCM: In CCM transmission mode, the forward link uses a constant set
        of transmission parameters (FEC coding rate and modulation
        scheme) for all receivers.



Combes, et al.                Informational                    [Page 12]

RFC 5728                       DVB-RCS MIB                    March 2010


   VCM: In VCM transmission mode, the forward link uses transmission
        parameters that are variable on a BBFRAME-by-BBFRAME but fixed
        on a Receiver basis, according to fixed link and propagation
        conditions for each Receiver.

   ACM: In ACM transmission mode, the forward link uses transmission
        parameters that are dynamically adjusted on a BBFRAME-by-BBFRAME
        and Receiver-per-Receiver basis, according to actual link and
        propagation conditions.  In order to implement ACM, feedback
        from each Receiver has to be provided by DVB-RCS return channel.

2.2.26.  Interactive Network



   This is another name for a DVB-RCS-based satellite network.

3.  MIB Module Overview



   This MIB module provides a set of objects required for the management
   of a SatLabs-compliant RCST.  The specification is derived from the
   parameters and protocols described in [SATLABS].

   The MIB module in this document uses the following OBJECT IDENTIFIER
   values, as already assigned by IANA under the smi-numbers registry
   [IANA]:

         +------------+---------------------------+
         | Descriptor | OBJECT IDENTIFIER value   |
         +------------+---------------------------+
         |dvbRcsMib   |{ mib-2 transmission 239 } |
         +------------+---------------------------+

           Table 1: Object Identifiers for the MIB

   These values have been assigned for this MIB under the
   'mib-2.transmission' subtree.

3.1.  Textual Conventions



   This MIB module defines new textual conventions for RCST indications
   of SatLabs-defined capabilities, including profiles, options, and
   optional features.

   DvbRcsSystemSatLabsProfileMap represents the SatLabs profiles
   supported as defined in [SATLABS].

   DvbRcsSystemSatLabsOptionMap represents the SatLabs options supported
   as defined in [SATLABS].  These are options that are used for the
   certification of SatLabs terminals.  They represent important



Combes, et al.                Informational                    [Page 13]

RFC 5728                       DVB-RCS MIB                    March 2010


   functionality, with impact on interoperability, and their support is
   advertised with the RCST certification level.

   DvbRcsSystemSatLabsFeatureMap represents the SatLabs optional
   features supported as defined in [SATLABS].  These represent minor
   features, not necessary for interoperability.  They are not used for
   the certification of SatLabs terminals.

3.2.  Structure of the MIB



   This MIB module is structured into two top-level groups:

   o  The dvbRcsMibObjects group includes all the managed objects of the
      DVB-RCS MIB.

   o  The dvbRcsConformance group includes the compliance statements for
      DVB-RCS terminals that are compliant with [SATLABS].  The managed
      objects are grouped into formal object groups (i.e., units of
      conformance) according to their relation to specific SatLabs
      options or features.  The conformance statements (MODULE-
      COMPLIANCE specification) are described within the
      dvbRcsRcstCompliances group, while the units of conformance are
      described within the dvbRcsRcstGroups group.

   The dvbRcsMibObjects group is further structured into three groups:
   dvbRcsRcst, dvbRcsFwdLink, and dvbRcsRtnLink.

   The dvbRcsRcst group covers management related to the RCST equipment.
   It is structured into six groups:

   o  dvbRcsRcstSystem

   o  dvbRcsRcstNetwork

   o  dvbRcsRcstInstall

   o  dvbRcsRcstQos

   o  dvbRcsRcstControl

   o  dvbRcsRcstState

   The dvbRcsFwdLink group covers management information related to the
   RCST forward link.  It is structured into two groups:

   o  dvbRcsFwdConfig

   o  dvbRcsFwdStatus



Combes, et al.                Informational                    [Page 14]

RFC 5728                       DVB-RCS MIB                    March 2010


   The dvbRcsRtnLink group covers management information related to the
   RCST return link.  It is structured into two groups:

   o  dvbRcsRtnConfig

   o  dvbRcsRtnStatus

   Tables within each of these groups cover different functions like
   return link traffic management (packet classes, Request Classes, PID
   pools) and forward link configuration and status.

   Rows created automatically (e.g., by the device according to the
   hardware configuration) may, and generally will, have a mixture of
   configuration and status objects within them.  Rows that are meant to
   be created by the management station are generally restricted to
   configuration (read-create) objects.

3.3.  Relationship to the Interfaces MIB Module



   This section clarifies the relationship of this MIB module to the
   Interfaces MIB [RFC2863].  Several areas of correlation are addressed
   in the following.  The implementer is referred to the Interfaces MIB
   document in order to understand the general intent of these areas.

   IANA has assigned three ifType labels for DVB-RCS.  Each RCST MUST
   support at least the three following interfaces:

   o  dvbRcsMacLayer (239), -- DVB-RCS MAC Layer

      DVB-RCS MAC Layer represents the complete air interface of an
      RCST, as specified in [ETSI-RCS].  This interface supports star
      and mesh networks and is bi-directional.  Only star networks are
      considered by the present MIB module.

   o  dvbTdm (240), -- DVB Satellite TDM

      DVB-RCS physical link based on Time-Division Multiplexing.  It
      corresponds to the forward link of an RCS transparent system or
      the downlink of an RCS regenerative system.  It is based on either
      the DVB-S or DVB-S2 standard, specified in [ETSI-DVBS] and
      [ETSI-DVBS2] respectively.  Only transparent systems are
      considered by the present MIB module.

      In the DVB-RCS context, this interface is uni- or bi-directional.

      In the present MIB module, only a uni-directional (i.e., forward
      link, or downstream) dvbTdm interface is considered.




Combes, et al.                Informational                    [Page 15]

RFC 5728                       DVB-RCS MIB                    March 2010


   o  dvbRcsTdma (241), -- DVB-RCS TDMA

      DVB-RCS physical link based on Time-Division Multiple Access.  It
      corresponds to the return or mesh link of an RCS transparent
      system or the uplink of an RCS regenerative system.  It is based
      on the DVB-RCS standard specified in [ETSI-RCS].

      In the context of star transparent and mesh regenerative DVB-RCS
      systems, this interface is uni-directional.

      In the context of mesh transparent DVB-RCS systems, this interface
      is bi-directional.

      Only star transparent systems are considered by the present MIB
      module (i.e., return link, or upstream).

   The protocol stack (as reflected in ifStackTable) will be as follows:

           +--------------------------+
           |            IP            |
           +--------------------------+
           |      dvbRcsMacLayer      |
           +---------------+----------+
           |  dvbRcsTdma   | dvbTdm   |
           +---------------+----------+
           |   MPEG/ATM    | MPEG/GS  |
           +---------------+----------+

           Figure 2: RCST Protocol Stack

   An additional Ethernet interface is used on the LAN side of the RCST
   (see Figure 1).

   An instance of ifEntry exists for each dvbTdm interface, for each
   dvbRcsTdma (normally only one), and for each dvbRcsMac layer
   (normally only one).

   The interface counters relate to:

   o  dvbRcsMacLayer: DVB-RCS two-way MAC interface that counts
      aggregate Multi-Protocol Encapsulation (MPE) frames, Generic
      Stream Encapsulation (GSE) encapsulated PDUs (equals IP packets),
      and ATM Adaptation Layer 5 (AAL5) frames.

   MPE is specified in [ETSI-DAT] and is transported over MPEG, which is
   specified in [ISO-MPEG].  MPEG is transported over GS or TS
   (Transport Stream) carriers.  The TS carrier is specified in
   [ETSI-DVBS] for DVB-S and [ETSI-DVBS2] for DVB-S2.



Combes, et al.                Informational                    [Page 16]

RFC 5728                       DVB-RCS MIB                    March 2010


   GSE is specified in [ETSI-GSE] and is transported over the GS
   (Generic Stream) carrier, which is specified in [ETSI-DVBS2].

   ATM is specified in [ITU-ATM].

   AAL5 is specified in [ITU-AAL5].

   o  dvbTdm: The DVB-RCS TDM interface that counts MPEG TS packets at
      stream level, if the TS format is used.  If the Generic Stream
      (GS) format is used, it counts GSE packets.

   o  dvbRcsTdma: The DVB-RCS TDMA interface that counts aggregate ATM
      and MPEG TS packets.

   The ifStackTable [RFC2863] MUST be implemented to identify the
   relationships among sub-interfaces.

   The following example is a DVB-RCS star network with DVB-S and DVB-
   RCS.  As illustrated on Figure 3, it shows a DVB-RCS MAC interface
   with one downstream and one upstream interface.  In this network, ATM
   encapsulation is used in the DVB-RCS uplink.  Two ATM Logical Ports
   are shown.  DVB-S2 or DVB-S can be used in the downlink.

   ifType 214 'mpegTransport' can also be used for counting TS packets
   and bytes for sub-interfaces of dvbRcsTdma or dvbTdm, e.g., per PID-
   oriented or per TS-oriented, as desired and applicable.

       +----------------------------------------------------------+
       |                 IP Network Layer                         |
       +------+----------------------------------+----------------+
              |                                  |
       +------+-------+       +------------------+----------------+
       | Ethernet LAN |       |          dvbRcsMacLayer           |
       +--------------+       +-------------+---------------------+
                                            |                 |
                              +-------------+-----------+ +---+---+
                              |        dvbRcsTdma       | |dvbTdm |
                              +-----+-------------+-----+ +-------+
                                    |             |
                              +-----+-----+ +-----+-----+
                              |atm-logical| |atm-logical|
                              +-----------+ +-----------+

                     Figure 3: Example Stacking

   As can be seen from this example, the dvbRcsMacLayer interface is
   layered on top of the downstream and upstream interfaces, and the
   upstream interface is layered on top of upstream ATM logical links.



Combes, et al.                Informational                    [Page 17]

RFC 5728                       DVB-RCS MIB                    March 2010


   In this example, the assignment of index values could be as follows:

     ifIndex           ifType                     Description
    ----------------------------------------------------------------
        2        dvbRcsMacLayer (239)        DVB-RCS MAC Layer
        3        dvbRcsTdma (241)            DVB-RCS TDMA Upstream
        4        dvbTdm(240)                 DVB-RCS TDM Downstream
        5        atm-logical(80)             ATM Logical Port
        6        atm-logical(80)             ATM Logical Port

   The corresponding ifStack entries would then be:

        +--------------------+-------------------+
        | IfStackHigherLayer | ifStackLowerLayer |
        +--------------------+-------------------+
        |         0          |         1         |
        |         0          |         2         |
        |         1          |         0         |
        |         2          |         3         |
        |         2          |         4         |
        |         3          |         5         |
        |         3          |         6         |
        |         4          |         0         |
        |         5          |         0         |
        |         6          |         0         |
        +--------------------+-------------------+

             Table 2: Example ifStack Entries

3.4.  MIB Groups Description



3.4.1.  dvbRcsRcstSystem



   The MIB objects in this group gather some basic information that
   would allow anyone to trace the history -- the life -- of the RCST,
   as well as to get a complete description of its constitution on the
   component point of view, including the SatLabs options/features
   support statement.  Many of the parameters will be defined at
   installation.

   This group contains description parameters related to the RCST type
   (ODU type) and location.  These parameters are believed to stay
   unchanged once it has been defined during installation.  Modification
   of hardware equipment, maintenance operations, and geographical re-
   location may require an update of those MIB objects.  Note that the
   dvbRcsRcstSystem.dvbRcsSystemLocation object gives the location of





Combes, et al.                Informational                    [Page 18]

RFC 5728                       DVB-RCS MIB                    March 2010


   the ODU antenna, which is needed for network operation, while the
   system.sysLocation (MIB-II SNMP OID) provides the location of the IDU
   unit, which cannot be used for the same purpose.

   The RCST must provide either Read-Write access to dvbRcsSystemOdu
   parameters or, alternatively, provide the list of supported devices
   through the dvbRcsRcstOduListGroup (see conformance section).  This
   group of parameters, defined in the dvbRcsRcstSystem group, allows
   the selection by the RCST installer of the actual ODU type.  In such
   a case, the installer must set dvbRcsOduTxType, dvbRcsOduRxType, and
   dvbRcsOduAntennaType according to the selected BUC, LNB, and antenna
   respectively.

3.4.2.  dvbRcsRcstNetwork



   This group contains all the MIB objects related to network
   parameters.

   In this subgroup, two objects have been defined in order to
   differentiate between control and user traffic and associate them
   with a physical interface.  Both
   dvbRcsRcstNetwork.dvbRcsNetworkLanIpAddress (Traffic) and
   dvbRcsRcstNetwork.dvbRcsNetworkOamInetAddress (OAM) provide the value
   of the IP address of, respectively, the user traffic and the control
   and management traffic.

3.4.3.  dvbRcsRcstInstall



   This group contains all the information related to the RCST
   installation and commissioning.  Many parameters are believed to stay
   unchanged once it has been defined during installation.  Modification
   of hardware equipment, maintenance operations, and geographical re-
   location may require an update of those MIB objects.

3.4.4.  dvbRcsRcstQos



   This group contains objects to configure the Quality of Service (QoS)
   of the RCST by the NCC.

   The dvbRcsPktClass table defines the packet classification for IP
   layer 3 classifications.  Each dvbRcsPktClass entry is mapped to a
   dvbRcsPhbEntry in the dvbRcsPhbMappingTable.

   The dvbRcsPhbMappingTable makes the relation between a packet
   classification entry, a Per-Hop Behavior (PHB) identifier, and a
   Request Class entry.





Combes, et al.                Informational                    [Page 19]

RFC 5728                       DVB-RCS MIB                    March 2010


   The dvbRcsRequestClassTable defines all the layer 2 DVB-RCS QoS
   parameters.

3.4.5.  dvbRcsRcstControl



   This MIB group contains objects a network manager can use to invoke
   actions and tests supported by the RCST agent and to retrieve the
   action/test results.

3.4.6.  dvbRcsRcstState



   This MIB group describes the fault state, software versions, and
   configuration file versions of the RCST.

3.4.7.  dvbRcsFwdLink (dvbRcsFwdConfig and dvbRcsFwdStatus groups)



   This MIB group contains parameters that enable access to data about
   the forward link.

   Configuration information is kept in the
   dvbRcsFwdLink.dvbRcsFwdConfig subgroup.  Status information is kept
   into the dvbRcsFwdLink.dvbRcsFwdStatus subgroup.

   The information in dvbRcsFwdLink.dvbRcsFwdConfig.dvbRcsFwdStartTable
   is used for the first time the RCST tries to acquire the forward
   link.  All these object values are aligned with the Satellite
   Delivery System Descriptor in the Network Information Table (NIT)
   table [ETSI-SI].

   The objects in the dvbRcsFwdLink.dvbRcsFwdConfig.dvbRcsFwdStatusTable
   are aligned with the satellite forward path descriptor from the RCS
   Map Table (RMT) [ETSI-RCS] and with the Physical Layer (PL) Header
   [ETSI-DVBS2], which specifies the MODCOD (modulation and FEC rate)
   and the Type (frame length short or long and the presence/absence of
   pilots).

3.4.8.  dvbRcsRtnLink (dvbRcsRtnConfig and dvbRcsRtnStatus groups)



   This MIB group contains parameters that enable access to data about
   the return link.

   Configuration information is kept in the
   dvbRcsRtnLink.dvbRcsRtnConfig subgroup.  Status information is kept
   into the dvbRcsRtnLink.dvbRcsRtnStatus subgroup.

   The RCST is only able to deal with one return link at a time.  Hence,
   there is no need to define a table to collect the different SNMP
   objects, as it is done for the forward.



Combes, et al.                Informational                    [Page 20]

RFC 5728                       DVB-RCS MIB                    March 2010


4.  Definitions



   DVB-RCS-MIB DEFINITIONS ::= BEGIN

   IMPORTS
       MODULE-IDENTITY,
       OBJECT-TYPE,
       Integer32,
       Unsigned32,
       transmission
           FROM SNMPv2-SMI          -- [RFC2578]
       TEXTUAL-CONVENTION,
       RowStatus
           FROM SNMPv2-TC           -- [RFC2579]
       OBJECT-GROUP,
       MODULE-COMPLIANCE
           FROM SNMPv2-CONF         -- [RFC2580]
       SnmpAdminString
           FROM SNMP-FRAMEWORK-MIB  -- [RFC3411]
       InetAddressType,
       InetAddress,
       InetAddressPrefixLength,
       InetPortNumber
           FROM INET-ADDRESS-MIB    -- [RFC4001]
       Uri
           FROM URI-TC-MIB          -- [RFC5017]
       Dscp,
       DscpOrAny
           FROM DIFFSERV-DSCP-TC    -- [RFC3289]
       ;

   dvbRcsMib MODULE-IDENTITY
       LAST-UPDATED "201002161200Z"
       ORGANIZATION "The SatLabs Group"
       CONTACT-INFO
              "The SatLabs Group
               Web:    www.satlabs.org
               E-mail: info@satlabs.org"
       DESCRIPTION
           "DVB-RCS MIB subtree.

            This MIB module applies to equipment that is a Return
            Channel Satellite Terminal (RCST), defined in the Digital
            Video Broadcasting Return Channel via Satellite system
            (DVB-RCS) standard (ETSI EN 301 790 Digital Video
            Broadcasting (DVB); Interaction Channel for Satellite
            Distribution Systems, European Telecommunications
            Standards Institute (ETSI)).



Combes, et al.                Informational                    [Page 21]

RFC 5728                       DVB-RCS MIB                    March 2010


            It defines a set of MIB objects to characterize the
            behavior and performance of network-layer entities
            implementing DVB-RCS.
            This MIB module is intended to be used by DVB-RCS
            equipment following the SatLabs System Recommendations,
            defined by the SatLabs Group and available at
            www.satlabs.org.
            Note that, if not stated otherwise in the object
            DESCRIPTION clause, all writable objects are
            persistent.

            Copyright (C) The IETF Trust (2010).  This version of
            this MIB module is part of RFC 5728; see the RFC itself
            for full legal notices."
       REVISION "200907201200Z"
       DESCRIPTION
           "Revision of this MIB module, following MIB doctor review
           and adjustments based on the MIB authoring guidelines
           from the IETF."
           ::= { transmission 239 }

   --==============================================================
   -- Textual Conventions
   --==============================================================
   DvbRcsSatLabsProfileMap ::= TEXTUAL-CONVENTION
       STATUS current
       DESCRIPTION
           "This textual convention enumerates the declaration of
           the SatLabs-defined terminal profiles.  The mapping to
           the profiles is to be understood as described here.  (0)
           refers to the most significant bit.

            dvbs(0) -> DVBS profile (DVB-S support)
            dvbs2ccm(1) -> DVB-S2 CCM profile (CCM support)
            dvbs2acm(2) -> DVB-S2 ACM profile (CCM, VCM and ACM
            support)"
       REFERENCE
          "SatLabs System Recommendations, available at
          www.satlabs.org."
       SYNTAX BITS     {
               dvbs(0),
               dvbs2ccm(1),
               dvbs2acm(2),
               spare1(3),
               spare2(4),
               spare3(5),
               spare4(6),
               spare5(7),



Combes, et al.                Informational                    [Page 22]

RFC 5728                       DVB-RCS MIB                    March 2010


               spare6(8),
               spare7(9),
               spare8(10),
               spare9(11),
               spare10(12),
               spare11(13),
               spare12(14),
               spare13(15),
               spare14(16),
               spare15(17),
               spare16(18),
               spare17(19),
               spare18(20),
               spare19(21),
               spare20(22),
               spare21(23),
               spare22(24),
               spare23(25),
               spare24(26),
               spare25(27),
               spare26(28),
               spare27(29),
               spare28(30),
               spare29(31)
               }

   DvbRcsSatLabsOptionMap ::= TEXTUAL-CONVENTION
       STATUS current
       DESCRIPTION
           "This textual convention enumerates the declaration of
           the SatLabs-defined options.  A value of 1 indicates
           that the respective option is supported.  The mapping
           to the options is to be understood as described here.
           (0) refers to the most significant bit.

               mpegTrf(0) -> MPEG_TRF
               coarseSync(1) -> COARSE_SYNC
               wideHop(2) -> WIDE_HOPP
               fastHop(3) -> FAST_HOPP
               dynamicMfTdma(4) -> Dynamic_MF_TDMA
               contentionSync(5) -> CONTENTION_SYNC
               qpskLow(6) -> QPSKLOW
               mod16Apsk(7) -> 16APSK
               mod32Apsk(8) -> 32APSK
               normalFec(9) -> NORMALFEC
               multiTs(10) -> MULTITS
               gsTs(11) -> GSTS
               enhQoS(12) -> ENHQOS



Combes, et al.                Informational                    [Page 23]

RFC 5728                       DVB-RCS MIB                    March 2010


               pep(13) -> PEP
               http(14) -> HTTP
               ftp(15) -> FTP
               dns(16) -> DNS
               chIdStrict(17) -> CHID_STRICT
               nlid(18) -> NLID
               snmpMisc(19) -> SNMPMISC

           The support of specific options mandates the support of
           specific objects and access levels."
       REFERENCE
          "SatLabs System Recommendations, available at
          www.satlabs.org."
       SYNTAX BITS     {
               mpegTrf(0),
               coarseSync(1),
               wideHop(2),
               fastHop(3),
               dynamicMfTdma(4),
               contentionSync(5),
               qpskLow(6),
               mod16Apsk(7),
               mod32Apsk(8),
               normalFec(9),
               multiTs(10),
               gsTs(11),
               enhQoS(12),
               pep(13),
               http(14),
               ftp(15),
               dns(16),
               chIdStrict(17),
               nlid(18),
               snmpMisc(19),
               spare1(20),
               spare2(21),
               spare3(22),
               spare4(23),
               spare5(24),
               spare6(25),
               spare7(26),
               spare8(27),
               spare9(28),
               spare10(29),
               spare11(30),
               spare12(31)
               }




Combes, et al.                Informational                    [Page 24]

RFC 5728                       DVB-RCS MIB                    March 2010


   DvbRcsSatLabsFeatureMap ::= TEXTUAL-CONVENTION
          STATUS current
          DESCRIPTION
              "This textual convention enumerates the declaration
              of the SatLabs-specified compatibility and
              configuration features.  A value of 1 indicates that
              the respective feature is supported.  The mapping to
              the features is to be understood as described here.
              (0) refers to the most significant bit.

                  rcstPara(0) -> RCST_PARA feature
                  installLog(1) -> INSTALL_LOG feature
                  enhClassifier(2) -> ENHCLASSIFIER feature
                  routeId(3) -> ROUTE_ID feature
                  oduList(4) -> ODULIST feature
                  extNetwork(5) -> EXTNETWORK feature
                  extControl(6) -> EXTCONTROL feature
                  extConfig(7) -> EXTCONFIG feature
                  extStatus(8) -> EXTSTATUS feature
                  mpaf(9) -> MPAF feature

           The support of specific features mandates the support of
           specific objects and access levels."
          REFERENCE
             "SatLabs System Recommendations, available at
              www.satlabs.org."
          SYNTAX BITS     {
                  rcstPara(0),
                  installLog(1),
                  enhClassifier(2),
                  routeId(3),
                  oduList(4),
                  extNetwork(5),
                  extControl(6),
                  extConfig(7),
                  extStatus(8),
                  mpaf(9),
                  spare1(10),
                  spare2(11),
                  spare3(12),
                  spare4(13),
                  spare5(14),
                  spare6(15),
                  spare7(16),
                  spare8(17),
                  spare9(18),
                  spare10(19),
                  spare11(20),



Combes, et al.                Informational                    [Page 25]

RFC 5728                       DVB-RCS MIB                    March 2010


                  spare12(21),
                  spare13(22),
                  spare14(23),
                  spare15(24),
                  spare16(25),
                  spare17(26),
                  spare18(27),
                  spare19(28),
                  spare20(29),
                  spare21(30),
                  spare22(31)
                  }

   --==============================================================
   -- object type definitions
   --==============================================================
   dvbRcsMibObjects      OBJECT IDENTIFIER ::= {dvbRcsMib 1}
   dvbRcsConformance     OBJECT IDENTIFIER ::= {dvbRcsMib 2}

   dvbRcsRcst        OBJECT IDENTIFIER ::= {dvbRcsMibObjects 1}
   dvbRcsFwdLink     OBJECT IDENTIFIER ::= {dvbRcsMibObjects 2}
   dvbRcsRtnLink     OBJECT IDENTIFIER ::= {dvbRcsMibObjects 3}

   dvbRcsRcstSystem        OBJECT IDENTIFIER ::= {dvbRcsRcst 1}
   dvbRcsRcstNetwork       OBJECT IDENTIFIER ::= {dvbRcsRcst 2}
   dvbRcsRcstInstall       OBJECT IDENTIFIER ::= {dvbRcsRcst 3}
   dvbRcsRcstQos           OBJECT IDENTIFIER ::= {dvbRcsRcst 4}
   dvbRcsRcstControl       OBJECT IDENTIFIER ::= {dvbRcsRcst 5}
   dvbRcsRcstState         OBJECT IDENTIFIER ::= {dvbRcsRcst 6}

   dvbRcsFwdConfig         OBJECT IDENTIFIER ::= {dvbRcsFwdLink 1}
   dvbRcsFwdStatus         OBJECT IDENTIFIER ::= {dvbRcsFwdLink 2}

   dvbRcsRtnConfig         OBJECT IDENTIFIER ::= {dvbRcsRtnLink 1}
   dvbRcsRtnStatus         OBJECT IDENTIFIER ::= {dvbRcsRtnLink 2}

   --==============================================================
   --    dvbRcsRcstSystem sub-tree object types
   --==============================================================
   dvbRcsSystemMibRevision        OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "This object allows the SNMP agent to report the
           implemented MIB module revision.
           The supported REVISION of this module is reported."
   ::= {dvbRcsRcstSystem 1}



Combes, et al.                Informational                    [Page 26]

RFC 5728                       DVB-RCS MIB                    March 2010


   --==============================================================
   -- Options declared according to the textual conventions
   --==============================================================
   dvbRcsSystemSatLabsProfilesDeclaration OBJECT-TYPE
       SYNTAX        DvbRcsSatLabsProfileMap
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
           "Indicates the SatLabs profiles supported, as defined in
           the SatLabs System Recommendations."
   ::= {dvbRcsRcstSystem 2}

   dvbRcsSystemSatLabsOptionsDeclaration OBJECT-TYPE
       SYNTAX        DvbRcsSatLabsOptionMap
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
           "Indicates the SatLabs options supported, as defined in
           the SatLabs System Recommendations."
   ::= {dvbRcsRcstSystem 3}

   dvbRcsSystemSatLabsFeaturesDeclaration OBJECT-TYPE
       SYNTAX        DvbRcsSatLabsFeatureMap
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
           "Indicates the optional compatibility features and minor
            options supported, as defined in the SatLabs System
            Recommendations."
   ::= {dvbRcsRcstSystem 4}

   dvbRcsSystemLocation OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Physical location of the ODU antenna expressed as
            longitude, latitude, and altitude.  The string
            shall have 31 characters in the following format:
                <xxxx.xxx>,<a>,<yyyyy.yyy>,<b>,<zzzz.z>,M
            where x, y and z represents digits,
                a=N or S,
                b=E or W,
            Reading the digits from left to right:
                'x' 7 latitude digits;
                 x digits 1-2 contain the degrees,
                 x digits 3-7 contain the minutes in decimal;
                'y' 8 longitude digits;



Combes, et al.                Informational                    [Page 27]

RFC 5728                       DVB-RCS MIB                    March 2010


                 y digits 1-3 contain the degrees,
                 y digits 4-8 contain the minutes in decimal;
                'z' 5 altitude digits;
                    meters above sea level in decimal;
                '.' is the decimal point;
                ',' is the field separator;
                'M' is the indicator for altitude meters.
            This format is a modified subset of the NMEA 0183
            (National Marine Electronics Association, Interface
            Standard) format for Global Positioning System Fix
            Data.
            This location and the satellite position are used to
            calculate the RCST-satellite path delay.
            Note: The system.sysLocation object of MIB-II provides
            physical location of the IDU unit."
   ::= {dvbRcsRcstSystem 5}

   dvbRcsSystemOduAntennaSize OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "cm"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Diameter of the antenna."
   ::= {dvbRcsRcstSystem 6}

   dvbRcsSystemOduAntennaGain OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x0.1 dBi"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Antenna peak gain of the ODU."
   ::= {dvbRcsRcstSystem 7}

   dvbRcsSystemOduSspa OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x0.1 W"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Power level of the Solid State Power Amplifier
           installed in the ODU."
   ::= {dvbRcsRcstSystem 8}

   dvbRcsSystemOduTxType OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-write



Combes, et al.                Informational                    [Page 28]

RFC 5728                       DVB-RCS MIB                    March 2010


       STATUS              current
       DESCRIPTION
           "Type of transmitter installed in the ODU."
   ::= {dvbRcsRcstSystem 9}

   dvbRcsSystemOduRxType OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
            "Type of LNB installed in the ODU, with
            information such as vendor type, output type (single,
            twin, quad,...), etc."
   ::= {dvbRcsRcstSystem 10}

   dvbRcsSystemOduRxBand OBJECT-TYPE
       SYNTAX              INTEGER   {
                           oduHighRxBand (0),
                           oduLowRxBand  (1)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "LNB High Band / Low Band selector.  High Band corresponds
           to the emission of an 18-26 kHz tone with 0.4-0.8 Vpp in
           the Rx IFL cable:
           (0)    - High Band
           (1)    - Low Band"
   ::= {dvbRcsRcstSystem 11}

   dvbRcsSystemOduRxLO OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x100 Hz"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Frequency of LNB Local Oscillator (in 100 Hz)"
   ::= {dvbRcsRcstSystem 12}

   dvbRcsSystemOduTxLO OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x100 Hz"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Frequency of Block Up-Converter Local Oscillator
           (in 100 Hz)."
   ::= {dvbRcsRcstSystem 13}



Combes, et al.                Informational                    [Page 29]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsSystemIduPep OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 14}

   dvbRcsTcpPep OBJECT-TYPE
       SYNTAX             INTEGER{
                             disabled (0),
                             enabled (1)
                                 }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Status and control of embedded TCP PEP.
               0 - disabled or not implemented
               1 - enabled"
   ::={dvbRcsSystemIduPep 1}

   dvbRcsHttpPep  OBJECT-TYPE
       SYNTAX              INTEGER{
                              disabled (0),
                              enabled (1)
                                  }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Status and control of embedded HTTP PEP.
               0 - disabled or not implemented
               1 - enabled"
   ::={dvbRcsSystemIduPep 2}

   --==============================================================
   -- ODU structural entities
   --==============================================================

   dvbRcsOduTx         OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 15}
   dvbRcsOduRx         OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 16}
   dvbRcsOduAntenna    OBJECT IDENTIFIER ::= {dvbRcsRcstSystem 17}

   --==============================================================
   -- ODU BUC
   --==============================================================

   dvbRcsOduTxTypeTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF DvbRcsOduTxTypeEntry
       MAX-ACCESS not-accessible
       STATUS  current
       DESCRIPTION
           "This table contains the identification of each well-
           known BUC type supported by the IDU and provides its
           associated index."



Combes, et al.                Informational                    [Page 30]

RFC 5728                       DVB-RCS MIB                    March 2010


   ::={dvbRcsOduTx 1}

   dvbRcsOduTxTypeEntry OBJECT-TYPE
       SYNTAX            DvbRcsOduTxTypeEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the BUC type table."
          INDEX   { dvbRcsOduTxTypeIndex }
   ::={dvbRcsOduTxTypeTable 1}

   DvbRcsOduTxTypeEntry ::= SEQUENCE {
                     dvbRcsOduTxTypeIndex          Unsigned32,
                     dvbRcsOduTxTypeDescription    SnmpAdminString
                     }

   dvbRcsOduTxTypeIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..32)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index for the BUC type."
   ::={dvbRcsOduTxTypeEntry 1}

   dvbRcsOduTxTypeDescription OBJECT-TYPE
       SYNTAX     SnmpAdminString
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "Text-based identification of a BUC type."
   ::={dvbRcsOduTxTypeEntry 2}

   dvbRcsOduTxType OBJECT-TYPE
       SYNTAX              Unsigned32
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Index of the selected BUC type."
   ::={dvbRcsOduTx 2}

   --==============================================================
   -- ODU LNB
   --==============================================================

   dvbRcsOduRxTypeTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF DvbRcsOduRxTypeEntry
       MAX-ACCESS not-accessible
       STATUS  current



Combes, et al.                Informational                    [Page 31]

RFC 5728                       DVB-RCS MIB                    March 2010


       DESCRIPTION
           "This table contains the identification of each well-
           known LNB type supported by the IDU and provides its
           associated index."
   ::={dvbRcsOduRx 1}

   dvbRcsOduRxTypeEntry OBJECT-TYPE
       SYNTAX            DvbRcsOduRxTypeEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the LNB type table."
       INDEX   { dvbRcsOduRxTypeIndex }
    ::={dvbRcsOduRxTypeTable 1}

   DvbRcsOduRxTypeEntry ::= SEQUENCE {
                     dvbRcsOduRxTypeIndex           Unsigned32,
                     dvbRcsOduRxTypeDescription     SnmpAdminString
                     }

   dvbRcsOduRxTypeIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..32)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index for the LNB type."
   ::={dvbRcsOduRxTypeEntry 1}

   dvbRcsOduRxTypeDescription OBJECT-TYPE
       SYNTAX     SnmpAdminString
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "Text-based identification of an LNB type."
   ::={dvbRcsOduRxTypeEntry 2}

   dvbRcsOduRxType OBJECT-TYPE
       SYNTAX              Unsigned32
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Index of the selected LNB type."
   ::={dvbRcsOduRx 2}








Combes, et al.                Informational                    [Page 32]

RFC 5728                       DVB-RCS MIB                    March 2010


   --==============================================================
   -- ODU Antenna
   --==============================================================

   dvbRcsOduAntennaTypeTable OBJECT-TYPE
       SYNTAX  SEQUENCE OF DvbRcsOduAntennaTypeEntry
       MAX-ACCESS not-accessible
       STATUS  current
       DESCRIPTION
           "This table contains the identification of each well-
           known antenna type supported by the IDU and provides
           its associated index."
   ::={dvbRcsOduAntenna 1}

   dvbRcsOduAntennaTypeEntry OBJECT-TYPE
       SYNTAX            DvbRcsOduAntennaTypeEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the antenna type table."
       INDEX   { dvbRcsOduAntennaTypeIndex }
   ::={dvbRcsOduAntennaTypeTable 1}

   DvbRcsOduAntennaTypeEntry ::= SEQUENCE {
                 dvbRcsOduAntennaTypeIndex          Unsigned32,
                 dvbRcsOduAntennaTypeDescription    SnmpAdminString
                 }

   dvbRcsOduAntennaTypeIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..32)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index for the antenna type."
   ::={dvbRcsOduAntennaTypeEntry 1}

   dvbRcsOduAntennaTypeDescription OBJECT-TYPE
       SYNTAX     SnmpAdminString
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "Text-based identification of an antenna type."
   ::={dvbRcsOduAntennaTypeEntry 2}

   dvbRcsOduAntennaType OBJECT-TYPE
       SYNTAX              Unsigned32
       MAX-ACCESS          read-write
       STATUS              current



Combes, et al.                Informational                    [Page 33]

RFC 5728                       DVB-RCS MIB                    March 2010


       DESCRIPTION
           "Index of the selected antenna type."
   ::={dvbRcsOduAntenna 2}

   --==============================================================
   -- dvbRcsRcstNetwork sub-tree object types
   --==============================================================

   dvbRcsNetworkOamInetAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The type of Internet address of
           dvbRcsNetworkOamInetAddress.
           If the terminal OAM Internet address is unassigned or
           unknown, then the value of this object is unknown(0)."
   ::= {dvbRcsRcstNetwork 1}

   dvbRcsNetworkOamInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "OAM IP Address of the RCST.  This object is used with
           both IP and interfaces MIB-II subgroups.  It uniquely
           determines the interface through which OAM traffic
           passes.
           The OAM IP address may be statically or dynamically
           assigned.  It is system dependent whether the OAM IP
           address and the Traffic IP address are the same address.
           If the terminal has no OAM Internet address assigned or if
           this Internet address is unknown, the value of this
           object is the zero-length OCTET STRING.
           The InetAddressType is given by the
           dvbRcsNetworkOamInetAddressType object."
   ::= {dvbRcsRcstNetwork 2}

   dvbRcsNetworkOamInetAddressPrefixLength OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Prefix length for the OAM IP Address.  If this address
           prefix is unknown or does not apply, the value is zero."
   ::= {dvbRcsRcstNetwork 3}

   dvbRcsNetworkOamInetAddressAssign OBJECT-TYPE



Combes, et al.                Informational                    [Page 34]

RFC 5728                       DVB-RCS MIB                    March 2010


       SYNTAX             INTEGER    {
                   oamInetAddressStatic    (1),
                   oamInetAddressDynamic   (2)
       }
       MAX-ACCESS         read-write
       STATUS             current
       DESCRIPTION
           "Identifies whether the OAM IP address is statically
           (1) or dynamically (2) assigned."
   ::= {dvbRcsRcstNetwork 4}

   dvbRcsNetworkLanInetAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The type of Internet address of dvbRcsNetworkLanInetAddress.
           If the terminal Internet address on the LAN interface is
           unassigned or unknown, then the value of this object is
           unknown(0)."
   ::= {dvbRcsRcstNetwork 5}

   dvbRcsNetworkLanInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IP address of the LAN interface of the terminal.  If the
           terminal has no Internet address assigned on the LAN
           interface or if this Internet address is unknown, the
           value of this object is the zero-length OCTET STRING.
           The InetAddressType is given by the
           dvbRcsNetworkLanInetAddressType object."
   ::= {dvbRcsRcstNetwork 6}

   dvbRcsNetworkLanInetAddressPrefixLength OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Prefix length for the LAN IP Address of the terminal.
           If this address prefix is unknown or does not apply, the
           value is zero."
   ::= {dvbRcsRcstNetwork 7}

   dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType
   OBJECT-TYPE
       SYNTAX      InetAddressType



Combes, et al.                Informational                    [Page 35]

RFC 5728                       DVB-RCS MIB                    March 2010


       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The type of Internet address of
           dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress.
           If the default gateway Internet address is unassigned or
           unknown, then the value of this object is unknown(0)."
   ::= {dvbRcsRcstNetwork 8}

   dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IP address of the default gateway for the air
           interface.  If the terminal has no default gateway
           assigned on the air interface or if this Internet address
           is unknown, the value of this object is the zero-length
           OCTET STRING.
           The InetAddressType is given by the
           dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType
           object."
   ::= {dvbRcsRcstNetwork 9}

   dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength
   OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Prefix length for the IP address of the default gateway
           for the air interface.
           If this address prefix is unknown or does not apply, the
           value is zero."
   ::= {dvbRcsRcstNetwork 10}

   dvbRcsNetworkDnsServers OBJECT IDENTIFIER ::= {dvbRcsRcstNetwork
   11}

   dvbRcsPrimaryDnsServerInetAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The type of Internet address of
           dvbRcsPrimaryDnsServerInetAddress.  If the primary DNS
           server Internet address is unassigned or unknown, then
           the value of this object is unknown(0)."



Combes, et al.                Informational                    [Page 36]

RFC 5728                       DVB-RCS MIB                    March 2010


   ::= { dvbRcsNetworkDnsServers 1}

   dvbRcsPrimaryDnsServerInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IP address of the primary DNS server in the NCC.  If
           the terminal has no primary DNS server assigned or if this
           Internet address is unknown, the value of this object is
           the zero-length OCTET STRING.
           The InetAddressType is given by the
           dvbRcsPrimaryDnsServerInetAddressType object."
   ::= {dvbRcsNetworkDnsServers 2}

   dvbRcsPrimaryDnsServerInetAddressPrefixLength OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Prefix length for the IP address of the primary DNS
           server in the NCC.
           If this address prefix is unknown or does not apply, the
           value is zero."
   ::= { dvbRcsNetworkDnsServers 3}

   dvbRcsSecondaryDnsServerInetAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The type of Internet address of
           dvbRcsSecondaryDnsServerInetAddress.  If the secondary
           DNS server Internet address is unassigned or unknown,
           then the value of this object is unknown(0)."
   ::= { dvbRcsNetworkDnsServers 4}

   dvbRcsSecondaryDnsServerInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IP address of the secondary DNS server in the NCC.  If
           the terminal has no secondary DNS server assigned or if
           this Internet address is unknown, the value of this
           object is the zero-length OCTET STRING.
           The InetAddressType is given by the
           dvbRcsSecondaryDnsServerInetAddressType object."



Combes, et al.                Informational                    [Page 37]

RFC 5728                       DVB-RCS MIB                    March 2010


   ::= {dvbRcsNetworkDnsServers 5}

   dvbRcsSecondaryDnsServerInetAddressPrefixLength OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Prefix length for the IP address of the secondary DNS
           server in the NCC.
           If this address prefix is unknown or does not apply, the
           value is zero."
   ::= { dvbRcsNetworkDnsServers 6}

   dvbRcsNetworkNccMgtInetAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The type of Internet address of
           dvbRcsNetworkNccMgtInetAddress.  If the management server
           Internet address is unassigned or unknown, then the
           value of this object is unknown(0)."
   ::= {dvbRcsRcstNetwork 12}

   dvbRcsNetworkNccMgtInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IP address of the management server in the NCC.  If
           the terminal has no management server assigned or if this
           Internet address is unknown, the value of this object is
           the zero-length OCTET STRING.
           The InetAddressType is given by the
           dvbRcsNetworkNccMgtInetAddressType object."
   ::= {dvbRcsRcstNetwork 13}

   dvbRcsNetworkNccMgtInetAddressPrefixLength OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Prefix length for the IP address of the management
           server in the NCC.
           If this address prefix is unknown or does not apply, the
           value is zero."
   ::= { dvbRcsRcstNetwork 14}




Combes, et al.                Informational                    [Page 38]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsNetworkConfigFileDownloadUrl OBJECT-TYPE
       SYNTAX              Uri (SIZE(0..65535))
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path name for the configuration file download.
           It includes the protocol type (TFTP or FTP) and the
           associated server IP address or hostname.  Hostname can
           only be used if DNS is supported by the RCST.
           The format of this parameter follows RFC 3986."
   ::= {dvbRcsRcstNetwork 15}

   dvbRcsNetworkInstallLogFileDownloadUrl OBJECT-TYPE
       SYNTAX              Uri (SIZE(0..65535))
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path of the installation log file to download.
           It includes the protocol type (TFTP or FTP) and the
           associated server IP address or hostname.  Hostname can
           only be used if DNS is supported by the RCST.  The
           installation log file can be created on the installer's
           computer and downloaded to the RCST.
           The format of this parameter follows RFC 3986."
   ::= {dvbRcsRcstNetwork 16}

   dvbRcsNetworkConfigFileUploadUrl OBJECT-TYPE
       SYNTAX              Uri(SIZE(0..65535))
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path name for the configuration file upload.
           It includes the protocol type (TFTP or FTP) and the
           associated server IP address or hostname.  Hostname can
           only be used if DNS is supported by the RCST.
           The format of this parameter follows RFC 3986."
   ::= {dvbRcsRcstNetwork 17}














Combes, et al.                Informational                    [Page 39]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsNetworkLogFileUploadUrl OBJECT-TYPE
       SYNTAX              Uri(SIZE(0..65535))
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path of the event log file.  It includes the
           protocol type (TFTP or FTP) and the associated server IP
           address or hostname.  Hostname can only be used if DNS is
           supported by the RCST.
           The format of this parameter follows RFC 3986."
   ::= {dvbRcsRcstNetwork 18}

   dvbRcsNetworkInstallLogFileUploadUrl OBJECT-TYPE
       SYNTAX              Uri(SIZE(0..65535))
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Full path of the installation log file.  It includes the
           protocol type (TFTP or FTP) and the associated server
           IP address or hostname.  Hostname can only be used if DNS
           is supported by the RCST.  The installation log file can
           be retrieved from the RCST by the NCC or by the
           installer via the LAN.
           The format of this parameter follows RFC 3986."
   ::= {dvbRcsRcstNetwork 19}

   --==============================================================
   --    dvbRcsRcstInstall sub-tree object types
   --==============================================================
   dvbRcsInstallAntennaAlignmentState OBJECT-TYPE
       SYNTAX              INTEGER {
                   antennaAlignmentStart   (1),
                   antennaAlignmentDeny    (2),
                   antennaAlignmentContinue(3),
                   antennaAlignmentStop    (4),
                   antennaAlignmentSuccess (5),
                   antennaAlignmentFail    (6)
       }
       MAX-ACCESS          read-write
       STATUS              current











Combes, et al.                Informational                    [Page 40]

RFC 5728                       DVB-RCS MIB                    March 2010


       DESCRIPTION
           "Indicates the alignment state of the antenna:
               (1)-Start;
               (2)-Deny;
               (3)-Continue;
               (4)-Stop;
               (5)-Success;
               (6)-Fail"
   ::= {dvbRcsRcstInstall 1}

   dvbRcsInstallCwFrequency OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x100 Hz"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Frequency of the transmitted Continuous Wave
           carrier (in 100 Hz).
           Minimum required precision is 1 kHz."
   ::= {dvbRcsRcstInstall 2}

   dvbRcsInstallCwMaxDuration OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "seconds"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Time after which the Continuous Wave carrier must be
           put down (in seconds)."
   ::= {dvbRcsRcstInstall 3}

   dvbRcsInstallCwPower OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dBm"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "IDU TX output level when the IDU is configured to send
           CW.  The resolution is 0.1 dBm and the accuracy is +/- 1
           dBm.  Reconfiguration is applied immediately to a CW."
   ::= {dvbRcsRcstInstall 4}










Combes, et al.                Informational                    [Page 41]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsInstallCoPolReading OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Co-polarization measured value during installation
           procedure (in 0.1 dB)."
   ::= {dvbRcsRcstInstall 5}

   dvbRcsInstallXPolReading OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Cross-polarization measured value during installation
           procedure (in 0.1 dB)."
   ::= {dvbRcsRcstInstall 6}

   dvbRcsInstallCoPolTarget OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Co-polarization target value during installation
           procedure (in 0.1 dB)."
   ::= {dvbRcsRcstInstall 7}

   dvbRcsInstallXPolTarget OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Cross-polarization target value during installation
           procedure (in 0.1 dB)."
    ::= {dvbRcsRcstInstall 8}

   dvbRcsInstallStandByDuration OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "seconds"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Time to wait in stand-by mode (in seconds)."
   ::= {dvbRcsRcstInstall 9}



Combes, et al.                Informational                    [Page 42]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsInstallTargetEsN0 OBJECT-TYPE
       SYNTAX              Unsigned32(0..315)
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This value describes the wanted Es/N0 value that
           enables operation of the return link with the required
           error performance.  The values shall be given in tenth of
           dB and the initial value shall be equal to 7 dB.  The
           range shall be from 0 dB to 31.5 dB, with a precision
           of 0.1 dB."
       DEFVAL        { 70 }
   ::= {dvbRcsRcstInstall 10}

   --==============================================================
   -- dvbRcsRcstQos sub-tree object types
   --==============================================================
   dvbRcsPktClassTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF DvbRcsPktClassEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table describes the packet classification used in
           the DVB-RCS terminal.  The number of entries is specified
           by dvbRcsPktClassIndex. "
   ::={dvbRcsRcstQos 1}

   dvbRcsPktClassEntry OBJECT-TYPE
       SYNTAX            DvbRcsPktClassEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the packet classification table.  One object
           type of each entry may have a value in the active range
           (a non-default value).  The other object types are then
           assumed to be set to 'inactive'.  The entry with the lowest
           index value takes precedence when classifying a packet."
       INDEX   { dvbRcsPktClassIndex }
   ::= {dvbRcsPktClassTable 1}

   DvbRcsPktClassEntry ::= SEQUENCE {
               dvbRcsPktClassIndex                 Unsigned32,
               dvbRcsPktClassDscpLow               Dscp,
               dvbRcsPktClassDscpHigh              Dscp,
               dvbRcsPktClassDscpMarkValue         DscpOrAny,
               dvbRcsPktClassIpProtocol            Unsigned32,
               dvbRcsPktClassSrcInetAddressType    InetAddressType,



Combes, et al.                Informational                    [Page 43]

RFC 5728                       DVB-RCS MIB                    March 2010


               dvbRcsPktClassSrcInetAddress        InetAddress,
               dvbRcsPktClassSrcInetAddressPrefixLength
                                           InetAddressPrefixLength,
               dvbRcsPktClassDstInetAddressType    InetAddressType,
               dvbRcsPktClassDstInetAddress        InetAddress,
               dvbRcsPktClassDstInetAddressPrefixLength
                                           InetAddressPrefixLength,
               dvbRcsPktClassSrcPortLow            InetPortNumber,
               dvbRcsPktClassSrcPortHigh           InetPortNumber,
               dvbRcsPktClassDstPortLow            InetPortNumber,
               dvbRcsPktClassDstPortHigh           InetPortNumber,
               dvbRcsPktClassVlanUserPri           Integer32,
               dvbRcsPktClassPhbAssociation        Unsigned32,
               dvbRcsPktClassRowStatus             RowStatus
           }

   dvbRcsPktClassIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..64)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index automatically incremented by one at row
           creation."
   ::={dvbRcsPktClassEntry 1}

   dvbRcsPktClassDscpLow OBJECT-TYPE
       SYNTAX              Dscp
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the low value of a range of
           Diffserv Code Point (DSCP) values to which a packet is
           compared."
       DEFVAL { 0 }
   ::={dvbRcsPktClassEntry 2}

   dvbRcsPktClassDscpHigh OBJECT-TYPE
       SYNTAX              Dscp
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the high value of a range of
           Diffserv Code Point (DSCP) values to which a packet is
           compared."
       DEFVAL { 63 }
   ::={dvbRcsPktClassEntry 3}

   dvbRcsPktClassDscpMarkValue OBJECT-TYPE



Combes, et al.                Informational                    [Page 44]

RFC 5728                       DVB-RCS MIB                    March 2010


       SYNTAX              DscpOrAny
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object is the Diffserv Code Point (DSCP) value
           used to mark the packet; -1 indicates no DSCP marking.
           Possible DSCP marks values are (0..63)"
       DEFVAL { -1 }
   ::={dvbRcsPktClassEntry 4}

   dvbRcsPktClassIpProtocol OBJECT-TYPE
       SYNTAX              Unsigned32 (0..255)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the IP protocol to which a
           packet is compared.  A value of 255 means match all."
       DEFVAL { 255 }
   ::={dvbRcsPktClassEntry 5}

   dvbRcsPktClassSrcInetAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The type of Internet address of
           dvbRcsPktClassSrcInetAddress.  If the packet class source
           Internet address is unassigned or unknown, then the
           value of this object is unknown(0)."
   ::= { dvbRcsPktClassEntry 6}


   dvbRcsPktClassSrcInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the IP source address to which a
           packet is compared.  If the packet class has no source
           Internet address assigned or if this Internet address is
           unknown, the value of this object is the zero-length
           OCTET STRING.
           The InetAddressType is given by the
           dvbRcsPktClassSrcInetAddressType object."
   ::={dvbRcsPktClassEntry 7}

   dvbRcsPktClassSrcInetAddressPrefixLength OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength



Combes, et al.                Informational                    [Page 45]

RFC 5728                       DVB-RCS MIB                    March 2010


       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Prefix length of the IP source address that will be
           matched for this packet class.  A value of zero indicates
           that the selectivity is inactive."
       DEFVAL { 0 }
   ::={dvbRcsPktClassEntry 8}

   dvbRcsPktClassDstInetAddressType OBJECT-TYPE
       SYNTAX      InetAddressType
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
           "The type of Internet address of
           dvbRcsPktClassDstInetAddress.  If the packet class
           destination Internet address is unassigned or unknown,
           then the value of this object is unknown(0)."
   ::= { dvbRcsPktClassEntry 9}

   dvbRcsPktClassDstInetAddress OBJECT-TYPE
       SYNTAX              InetAddress
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the IP destination address to
           which a packet is compared.  If the packet class has no
           destination Internet address assigned or if this Internet
           address is unknown, the value of this object is the
           zero-length OCTET STRING.
           The InetAddressType is given by the
           dvbRcsPktClassDstInetAddressType object."
   ::={dvbRcsPktClassEntry 10}

   dvbRcsPktClassDstInetAddressPrefixLength OBJECT-TYPE
       SYNTAX              InetAddressPrefixLength
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Prefix length of the IP source address that will be
           matched for this packet class.  A value of zero indicates
           that the selectivity is inactive."
       DEFVAL { 0 }
   ::={dvbRcsPktClassEntry 11}







Combes, et al.                Informational                    [Page 46]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsPktClassSrcPortLow OBJECT-TYPE
       SYNTAX              InetPortNumber
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the low range of the source
           port to which a packet is compared.  A value of 0
           indicates that the selectivity is inactive."
       DEFVAL { 0 }
   ::={dvbRcsPktClassEntry 12}

   dvbRcsPktClassSrcPortHigh OBJECT-TYPE
       SYNTAX              InetPortNumber
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the high range of the source port
           to which a packet is compared.  A value of 0 indicates
           that the selectivity is inactive."
       DEFVAL { 65535 }
   ::={dvbRcsPktClassEntry 13}

   dvbRcsPktClassDstPortLow OBJECT-TYPE
       SYNTAX              InetPortNumber
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the low range of the destination
           port to which a packet is compared.  A value of 0
           indicates that the selectivity is inactive."
       DEFVAL { 0 }
   ::={dvbRcsPktClassEntry 14}

   dvbRcsPktClassDstPortHigh OBJECT-TYPE
       SYNTAX              InetPortNumber
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object specifies the high range of the destination
           port to which a packet is compared.  A value of 0
           indicates that the selectivity is inactive."
       DEFVAL { 65535 }
   ::={dvbRcsPktClassEntry 15}

   dvbRcsPktClassVlanUserPri OBJECT-TYPE
       SYNTAX              Integer32 (-1..7)
       MAX-ACCESS          read-create
       STATUS              current



Combes, et al.                Informational                    [Page 47]

RFC 5728                       DVB-RCS MIB                    March 2010


       DESCRIPTION
         "This object specifies the VLAN User Priority to which a
          packet is compared.  A value of -1 indicates that the
          selectivity is inactive."
       DEFVAL { -1 }
   ::={dvbRcsPktClassEntry 16}

   dvbRcsPktClassPhbAssociation OBJECT-TYPE
       SYNTAX              Unsigned32 (0..65535)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Associate the filter entry to a specific PHB (refer to
           dvbRcsPhbIdentifier)."
   ::={dvbRcsPktClassEntry 17}

   dvbRcsPktClassRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "The status of this conceptual row.  All writable objects
           in this row may be modified at any time."
   ::={dvbRcsPktClassEntry 18}

   --==============================================================
   -- dvbRcsPhbMappingTable
   --==============================================================
   dvbRcsPhbMappingTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF DvbRcsPhbMappingEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table is a list of Per-Hop Behavior (PHB) MIB
           entries.
           It describes the PHB mapping to the Request Class."
   ::={dvbRcsRcstQos 2}

   dvbRcsPhbMappingEntry OBJECT-TYPE
       SYNTAX            DvbRcsPhbMappingEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the PHB mapping table."
       INDEX   {dvbRcsPhbIdentifier}
   ::= {dvbRcsPhbMappingTable 1}

   DvbRcsPhbMappingEntry ::= SEQUENCE {



Combes, et al.                Informational                    [Page 48]

RFC 5728                       DVB-RCS MIB                    March 2010


                   dvbRcsPhbIdentifier               Unsigned32,
                   dvbRcsPhbName
                                                SnmpAdminString,
                   dvbRcsPhbRequestClassAssociation  Unsigned32,
                   dvbRcsPhbMappingRowStatus          RowStatus
                   }

   dvbRcsPhbIdentifier OBJECT-TYPE
       SYNTAX              Unsigned32 (0..65535)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Identification of the Per-Hop Behavior (PHB).  It
           follows the unsigned 16-bit binary encoding as specified
           in RFC 3140.  The value 0 designates the Default PHB."
   ::={dvbRcsPhbMappingEntry 1}

   dvbRcsPhbName OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "The name of the Per-Hop Behavior (PHB)."
   ::={dvbRcsPhbMappingEntry 2}

   dvbRcsPhbRequestClassAssociation OBJECT-TYPE
       SYNTAX              Unsigned32 (1..16)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "This object is an association of this Per-Hop Behavior
           (PHB) to a Request Class (by reference to a Request
           Class index)."
   ::={dvbRcsPhbMappingEntry 3}

   dvbRcsPhbMappingRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "The status of this conceptual row.  All writable
           objects in this row may be modified at any time."
       DEFVAL { active }
   ::={dvbRcsPhbMappingEntry 4}







Combes, et al.                Informational                    [Page 49]

RFC 5728                       DVB-RCS MIB                    March 2010


   --==============================================================
   --   dvbRcsRequestClassTable
   --==============================================================
   dvbRcsRequestClassTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF DvbRcsRequestClassEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table is a list of Request Class entries.  This
           class describes the layer 2 QoS objects."
   ::={dvbRcsRcstQos 3}

   dvbRcsRequestClassEntry OBJECT-TYPE
       SYNTAX            DvbRcsRequestClassEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the Request Class table."
       INDEX {dvbRcsRequestClassIndex}
   ::= {dvbRcsRequestClassTable 1}

   DvbRcsRequestClassEntry ::= SEQUENCE {
                   dvbRcsRequestClassIndex              Unsigned32,
                   dvbRcsRequestClassName
                                                   SnmpAdminString,
                   dvbRcsRequestClassChanId             Unsigned32,
                   dvbRcsRequestClassVccVpi             Unsigned32,
                   dvbRcsRequestClassVccVci             Unsigned32,
                   dvbRcsRequestClassPidPoolReference   Unsigned32,
                   dvbRcsRequestClassCra                Unsigned32,
                   dvbRcsRequestClassRbdcMax            Unsigned32,
                   dvbRcsRequestClassRbdcTimeout        Unsigned32,
                   dvbRcsRequestClassVbdcMax            Unsigned32,
                   dvbRcsRequestClassVbdcTimeout        Unsigned32,
                   dvbRcsRequestClassVbdcMaxBackLog     Unsigned32,
                   dvbRcsRequestClassRowStatus          RowStatus
                   }

   dvbRcsRequestClassIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..16)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the Request Class table.  A total of 16 entries
           are supported."
   ::={dvbRcsRequestClassEntry 1}

   dvbRcsRequestClassName OBJECT-TYPE



Combes, et al.                Informational                    [Page 50]

RFC 5728                       DVB-RCS MIB                    March 2010


       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Name of the Request Class."
   ::={dvbRcsRequestClassEntry 2}

   dvbRcsRequestClassChanId OBJECT-TYPE
       SYNTAX              Unsigned32 (0..15)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Channel ID of the Request Class."
   ::={dvbRcsRequestClassEntry 3}

   dvbRcsRequestClassVccVpi OBJECT-TYPE
       SYNTAX              Unsigned32 (0..255)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Defines the VPI used for the Request Class (ATM profile)."
    ::={dvbRcsRequestClassEntry 4}

   dvbRcsRequestClassVccVci OBJECT-TYPE
       SYNTAX              Unsigned32 (0..65535)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Defines the VCI used for the Request Class (ATM profile)."
   ::={dvbRcsRequestClassEntry 5}

   dvbRcsRequestClassPidPoolReference OBJECT-TYPE
       SYNTAX              Unsigned32 (1..16)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Reference to the Packet IDentifier (PID) pool
           applicable for the Request Class."
   ::={dvbRcsRequestClassEntry 6}

   dvbRcsRequestClassCra OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "bit/s"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Defines the Continuous Rate Assignment (CRA) level for the
           Request Class in bits per second (bit/s)."



Combes, et al.                Informational                    [Page 51]

RFC 5728                       DVB-RCS MIB                    March 2010


   ::={dvbRcsRequestClassEntry 7}

   dvbRcsRequestClassRbdcMax OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x2 kbit/s"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Maximum Rate-Based Dynamic Capacity (RBDC) that can be
           requested for the Request Class, in number of 2 kbit/s."
   ::={dvbRcsRequestClassEntry 8}

   dvbRcsRequestClassRbdcTimeout OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "superframes"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Persistence of the Rate-Based Dynamic Capacity (RBDC)
           request, expressed in superframes."
   ::={dvbRcsRequestClassEntry 9}

   dvbRcsRequestClassVbdcMax OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "ATM cells/MPEG packets"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Maximum Volume-Based Dynamic Capacity (VBDC) that can
           be allocated to the Request Class, in payload units (one
           ATM cell or one MPEG packet) per superframe."
   ::={dvbRcsRequestClassEntry 10}

   dvbRcsRequestClassVbdcTimeout OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "superframes"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Time after which the RCST considers that the pending
           requests are lost.  The RCST may issue new requests for
           that traffic.  Volume-Based Dynamic Capacity (VBDC)
           Timeout is expressed in superframes."
   ::={dvbRcsRequestClassEntry 11}

   dvbRcsRequestClassVbdcMaxBackLog OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "bytes"



Combes, et al.                Informational                    [Page 52]

RFC 5728                       DVB-RCS MIB                    March 2010


       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Volume-Based Dynamic Capacity (VBDC) back log per
           Request Class (expressed in bytes)."
   ::={dvbRcsRequestClassEntry 12}

   dvbRcsRequestClassRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "The status of this conceptual row.  It is not possible
           to change values in a row of this table while the row is
           active."
   ::={dvbRcsRequestClassEntry 13}

   --==============================================================
   -- The table of PID pools
   --==============================================================

   dvbRcsPidPoolTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF DvbRcsPidPoolEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table contains the Packet IDentifier (PID) pools.
           For the MPEG profile, several Request Classes may be mapped
           within a pool of several PIDs to allow Section Packing
           across several Request Classes.
           A PID value may occur in more than one PID pool.  Each
           PID value can effectively occur only once in each pool."
   ::={dvbRcsRcstQos 4}

   dvbRcsPidPoolEntry OBJECT-TYPE
       SYNTAX            DvbRcsPidPoolEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the PID pool table."
       INDEX { dvbRcsPidPoolIndex, dvbRcsPidIndex }
   ::= {dvbRcsPidPoolTable 1}

   DvbRcsPidPoolEntry ::= SEQUENCE {
           dvbRcsPidPoolIndex            Unsigned32,
           dvbRcsPidIndex                Unsigned32,
           dvbRcsPidValue                Unsigned32,
           dvbRcsPidPoolRowStatus        RowStatus



Combes, et al.                Informational                    [Page 53]

RFC 5728                       DVB-RCS MIB                    March 2010


           }

   dvbRcsPidPoolIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..16)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the PID pool in the PID pool table."
   ::={dvbRcsPidPoolEntry 1}

   dvbRcsPidIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..16)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the PID entry within the PID pool."
   ::={dvbRcsPidPoolEntry 2}

   dvbRcsPidValue OBJECT-TYPE
       SYNTAX              Unsigned32 (0..8191)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Defines one of the PIDs to be used in a PID pool of
           dvbRcsPidPoolIndex.
           A PID value may occur in more than one PID pool.  Each
           PID value can effectively occur only once in each pool."
   ::={dvbRcsPidPoolEntry 3}

   dvbRcsPidPoolRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "The status of this conceptual row.  All writable
           objects in this row may be modified at any time."
       DEFVAL { active }
   ::={dvbRcsPidPoolEntry 4}

   dvbRcsQosGlobalRbdcMax OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x2 kbit/s"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Global maximum RBDC that can be requested for the RCST,
           in number of 2 kbit/s."
   ::={dvbRcsRcstQos 5}



Combes, et al.                Informational                    [Page 54]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsQosGlobalVbdcMax OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "ATM cells/MPEG packets"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Global maximum VBDC that can be allocated to the RCST,
           in payload units (one ATM cell or one MPEG packet) per
           superframe."
   ::={dvbRcsRcstQos 6}

   dvbRcsQosGlobalVbdcMaxBackLog OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "bytes"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Global VBDC back log at the RCST level (expressed in
           bytes).  It is used only if the VBDC back log is not
           configured in the Request Class (expressed in bytes)."
   ::={dvbRcsRcstQos 7}

   dvbRcsQosChannelIdStrictDispatching OBJECT-TYPE
       SYNTAX              INTEGER {
                                   notStrict (0),
                                   strict    (1)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Indicates whether the RCST will strictly follow RC
           association when signaled through Channel_ID in the
           TBTP:
               (0)- no strict association
               (1)- strict association"
   ::={dvbRcsRcstQos 8}

   --==============================================================
   -- dvbRcsRcstControl sub-tree object types
   --==============================================================
   dvbRcsCtrlRebootCommand OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle        (1),
                                   normal      (2),
                                   alternate   (3)
       }
       MAX-ACCESS          read-write
       STATUS              current



Combes, et al.                Informational                    [Page 55]

RFC 5728                       DVB-RCS MIB                    March 2010


       DESCRIPTION
           "This variable shall force the RCST to reboot:
               (1)- idle
               (2)- normal reboot (from current software load)
               (3)- reboot from alternate load (swap to alternate
                    load before reboot)"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 1}

   dvbRcsCtrlRcstTxDisable OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle        (1),
                                   disable     (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable shall force the RCST to stop transmission
           (transmit disabled as defined in SatLabs System
            Recommendations):
               (1)- idle
               (2)- initiate Tx Disabled"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 2}

   dvbRcsCtrlUserTrafficDisable OBJECT-TYPE
       SYNTAX           INTEGER {
                                idle        (1),
                                disable     (2)
       }
       MAX-ACCESS       read-write
       STATUS           current
       DESCRIPTION
           "This variable shall disable user traffic (only RCST
           management traffic can be transmitted):
               (1)- idle
               (2)- disable user traffic"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 3}

   dvbRcsCtrlCwEnable OBJECT-TYPE
       SYNTAX           INTEGER {
                                off    (1),
                                on     (2)
       }
       MAX-ACCESS       read-write
       STATUS           current
       DESCRIPTION



Combes, et al.                Informational                    [Page 56]

RFC 5728                       DVB-RCS MIB                    March 2010


           "This variable will force the RCST to start transmission
           of CW, if the RCST is first set to the installation
           state and is properly configured for CW transmission:
              (1)- off
              (2)- on"
       DEFVAL {off}
   ::={dvbRcsRcstControl 4}

   dvbRcsCtrlOduTxReferenceEnable OBJECT-TYPE
       SYNTAX           INTEGER {
                                off    (1),
                                on     (2)
       }
       MAX-ACCESS       read-write
       STATUS           current
       DESCRIPTION
           "Enables activation and deactivation of the 10 MHz reference
            clock in the Tx IFL cable:
               (1) off
               (2) on"
       DEFVAL {on}
   ::={dvbRcsRcstControl 5}

   dvbRcsCtrlOduTxDCEnable OBJECT-TYPE
       SYNTAX              INTEGER {
                                   off    (1),
                                   on     (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Enables activation and deactivation of DC in the Tx IFL
           cable:
             (1) off
             (2) on"
       DEFVAL {on}
   ::={dvbRcsRcstControl 6}

   dvbRcsCtrlOduRxDCEnable OBJECT-TYPE
       SYNTAX              INTEGER {
                                   off    (1),
                                   on     (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Enables activation and deactivation of DC in the Rx IFL
           cable:



Combes, et al.                Informational                    [Page 57]

RFC 5728                       DVB-RCS MIB                    March 2010


             (1) off
             (2) on"
       DEFVAL {on}
   ::={dvbRcsRcstControl 7}

   dvbRcsCtrlDownloadFileCommand OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle            (1),
                                   config          (2),
                                   installationLog (3)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate an RCST configuration file
           download process:
           (1) idle
           (2) download RCST configuration file from TFTP/FTP
               server
           (3) download RCST installation log file from TFTP/FTP
               server (INSTALL_LOG feature)"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 8}

   dvbRcsCtrlUploadFileCommand OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle              (1),
                                   config            (2),
                                   eventAlarm        (3),
                                   installationLog   (4)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate an RCST upload process:
           (1) idle
           (2) upload RCST configuration file to TFTP/FTP server
           (3) upload RCST event/alarm log file to TFTP/FTP server
           (4) upload RCST installation log file to TFTP/FTP server
               (INSTALL_LOG feature)"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 9}

   dvbRcsCtrlActivateConfigFileCommand OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle            (1),
                                   activate        (2)
       }



Combes, et al.                Informational                    [Page 58]

RFC 5728                       DVB-RCS MIB                    March 2010


       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Triggers the RCST to use the configuration file and
           update its parameters accordingly.  Some RCST
           implementations may require a reboot for the parameters
           to take effect (vendor specific).
           (1)    idle
           (2)    activate"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 10}

   dvbRcsCtrlRcstLogonCommand OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle           (1),
                                   logon          (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate an RCST logon:
              (1) idle
              (2) initiate RCST logon"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 11}

   dvbRcsCtrlRcstLogoffCommand OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle      (1),
                                   logoff    (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "This variable will initiate an RCST logoff:
              (1) idle
              (2) initiate RCST logoff"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 12}

   dvbRcsCtrlRcstRxReacquire OBJECT-TYPE
       SYNTAX              INTEGER {
                                   idle                    (1),
                                   reacquireForwardLink    (2)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION



Combes, et al.                Informational                    [Page 59]

RFC 5728                       DVB-RCS MIB                    March 2010


           "This variable will force the RCST to acquire the
           forward link and start receiving:
              (1) idle
              (2) reacquire forward link"
       DEFVAL {idle}
   ::={dvbRcsRcstControl 13}

   --==============================================================
   -- dvbRcsRcstState sub-tree object types
   --==============================================================
   dvbRcsRcstMode OBJECT-TYPE
       SYNTAX              INTEGER {
                                   installation (0),
                                   operational  (1)
       }
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
         "Identifies the current mode of the RCST and allows the RCST
         to return to the installation mode when needed.  Values for
         the RCST mode are:
             Installation (0)
             Operational (1)"
   ::={dvbRcsRcstState 1}

   dvbRcsRcstFaultStatus OBJECT-TYPE
       SYNTAX              INTEGER {
                                   nofault (0),
                                   fault   (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Provides the fault status of the terminal.  The fault
           status management is vendor specific.  Values for the
           fault status are:
               no fault (0)
               fault (1)"
   ::={dvbRcsRcstState 2}

   dvbRcsRcstFwdLinkStatus OBJECT-TYPE
       SYNTAX              INTEGER {
                                   notAcquired (0),
                                   acquired    (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION



Combes, et al.                Informational                    [Page 60]

RFC 5728                       DVB-RCS MIB                    March 2010


           "Provides the status of the RCST forward link.  Values
           for the forward link status are:
             Not acquired (0)
             Acquired (1)"
   ::={dvbRcsRcstState 3}

   dvbRcsRcstRtnLinkStatus OBJECT-TYPE
       SYNTAX              INTEGER {
                                   loggedOff (0),
                                   loggedOn  (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Provides the status of the RCST return link.  Values for
           the return link status are:
               Logged-off (0)
               Logged-on (1)"
   ::={dvbRcsRcstState 4}

   dvbRcsRcstLogUpdated OBJECT-TYPE
       SYNTAX              INTEGER {
                                   noUpdate         (0),
                                   logfileUpdated   (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates the existence of an updated event log file:
               No update (0)
               Event Log file updated (1)
           The RCST should remove the 'Event Log file updated'
           indication as the log file is fetched by the NCC."
   ::={dvbRcsRcstState 5}

   dvbRcsRcstCurrentSoftwareVersion OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Current RCST software version."
   ::={dvbRcsRcstState 6}

   dvbRcsRcstAlternateSoftwareVersion OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION



Combes, et al.                Informational                    [Page 61]

RFC 5728                       DVB-RCS MIB                    March 2010


           "Alternate (backup/new) RCST software version."
   ::={dvbRcsRcstState 7}

   dvbRcsRcstActivatedConfigFileVersion OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Version of the most recently activated configuration
           file.
           The version is vendor specific."
   ::={dvbRcsRcstState 8}

   dvbRcsRcstDownloadedConfigFileVersion OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
         "Version of the most recently downloaded configuration
          file.
          Version is vendor specific.  If the value is different
          from dvbRcsRcstActivatedConfigFileVersion, it is pending
          for activation."
   ::={dvbRcsRcstState 9}

   --==============================================================
   -- dvbRcsFwdConfig sub-tree object types
   --==============================================================
   dvbRcsFwdStartTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF DvbRcsFwdStartEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Lists forward link attachment points (e.g., different
           for installation and operation).
           The table describes the forward link parameters used for
           the start-up stream with the NCC."
   ::={dvbRcsFwdConfig 1}

   dvbRcsFwdStartEntry OBJECT-TYPE
       SYNTAX            DvbRcsFwdStartEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the Forward Link Start Configuration table."
       INDEX {dvbRcsFwdStartIndex}
   ::= {dvbRcsFwdStartTable 1}




Combes, et al.                Informational                    [Page 62]

RFC 5728                       DVB-RCS MIB                    March 2010


   DvbRcsFwdStartEntry ::= SEQUENCE {
                       dvbRcsFwdStartIndex         Unsigned32,
                       dvbRcsFwdStartPopId         Integer32,
                       dvbRcsFwdStartFrequency     Unsigned32,
                       dvbRcsFwdStartPolar         INTEGER,
                       dvbRcsFwdStartFormat        INTEGER,
                       dvbRcsFwdStartRolloff       INTEGER,
                       dvbRcsFwdStartSymbolRate    Unsigned32,
                       dvbRcsFwdStartInnerFec      INTEGER,
                       dvbRcsFwdStartRowStatus     RowStatus
   }

   dvbRcsFwdStartIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..8)
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "Index of the Forward Link StartConfig table."
   ::={dvbRcsFwdStartEntry 1}

   dvbRcsFwdStartPopId OBJECT-TYPE
       SYNTAX              Integer32 (-1..65535)
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Population identifier associated with the start-up
            forward link:
               -1: any (auto)
               0-65535: specific StartPopId
            If 'any' is set, the RCST will assume membership of any
            announced population ID and will commence with logon in
            accordance with this assumption."
   ::={dvbRcsFwdStartEntry 2}

   dvbRcsFwdStartFrequency OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x100 kHz"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Frequency of the start transponder carrying a
           Network Information Table to which any RCST shall
           trigger to acquire forward link.  Its value shall be
           given in multiples of 100 kHz."
   ::={dvbRcsFwdStartEntry 3}

   dvbRcsFwdStartPolar OBJECT-TYPE
       SYNTAX              INTEGER   {



Combes, et al.                Informational                    [Page 63]

RFC 5728                       DVB-RCS MIB                    March 2010


                                     linearHorizontal (0),
                                     linearVertical   (1),
                                     circularLeft     (2),
                                     circularRight    (3)
       }
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "2-bit field giving the polarization of the start
           transponder carrying a Network Information Table to
           which any RCST shall trigger to acquire forward link:
               00: linear and horizontal
               01: linear and vertical
               10: circular left
               11: circular right"
   ::={dvbRcsFwdStartEntry 4}

   dvbRcsFwdStartFormat OBJECT-TYPE
       SYNTAX              INTEGER {
                                   auto     (-1),
                                   dvbs      (0),
                                   dvbs2ccm  (1),
                                   dvbs2acm  (2)
       }
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Specifies the transmission format standard applied for
           the startup stream.  The start transport stream carries a
           Network Information Table that the RCST uses for
           acquiring the forward link signaling.  Supported values
           are:
               -1: unspecified (automatic format acquisition is
                   assumed)
                0: DVB-S (support of this value is mandatory if
                   DVB-S support is claimed)
                1: DVB-S2 with CCM (support of this value is
                   mandatory if DVB-S2 CCM support is claimed)
                2: DVB-S2 with VCM or ACM (support of this value is
                   mandatory if DVB-S2 ACM support is claimed)
           This allows the RCST to discriminate between CCM and
           VCM/ACM when selecting the forward link.
           The support of automatic format selection is optional.
           One or several of the other format selections must be
           supported, according to the claimed SatLabs profile
           support."
   ::={dvbRcsFwdStartEntry 5}




Combes, et al.                Informational                    [Page 64]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsFwdStartRolloff OBJECT-TYPE
       SYNTAX        INTEGER {
                             autoRolloff    (0),
                             rolloff020     (1),
                             rolloff025     (2),
                             rolloff035     (3)
       }
       MAX-ACCESS    read-create
       STATUS        current
       DESCRIPTION
           "Specifies the receive filter roll-off applied on the
           start transponder.  The start transponder carries a
           Network Information Table that the RCST uses for
           acquiring the forward link signaling.
           Supported values are:
               0: any (auto)
               1: 0.20
               2: 0.25
               3: 0.35"
   ::={dvbRcsFwdStartEntry 6}

   dvbRcsFwdStartSymbolRate OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x100 symbols/s"
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Specifies the symbol rate on the start transponder
           carrying a Network Information Table to which any RCST
           shall trigger to acquire forward link.  Its value shall
           be given in multiples of 100 symbols/s."
   ::={dvbRcsFwdStartEntry 7}

   dvbRcsFwdStartInnerFec OBJECT-TYPE
       SYNTAX              INTEGER     {
                                       autoFec     (-1),
                                       fecRate12    (0),
                                       fecRate23    (1),
                                       fecRate34    (2),
                                       fecRate56    (3),
                                       fecRate78    (4),
                                       fecRate89    (5),
                                       fecRate35    (6),
                                       fecRate45    (7),
                                       fecRate910   (8),
                                       fecRate25    (9),
                                       fecRate13   (10),
                                       fecRate14   (11),



Combes, et al.                Informational                    [Page 65]

RFC 5728                       DVB-RCS MIB                    March 2010


                                       noInnerCode (12)
       }
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "Specifies the inner Forward Error Correction used on
           the start transponder carrying a Network Information
           Table to which any RCST shall trigger to acquire forward
           link.
           Supported values are:
                   autoFec      (-1),
                   fecRate1/2    (0),
                   fecRate2/3    (1),
                   fecRate3/4    (2),
                   fecRate5/6    (3),
                   fecRate7/8    (4),
                   fecRate8/9    (5),
                   fecRate3/5    (6),
                   fecRate4/5    (7),
                   fecRate9/10   (8),
                   fecRate2/5    (9),
                   fecRate1/3    (10),
                   fecRate1/4    (11),
                   noInnerCode   (12)
       The support of autoFec is optional."
   ::={dvbRcsFwdStartEntry 8}

   dvbRcsFwdStartRowStatus OBJECT-TYPE
       SYNTAX              RowStatus
       MAX-ACCESS          read-create
       STATUS              current
       DESCRIPTION
           "The status of this conceptual row.  It is not possible
           to change values in a row of this table while the row is
           active."
   ::={dvbRcsFwdStartEntry 9}

   --==============================================================
   --  dvbRcsFwdStatus sub-tree object types
   --==============================================================
   dvbRcsFwdStatusPopId OBJECT-TYPE
       SYNTAX              Unsigned32 (0..65535)
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Population identifier applied at log-on:
               0-65535: specific StartPopId
           If the RCST was allowed to logon with any population,



Combes, et al.                Informational                    [Page 66]

RFC 5728                       DVB-RCS MIB                    March 2010


           the RCST will report the base number of the announced
           population ID indicated by the RCS Map Table linkage
           descriptor used at logon."
   ::={dvbRcsFwdStatus 1}

   dvbRcsFwdStatusTable OBJECT-TYPE
       SYNTAX              SEQUENCE OF DvbRcsFwdStatusEntry
       MAX-ACCESS          not-accessible
       STATUS              current
       DESCRIPTION
           "This table describes the current status of Forward Link
           interfaces."
   ::={dvbRcsFwdStatus 2}

   dvbRcsFwdStatusEntry OBJECT-TYPE
       SYNTAX            DvbRcsFwdStatusEntry
       MAX-ACCESS        not-accessible
       STATUS            current
       DESCRIPTION
           "An entry in the forward link status table.  Each entry
           is associated with a physical interface.
           An RCST shall support at least one entry."
       INDEX { dvbRcsFwdStatusIndex }
   ::= {dvbRcsFwdStatusTable 1}

   DvbRcsFwdStatusEntry ::= SEQUENCE {
                   dvbRcsFwdStatusIndex             Unsigned32,
                   dvbRcsFwdStatusIfReference       Unsigned32,
                   dvbRcsFwdStatusNetId             Unsigned32,
                   dvbRcsFwdStatusNetName
                                               SnmpAdminString,
                   dvbRcsFwdStatusFormat            INTEGER,
                   dvbRcsFwdStatusFrequency         Unsigned32,
                   dvbRcsFwdStatusPolar             INTEGER,
                   dvbRcsFwdStatusInnerFec          INTEGER,
                   dvbRcsFwdStatusSymbolRate        Unsigned32,
                   dvbRcsFwdStatusRolloff           INTEGER,
                   dvbRcsFwdStatusModulation        INTEGER,
                   dvbRcsFwdStatusFecFrame          INTEGER,
                   dvbRcsFwdStatusPilot             INTEGER,
                   dvbRcsFwdStatusBer               Integer32,
                   dvbRcsFwdStatusCnr               Integer32,
                   dvbRcsFwdStatusRxPower           Integer32
   }

   dvbRcsFwdStatusIndex OBJECT-TYPE
       SYNTAX              Unsigned32 (1..8)
       MAX-ACCESS          not-accessible



Combes, et al.                Informational                    [Page 67]

RFC 5728                       DVB-RCS MIB                    March 2010


       STATUS              current
       DESCRIPTION
           "Index of the forward link status table."
   ::={dvbRcsFwdStatusEntry 1}

   dvbRcsFwdStatusIfReference OBJECT-TYPE
       SYNTAX              Unsigned32 (1..8)
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Cross reference to the interface table."
   ::={dvbRcsFwdStatusEntry 2}

   dvbRcsFwdStatusNetId OBJECT-TYPE
       SYNTAX              Unsigned32
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Interactive network identifier of the forward
           link (from the RCS Map Table)."
   ::={dvbRcsFwdStatusEntry 3}

   dvbRcsFwdStatusNetName OBJECT-TYPE
       SYNTAX              SnmpAdminString
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "The name of the interactive network of the forward
           link (from the RCS Map Table)."
   ::={dvbRcsFwdStatusEntry 4}

   dvbRcsFwdStatusFormat OBJECT-TYPE
       SYNTAX              INTEGER  {
                                    dvbs            (0),
                                    dvbs2ccm        (1),
                                    dvbs2acm        (2),
                                    reservedFormat  (3)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Specifies the transmission format applied on the
           forward link.  Supported values are (from RCS Map Table):
               0: DVB-S
               1: DVB-S2 using CCM
               2: DVB-S2 using VCM or ACM
               3: reserved"
   ::={dvbRcsFwdStatusEntry 5}



Combes, et al.                Informational                    [Page 68]

RFC 5728                       DVB-RCS MIB                    March 2010


   dvbRcsFwdStatusFrequency OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x100 kHz"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "An estimate of the frequency of the forward link.  Its
           value shall be given in multiples of 100 kHz."
   ::={dvbRcsFwdStatusEntry 6}

   dvbRcsFwdStatusPolar OBJECT-TYPE
       SYNTAX              INTEGER   {
                                     linearHorizontal (0),
                                     linearVertical   (1),
                                     circularLeft     (2),
                                     circularRight    (3)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "2-bit field giving the polarization of the forward link
           Supported values are (from RCS Map Table):
               00: linear and horizontal
               01: linear and vertical
               10: circular left
               11: circular right"
   ::={dvbRcsFwdStatusEntry 7}

   dvbRcsFwdStatusInnerFec OBJECT-TYPE
       SYNTAX              INTEGER     {
                                       unknown     (-1),
                                       fecRate12    (0),
                                       fecRate23    (1),
                                       fecRate34    (2),
                                       fecRate56    (3),
                                       fecRate78    (4),
                                       fecRate89    (5),
                                       fecRate35    (6),
                                       fecRate45    (7),
                                       fecRate910   (8),
                                       fecRate25    (9),
                                       fecRate13   (10),
                                       fecRate14   (11),
                                       noInnerCode (12)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION



Combes, et al.                Informational                    [Page 69]

RFC 5728                       DVB-RCS MIB                    March 2010


           "Specifies the inner Forward Error Correction used on
           the forward link for transmission to the RCST.
           Supported values are:
                   unknown      (-1),
                   fecRate1/2    (0),
                   fecRate2/3    (1),
                   fecRate3/4    (2),
                   fecRate5/6    (3),
                   fecRate7/8    (4),
                   fecRate8/9    (5),
                   fecRate3/5    (6),
                   fecRate4/5    (7),
                   fecRate9/10   (8),
                   fecRate2/5    (9),
                   fecRate1/3    (10),
                   fecRate1/4    (11),
                   noInnerCode   (12)
           The RCST will report a value that has been used for
           transmission to the RCST within the most recent 60
           seconds.  If this is not relevant, the RCST will report
           'unknown'."
   ::={dvbRcsFwdStatusEntry 8}

   dvbRcsFwdStatusSymbolRate OBJECT-TYPE
       SYNTAX              Unsigned32
       UNITS               "x100 symbols/s"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "An estimate of the symbol rate of the forward link.
           Its value shall be given in multiples of 100 symbols/s."
   ::={dvbRcsFwdStatusEntry 9}

   dvbRcsFwdStatusRolloff OBJECT-TYPE
       SYNTAX              INTEGER   {
                                     undefRolloff       (0),
                                     rolloff020         (1),
                                     rolloff025         (2),
                                     rolloff035         (3)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "An estimate of the roll-off applied on the forward
           link.
           Supported values are:
               0: undefined
               1: 0.20



Combes, et al.                Informational                    [Page 70]

RFC 5728                       DVB-RCS MIB                    March 2010


               2: 0.25
               3: 0.35"
   ::={dvbRcsFwdStatusEntry 10}

    dvbRcsFwdStatusModulation OBJECT-TYPE
       SYNTAX              INTEGER   {
                                     unknown        (0),
                                     mBPSK          (1),
                                     mQPSK          (2),
                                     m8PSK          (3),
                                     m16APSK        (4),
                                     m32APSK        (5)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates the modulation on the forward link used for
           transmission to the RCST. Supported values are:
               0: unknown
               1: BPSK
               2: QPSK
               3: 8PSK
               4: 16APSK
               5: 32APSK
           The RCST will report a value that has been used for
           transmission to the RCST within the most recent 60
           seconds.
           If this is not relevant, the RCST will report
           'unknown'."
   ::={dvbRcsFwdStatusEntry 11}

   dvbRcsFwdStatusFecFrame OBJECT-TYPE
       SYNTAX              INTEGER {
                                   unknown       (0),
                                   shortframe    (1),
                                   longframe     (2)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates the frame length used on the forward link for
           transmission to the RCST.
           Supported values are:
               0: Unknown
               1: Short frame
               2: Normal frame
           The RCST will report a value that has been used for
           transmission to the RCST within the most recent 60



Combes, et al.                Informational                    [Page 71]

RFC 5728                       DVB-RCS MIB                    March 2010


           seconds.
           If this is not relevant, the RCST will report
           'unknown'."
   ::={dvbRcsFwdStatusEntry 12}

   dvbRcsFwdStatusPilot OBJECT-TYPE
       SYNTAX              INTEGER {
                                   unknown      (0),
                                   pilotNotused (1),
                                   pilotUsed    (2)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates whether pilots are used on the forward link
           for transmission to the RCST.
           Supported values are:
               0: Unknown
               1: Pilots are not used
               2: Pilots are used
           The RCST will report a value that has been used for
           transmission to the RCST within the most recent 60
           seconds.
           If this is not relevant, the RCST will report
           'unknown'."
   ::={dvbRcsFwdStatusEntry 13}

   dvbRcsFwdStatusBer OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "exponent of 10"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Provides the RCST BER on the Forward Link in log10
           units."
   ::={dvbRcsFwdStatusEntry 14}

   dvbRcsFwdStatusCnr OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "0.1 dB"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Provides the RCST CNR on the Forward Link in 0.1 dB
           units."
   ::={dvbRcsFwdStatusEntry 15}

   dvbRcsFwdStatusRxPower OBJECT-TYPE



Combes, et al.                Informational                    [Page 72]

RFC 5728                       DVB-RCS MIB                    March 2010


       SYNTAX              Integer32
       UNITS               "0.1 dBm"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Provides the power level of the forward link as
           received at the IDU, in 0.1 dBm units."
       DEFVAL { -500 }
   ::={dvbRcsFwdStatusEntry 16}

   --==============================================================
   --  dvbRcsRtnConfig sub-tree object types
   --==============================================================
   dvbRcsRtnConfigMaxEirp OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dBm"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
           "Max Equivalent Isotropic Radiated Power (EIRP) of the RCST,
            given in resolution of 0.1 dBm and applied when the IDU
            can, itself, set the necessary IDU TX output level, e.g.,
            when using a BUC that has a power level detector and that
            provides sufficient feedback to the IDU."
   ::= {dvbRcsRtnConfig 1}

   dvbRcsRtnConfigDefIfLevel OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dBm"
       MAX-ACCESS          read-write
       STATUS              current
       DESCRIPTION
            "IDU TX output level applied in case the
            dvbRcsRtnConfigMaxEirp cannot be used.  The resolution
            is 0.1 dBm and the accuracy is +/- 1 dBm."
   ::= {dvbRcsRtnConfig 2}

   --==============================================================
   --  dvbRcsRtnStatus sub-tree object types
   --==============================================================
   dvbRcsRtnStatusEbN0 OBJECT-TYPE
       SYNTAX              Integer32
       UNITS               "x0.1 dB"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "The EbN0 value reported for the return link, referenced
           to the regular SYNC burst transmission, in 0.1 dB



Combes, et al.                Informational                    [Page 73]

RFC 5728                       DVB-RCS MIB                    March 2010


           units."
   ::= {dvbRcsRtnStatus 1}

   dvbRcsRtnStatusSFDuration OBJECT-TYPE
       SYNTAX              Unsigned32 (250..7500)
       UNITS               "0.1 ms"
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "The duration of the currently applied return link
           superframe structure, in tenths of milliseconds."
   ::= {dvbRcsRtnStatus 2}

   dvbRcsRtnStatusPayloadUnit OBJECT-TYPE
       SYNTAX              INTEGER   {
                                     unitATM    (0),
                                     unitMPEG   (1)
       }
       MAX-ACCESS          read-only
       STATUS              current
       DESCRIPTION
           "Indicates if the payload unit used for the return link
           is ATM or MPEG."
   ::= {dvbRcsRtnStatus 3}

   --=============================================================
   --    conformance information
   --=============================================================
   dvbRcsRcstGroups          OBJECT IDENTIFIER ::=
   {dvbRcsConformance 1}
   dvbRcsRcstCompliances     OBJECT IDENTIFIER ::=
   {dvbRcsConformance 2}

   --=============================================================
   --    conformance statements
   --=============================================================
   dvbRcsRcstCompliance1 MODULE-COMPLIANCE
        STATUS          current
        DESCRIPTION
            "The compliance statement for DVB-RCS terminals that
            are compliant with SatLabs System Recommendations.
            Compliance is linked to the support by the terminal of
            the options or features defined in the SatLabs System
            Recommendations.
            The supported options and features of a terminal are
            declared in objects
            dvbRcsSystemSatLabsOptionsDeclaration
            and dvbRcsSystemSatLabsFeaturesDeclaration



Combes, et al.                Informational                    [Page 74]

RFC 5728                       DVB-RCS MIB                    March 2010


            respectively."

       MODULE  -- this module

              MANDATORY-GROUPS    {dvbRcsRcstSystemGroup,
   dvbRcsRcstNetworkGroup, dvbRcsRcstInstallGroup,
   dvbRcsRcstQosGroup, dvbRcsRcstControlGroup,
   dvbRcsRcstStateGroup, dvbRcsFwdConfigGroup,
   dvbRcsFwdStatusGroup, dvbRcsRtnConfigGroup,
   dvbRcsRtnStatusGroup}

   GROUP dvbRcsRcstExtNetworkGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports extended
            networking management functionality.  Such RCST is qualified
            as supporting the EXTNETWORK feature, as defined in the
            SatLabs System Recommendations."

   GROUP dvbRcsRcstDnsGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports the DNS
            protocol.  Such RCST is qualified as supporting the DNS
            option, as defined in the SatLabs System Recommendations."

   GROUP dvbRcsRcstExtInstallGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports the
            installation log file.  Such RCST is qualified as supporting
            the INSTALL_LOG feature, as defined in the SatLabs System
            Recommendations."

   GROUP dvbRcsRcstEnhancedClassifierGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports the
            enhanced classifier feature.  Such RCST is qualified as
            supporting the ENHCLASSIFIER feature, as defined in the
            SatLabs System Recommendations."

   GROUP dvbRcsRcstMpegQosGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports MPEG
            traffic bursts.  Such RCST is qualified as supporting the
            MPEG_TRF option, as defined in the SatLabs System
            Recommendations."

   GROUP dvbRcsRcstGlobalQosGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports global



Combes, et al.                Informational                    [Page 75]

RFC 5728                       DVB-RCS MIB                    March 2010


            RCST QoS configuration data.  Such RCST is qualified as
            supporting the RCST_PARA feature, as defined in the SatLabs
            System Recommendations."

   GROUP dvbRcsRcstStrictQosGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports strict
            channel ID dispatching.  Such RCST is qualified as
            supporting the CHID_STRICT option, as defined in the SatLabs
            System Recommendations."

   GROUP dvbRcsRcstExtControlGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports extended
            control management functionality.  Such RCST is qualified as
            supporting the EXTCONTROL feature, as defined in the SatLabs
            System Recommendations."

   GROUP dvbRcsRtnExtConfigGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports extended
            return link configuration management functionality.  Such
            RCST is qualified as supporting the EXTCONFIG feature, as
            defined in the SatLabs System Recommendations."

   GROUP dvbRcsRtnExtStatusGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports extended
            return link status report functionality.  Such RCST is
            qualified as supporting the EXTSTATUS feature, as defined in
            the SatLabs System Recommendations."

   GROUP dvbRcsRcstOduListGroup
        DESCRIPTION
            "This group is mandatory for an RCST that supports the ODU
            structural entities defined under dvbRcsOduTx, dvbRcsOduRx,
            and dvbRcsOduAntenna.  Such RCST is qualified as supporting
            the ODULIST feature, as defined in the SatLabs System
            Recommendations."

   OBJECT dvbRcsSystemOduAntennaSize
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access must be supported if dvbRcsRcstOduListGroup is
            not supported."

   OBJECT dvbRcsSystemOduAntennaGain
        MIN-ACCESS read-only



Combes, et al.                Informational                    [Page 76]

RFC 5728                       DVB-RCS MIB                    March 2010


        DESCRIPTION
            "Write access must be supported if dvbRcsRcstOduListGroup is
            not supported."

   OBJECT dvbRcsSystemOduSspa
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access must be supported if dvbRcsRcstOduListGroup is
            not supported."

   OBJECT dvbRcsSystemOduTxType
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access must be supported if dvbRcsRcstOduListGroup is
            not supported."

   OBJECT dvbRcsSystemOduRxType
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access must be supported if dvbRcsRcstOduListGroup is
            not supported."

   OBJECT dvbRcsSystemOduRxBand
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access must be supported if dvbRcsRcstOduListGroup is
            not supported."

   OBJECT dvbRcsSystemOduRxLO
        MIN-ACCESS read-only
        DESCRIPTION
            "Write access must be supported if dvbRcsRcstOduListGroup is
            not supported."

   OBJECT dvbRcsSystemOduTxLO
     MIN-ACCESS read-only
     DESCRIPTION
         "Write access must be supported if dvbRcsRcstOduListGroup is
         not supported."

   OBJECT dvbRcsNetworkOamInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsNetworkOamInetAddress
        SYNTAX InetAddress (SIZE(4))



Combes, et al.                Informational                    [Page 77]

RFC 5728                       DVB-RCS MIB                    March 2010


        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsNetworkLanInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsNetworkLanInetAddress
        SYNTAX InetAddress (SIZE(4))
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress
        SYNTAX InetAddress (SIZE(4))
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsPrimaryDnsServerInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsPrimaryDnsServerInetAddress
        SYNTAX InetAddress (SIZE(4))
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsSecondaryDnsServerInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsSecondaryDnsServerInetAddress
         SYNTAX InetAddress (SIZE(4))



Combes, et al.                Informational                    [Page 78]

RFC 5728                       DVB-RCS MIB                    March 2010


         DESCRIPTION
             "An implementation is only required to support IPv4
             addresses."

   OBJECT dvbRcsNetworkNccMgtInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsNetworkNccMgtInetAddress
        SYNTAX InetAddress (SIZE(4))
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsPktClassDscpLow
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports the
            enhanced classifier feature.  Such RCST is qualified as
            supporting the ENHCLASSIFIER feature, as defined in the
            SatLabs System Recommendations."

   OBJECT dvbRcsPktClassDscpHigh
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports the
            enhanced classifier feature.  Such RCST is qualified as
            supporting the ENHCLASSIFIER feature, as defined in the
            SatLabs System Recommendations."

   OBJECT dvbRcsPktClassDscpMarkValue
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports the
            enhanced classifier feature.  Such RCST is qualified as
            supporting the ENHCLASSIFIER feature, as defined in the
            SatLabs System Recommendations."

   OBJECT dvbRcsPktClassSrcInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsPktClassSrcInetAddress
        SYNTAX InetAddress (SIZE(4))



Combes, et al.                Informational                    [Page 79]

RFC 5728                       DVB-RCS MIB                    March 2010


        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsPktClassDstInetAddressType
        SYNTAX InetAddressType { ipv4(1) }
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsPktClassDstInetAddress
        SYNTAX InetAddress (SIZE(4))
        DESCRIPTION
            "An implementation is only required to support IPv4
            addresses."

   OBJECT dvbRcsPhbName
       MIN-ACCESS read-only
       DESCRIPTION
           "Create access only required if the RCST supports extended
           management support.  Such RCST is qualified as supporting
           the SNMPMISC option, as defined in the SatLabs System
           Recommendations."

   OBJECT dvbRcsPhbRequestClassAssociation
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support.  Such RCST is qualified as supporting
            the SNMPMISC option, as defined in the SatLabs System
            Recommendations."

   OBJECT dvbRcsPhbMappingRowStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support.  Such RCST is qualified as supporting
            the SNMPMISC option, as defined in the SatLabs System
            Recommendations."

   OBJECT dvbRcsRequestClassName
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support.  Such RCST is qualified as supporting
            the SNMPMISC option, as defined in the SatLabs System
            Recommendations."




Combes, et al.                Informational                    [Page 80]

RFC 5728                       DVB-RCS MIB                    March 2010


   OBJECT dvbRcsRequestClassChanId
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support.  Such RCST is qualified as supporting
            the SNMPMISC option, as defined in the SatLabs System
            Recommendations."

   OBJECT dvbRcsRequestClassVccVpi
       MIN-ACCESS read-only
       DESCRIPTION
           "Create access only required if the RCST supports extended
           management support.  Such RCST is qualified as supporting
           the SNMPMISC option, as defined in the SatLabs System
           Recommendations."

   OBJECT dvbRcsRequestClassVccVci
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support.  Such RCST is qualified as supporting
            the SNMPMISC option, as defined in the SatLabs System
            Recommendations."

   OBJECT dvbRcsRequestClassPidPoolReference
        MIN-ACCESS not-accessible
        DESCRIPTION
            "Read-only access required if the RCST supports MPEG traffic
            bursts, according to the MPEG_TRF option, as defined in the
            SatLabs System Recommendations.  Create access only required
            if the RCST also supports extended management support,
            according to the SNMPMISC option, as defined in the SatLabs
            System Recommendations."

   OBJECT dvbRcsRequestClassCra
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support, according to the SNMPMISC option, as
            defined in the SatLabs System Recommendations."

   OBJECT dvbRcsRequestClassRbdcMax
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support, according to the SNMPMISC option, as
            defined in the SatLabs System Recommendations."




Combes, et al.                Informational                    [Page 81]

RFC 5728                       DVB-RCS MIB                    March 2010


   OBJECT dvbRcsRequestClassRbdcTimeout
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support, according to the SNMPMISC option, as
            defined in the SatLabs System Recommendations."

   OBJECT dvbRcsRequestClassVbdcMax
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support, according to the SNMPMISC option, as
            defined in the SatLabs System Recommendations."

   OBJECT dvbRcsRequestClassVbdcTimeout
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support, according to the SNMPMISC option, as
            defined in the SatLabs System Recommendations."

   OBJECT dvbRcsRequestClassVbdcMaxBackLog
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support, according to the SNMPMISC option, as
            defined in the SatLabs System Recommendations."

   OBJECT dvbRcsRequestClassRowStatus
        MIN-ACCESS read-only
        DESCRIPTION
            "Create access only required if the RCST supports extended
            management support, according to the SNMPMISC option, as
            defined in the SatLabs System Recommendations."

   OBJECT dvbRcsPidValue
        MIN-ACCESS not-accessible
        DESCRIPTION
            "Read-only access required if the RCST supports MPEG traffic
            bursts, according to the MPEG_TRF option, as defined in the
            SatLabs System Recommendations.  Create access only required
            if the RCST also supports extended management support,
            according to the SNMPMISC option, as defined in the SatLabs
            System Recommendations."

   OBJECT dvbRcsPidPoolRowStatus
        MIN-ACCESS not-accessible
        DESCRIPTION



Combes, et al.                Informational                    [Page 82]

RFC 5728                       DVB-RCS MIB                    March 2010


            "Read-only access required if the RCST supports MPEG traffic
            bursts, according to the MPEG_TRF option, as defined in the
            SatLabs System Recommendations.  Create access only required
            if the RCST also supports extended management support,
            according to the SNMPMISC option, as defined in the SatLabs
            System Recommendations."

           ::= {dvbRcsRcstCompliances 1}

   --=============================================================
   --    units of conformance
   --=============================================================

   --=============================================================
   --    object groups for RCST system
   --=============================================================
   dvbRcsRcstSystemGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsSystemMibRevision,
           dvbRcsSystemSatLabsProfilesDeclaration,
           dvbRcsSystemSatLabsOptionsDeclaration,
           dvbRcsSystemSatLabsFeaturesDeclaration,
           dvbRcsSystemLocation,
           dvbRcsSystemOduAntennaSize,
           dvbRcsSystemOduAntennaGain,
           dvbRcsSystemOduSspa,
           dvbRcsSystemOduTxType,
           dvbRcsSystemOduRxType,
           dvbRcsSystemOduRxBand,
           dvbRcsSystemOduRxLO,
           dvbRcsSystemOduTxLO,
           dvbRcsTcpPep,
           dvbRcsHttpPep
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects providing information
           applicable for basic device management support."
   ::= {dvbRcsRcstGroups 1}

   --=============================================================
   --    object groups for RCST networking
   --=============================================================
   dvbRcsRcstNetworkGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsNetworkOamInetAddressType,
           dvbRcsNetworkOamInetAddress,
           dvbRcsNetworkOamInetAddressPrefixLength,



Combes, et al.                Informational                    [Page 83]

RFC 5728                       DVB-RCS MIB                    March 2010


           dvbRcsNetworkLanInetAddressType,
           dvbRcsNetworkLanInetAddress,
           dvbRcsNetworkLanInetAddressPrefixLength,
           dvbRcsNetworkConfigFileDownloadUrl,
           dvbRcsNetworkConfigFileUploadUrl,
           dvbRcsNetworkLogFileUploadUrl
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects providing basic networking
           management support."
   ::= {dvbRcsRcstGroups 2}

   dvbRcsRcstExtNetworkGroup OBJECT-GROUP
       OBJECTS {
         dvbRcsNetworkOamInetAddressAssign,
         dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressType,
         dvbRcsNetworkAirInterfaceDefaultGatewayInetAddress,
         dvbRcsNetworkAirInterfaceDefaultGatewayInetAddressPrefixLength,
         dvbRcsNetworkNccMgtInetAddressType,
         dvbRcsNetworkNccMgtInetAddress,
         dvbRcsNetworkNccMgtInetAddressPrefixLength
         }
       STATUS    current
       DESCRIPTION
           "A collection of objects providing extended networking
           management support."
   ::= {dvbRcsRcstGroups 3}

   dvbRcsRcstDnsGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsPrimaryDnsServerInetAddressType,
           dvbRcsPrimaryDnsServerInetAddress,
           dvbRcsPrimaryDnsServerInetAddressPrefixLength,
           dvbRcsSecondaryDnsServerInetAddressType,
           dvbRcsSecondaryDnsServerInetAddress,
           dvbRcsSecondaryDnsServerInetAddressPrefixLength
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects providing DNS management
           support."
   ::= {dvbRcsRcstGroups 4}








Combes, et al.                Informational                    [Page 84]

RFC 5728                       DVB-RCS MIB                    March 2010


   --=============================================================
   --    object groups for RCST installation
   --=============================================================

   dvbRcsRcstInstallGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsInstallAntennaAlignmentState,
           dvbRcsInstallCwFrequency,
           dvbRcsInstallCwMaxDuration,
           dvbRcsInstallCwPower,
           dvbRcsInstallCoPolReading,
           dvbRcsInstallXPolReading,
           dvbRcsInstallCoPolTarget,
           dvbRcsInstallXPolTarget,
           dvbRcsInstallStandByDuration,
           dvbRcsInstallTargetEsN0
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects providing information
           applicable for basic installation support."
   ::= {dvbRcsRcstGroups 5}

   dvbRcsRcstExtInstallGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsNetworkInstallLogFileDownloadUrl,
           dvbRcsNetworkInstallLogFileUploadUrl
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects providing extended device
           installation support."
   ::= {dvbRcsRcstGroups 6}

   --=============================================================
   --    object groups for QoS
   --=============================================================

   dvbRcsRcstQosGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsPktClassDscpLow,
          dvbRcsPktClassDscpHigh,
          dvbRcsPktClassDscpMarkValue,
          dvbRcsPktClassPhbAssociation,
          dvbRcsPktClassRowStatus,
          dvbRcsPhbName,
          dvbRcsPhbRequestClassAssociation,
          dvbRcsPhbMappingRowStatus,



Combes, et al.                Informational                    [Page 85]

RFC 5728                       DVB-RCS MIB                    March 2010


          dvbRcsRequestClassName,
          dvbRcsRequestClassChanId,
          dvbRcsRequestClassVccVpi,
          dvbRcsRequestClassVccVci,
          dvbRcsRequestClassCra,
          dvbRcsRequestClassRbdcMax,
          dvbRcsRequestClassRbdcTimeout,
          dvbRcsRequestClassVbdcMax,
          dvbRcsRequestClassVbdcTimeout,
          dvbRcsRequestClassVbdcMaxBackLog,
          dvbRcsRequestClassRowStatus
          }
      STATUS    current
      DESCRIPTION
          "A collection of objects providing basic access to QoS
          configuration data."
   ::= {dvbRcsRcstGroups 7}

   dvbRcsRcstEnhancedClassifierGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsPktClassIpProtocol,
          dvbRcsPktClassSrcInetAddressType,
          dvbRcsPktClassSrcInetAddress,
          dvbRcsPktClassSrcInetAddressPrefixLength,
          dvbRcsPktClassDstInetAddressType,
          dvbRcsPktClassDstInetAddress,
          dvbRcsPktClassDstInetAddressPrefixLength,
          dvbRcsPktClassSrcPortLow,
          dvbRcsPktClassSrcPortHigh,
          dvbRcsPktClassDstPortLow,
          dvbRcsPktClassDstPortHigh,
          dvbRcsPktClassVlanUserPri
          }
      STATUS    current
      DESCRIPTION
          "A collection of objects providing support for
          management of the enhanced classifier."
   ::= {dvbRcsRcstGroups 8}

   dvbRcsRcstMpegQosGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsRequestClassPidPoolReference,
          dvbRcsPidValue,
          dvbRcsPidPoolRowStatus
          }
      STATUS    current
      DESCRIPTION
          "A collection of objects providing access to



Combes, et al.                Informational                    [Page 86]

RFC 5728                       DVB-RCS MIB                    March 2010


          MPEG-related link QoS configuration data."

   ::= {dvbRcsRcstGroups 9}

   dvbRcsRcstGlobalQosGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsQosGlobalRbdcMax,
          dvbRcsQosGlobalVbdcMax,
          dvbRcsQosGlobalVbdcMaxBackLog
          }
      STATUS    current
      DESCRIPTION
          "A collection of objects providing access to global RCST
          QoS configuration data."
   ::= {dvbRcsRcstGroups 10}

   dvbRcsRcstStrictQosGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsQosChannelIdStrictDispatching
          }
      STATUS    current
      DESCRIPTION
          "A collection of objects allowing management of strict
          channel ID dispatching."
   ::= {dvbRcsRcstGroups 11}

   --=============================================================
   --    object groups for RCST control
   --=============================================================
   dvbRcsRcstControlGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsCtrlRebootCommand,
           dvbRcsCtrlUserTrafficDisable,
           dvbRcsCtrlCwEnable,
           dvbRcsCtrlDownloadFileCommand,
           dvbRcsCtrlUploadFileCommand,
           dvbRcsCtrlActivateConfigFileCommand,
           dvbRcsCtrlRcstRxReacquire
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects allowing basic RCST control."
   ::= {dvbRcsRcstGroups 12}

   dvbRcsRcstExtControlGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsCtrlRcstTxDisable,
           dvbRcsCtrlOduTxReferenceEnable,



Combes, et al.                Informational                    [Page 87]

RFC 5728                       DVB-RCS MIB                    March 2010


           dvbRcsCtrlOduTxDCEnable,
           dvbRcsCtrlOduRxDCEnable,
           dvbRcsCtrlRcstLogonCommand,
           dvbRcsCtrlRcstLogoffCommand
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects allowing extended RCST
           control."
   ::= {dvbRcsRcstGroups 13}

   --=============================================================
   --    object groups for RCST state
   --=============================================================

   dvbRcsRcstStateGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsRcstMode,
           dvbRcsRcstFaultStatus,
           dvbRcsRcstFwdLinkStatus,
           dvbRcsRcstLogUpdated,
           dvbRcsRcstCurrentSoftwareVersion,
           dvbRcsRcstAlternateSoftwareVersion,
           dvbRcsRcstActivatedConfigFileVersion,
           dvbRcsRcstDownloadedConfigFileVersion
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects allowing access to RCST state."
   ::= {dvbRcsRcstGroups 14}

   --=============================================================
   --    object groups for forward link
   --=============================================================

   dvbRcsFwdConfigGroup OBJECT-GROUP
       OBJECTS {
               dvbRcsFwdStartPopId,
               dvbRcsFwdStartFrequency,
               dvbRcsFwdStartPolar,
               dvbRcsFwdStartFormat,
               dvbRcsFwdStartRolloff,
               dvbRcsFwdStartSymbolRate,
               dvbRcsFwdStartInnerFec,
               dvbRcsFwdStartRowStatus
           }
       STATUS    current
       DESCRIPTION



Combes, et al.                Informational                    [Page 88]

RFC 5728                       DVB-RCS MIB                    March 2010


           "A collection of objects providing basic start forward
           link configuration support."
   ::= {dvbRcsRcstGroups 15}

   dvbRcsFwdStatusGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsFwdStatusPopId,
          dvbRcsFwdStatusIfReference,
          dvbRcsFwdStatusNetId,
          dvbRcsFwdStatusNetName,
          dvbRcsFwdStatusFormat,
          dvbRcsFwdStatusFrequency,
          dvbRcsFwdStatusPolar,
          dvbRcsFwdStatusInnerFec,
          dvbRcsFwdStatusSymbolRate,
          dvbRcsFwdStatusRolloff,
          dvbRcsFwdStatusModulation,
          dvbRcsFwdStatusFecFrame,
          dvbRcsFwdStatusPilot,
          dvbRcsFwdStatusBer,
          dvbRcsFwdStatusCnr,
          dvbRcsFwdStatusRxPower
       }
      STATUS    current
      DESCRIPTION
          "A collection of objects providing forward link status."
   ::= {dvbRcsRcstGroups 16}

   --=============================================================
   --    object groups for return link
   --=============================================================
    dvbRcsRtnConfigGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsRtnConfigDefIfLevel
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects providing basic return link
           configuration support."
   ::= {dvbRcsRcstGroups 17}

   dvbRcsRtnExtConfigGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsRtnConfigMaxEirp
          }
      STATUS    current
      DESCRIPTION
          "A collection of objects providing extended return link



Combes, et al.                Informational                    [Page 89]

RFC 5728                       DVB-RCS MIB                    March 2010


          configuration support."
   ::= {dvbRcsRcstGroups 18}

   dvbRcsRtnStatusGroup OBJECT-GROUP
      OBJECTS {
          dvbRcsRtnStatusPayloadUnit
          }
      STATUS    current
      DESCRIPTION
          "A collection of objects allowing access to return link
          status."
   ::= {dvbRcsRcstGroups 19}

   dvbRcsRtnExtStatusGroup OBJECT-GROUP
       OBJECTS {
           dvbRcsRcstRtnLinkStatus,
           dvbRcsRtnStatusEbN0,
           dvbRcsRtnStatusSFDuration
           }
       STATUS    current
       DESCRIPTION
           "A collection of objects allowing access to extended
           return link status."
   ::= {dvbRcsRcstGroups 20}

   dvbRcsRcstOduListGroup OBJECT-GROUP
          OBJECTS {
              dvbRcsOduTxTypeDescription,
              dvbRcsOduTxType,
              dvbRcsOduRxTypeDescription,
              dvbRcsOduRxType,
              dvbRcsOduAntennaTypeDescription,
              dvbRcsOduAntennaType
              }
          STATUS    current
          DESCRIPTION
              "A collection of objects supporting flexible
              selection of ODU devices."
   ::= {dvbRcsRcstGroups 21}

   END










Combes, et al.                Informational                    [Page 90]

RFC 5728                       DVB-RCS MIB                    March 2010


5.  Security Considerations



   This MIB module relates to a system that allows end users to access a
   private network or public Internet access.  As such, improper
   manipulation of the MIB objects represented by this MIB module may
   result in denial of service to a large number of end users.

   There are a number of management objects defined in this MIB module
   with a MAX-ACCESS clause of read-write and/or read- create.  Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.  These are the tables and objects and their
   sensitivity/vulnerability:

   o  The use of the dvbRcsNetworkNccMgtInetAddress object to specify
      management stations is considered only limited protection and does
      not protect against attacks that spoof the management station's IP
      address.  The use of stronger mechanisms, such as SNMPv3 security,
      should be considered, where possible.

   o  The dvbRcsSystemOdu objects, dvbRcsCtrlCwEnable,
      dvbRcsRtnConfigMaxEirp, dvbRcsRtnConfigDefIfLevel objects, and
      dvbRcsRcstInstall sub-tree can, if improperly or maliciously used,
      lead to unwanted emissions or emission levels on the satellite
      uplink, thereby resulting in potential degradation of the RCS
      service or other services using the frequency band being used.

   o  The RCST may have its configuration file changed by the actions of
      the management system using a combination of the following
      objects: dvbRcsNetworkInstallLogFileDownloadUrl,
      dvbRcsCtrlDownloadFileCommand,
      dvbRcsCtrlActivateConfigFileCommand, or dvbRcsCtrlRebootCommand.
      An improper configuration file download may result in substantial
      vulnerabilities and the loss of the ability of the management
      system to control the satellite terminal.

   o  Setting dvbRcsNetworkLogFileUploadUrl to a wrong address may
      potentially impact debugging/troubleshooting efforts.

   o  Setting objects in dvbRcsPktClassTable could cause significant
      changes to default traffic filtering on an RCST.

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over



Combes, et al.                Informational                    [Page 91]

RFC 5728                       DVB-RCS MIB                    March 2010


   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   o  The dvbRcsNetworkNccMgtInetAddress object may provide sufficient
      information for attackers to spoof management stations that have
      management access to the device.

   o  The dvbRcsRcstCurrentSoftwareVersion object may provide hints as
      to the software vulnerabilities of the RCST.

   o  The object dvbRcsNetworkOamInetAddress and the table
      dvbRcsPktClassTable may provide clues for attacking the RCST and
      other subscriber devices.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED
.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module, is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

6.  IANA Considerations



   The transmission and ifType numbers described in Section 3 have
   already been assigned under the smi-numbers registry.

7.  Acknowledgments



   The authors thank Gorry Fairhurst for advice in the preparation of
   this document and Bert Wijnen for his review comments.

   The authors recognize this document is a collective effort of the
   SatLabs Group (www.satlabs.org), in particular the many corrections
   and suggestions brought by Juan Luis Manas.





Combes, et al.                Informational                    [Page 92]

RFC 5728                       DVB-RCS MIB                    March 2010


8.  References



8.1.  Normative References



   [IANA]       Internet Assigned Numbers Authority, "Internet Assigned
                Numbers Authority", June 2008, <http://www.iana.org>.

   [RFC2119]    Bradner, S., "Key words for use in RFCs to Indicate
                Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578]    McCloghrie, K., Perkins, D., and J. Schoenwaelder,
                "Structure of Management Information Version 2 (SMIv2)",
                STD 58, RFC 2578, April 1999.

   [RFC2579]    McCloghrie, K., Perkins, D., and J. Schoenwaelder,
                "Textual Conventions for SMIv2", STD 58, RFC 2579, April
                1999.

   [RFC2580]    McCloghrie, K., Perkins, D., and J. Schoenwaelder,
                "Conformance Statements for SMIv2", STD 58, RFC 2580,
                April 1999.

   [RFC2863]    McCloghrie, K. and F. Kastenholz, "The Interfaces Group
                MIB", RFC 2863, June 2000.

   [RFC3289]    Baker, F., Chan, K., and A. Smith, "Management
                Information Base for the Differentiated Services
                Architecture", RFC 3289, May 2002.

   [RFC3411]    Harrington, D., Presuhn, R., and B. Wijnen, "An
                Architecture for Describing Simple Network Management
                Protocol (SNMP) Management Frameworks", STD 62, RFC
                3411, December 2002.

   [RFC4001]    Daniele, M., Haberman, B., Routhier, S., and J.
                Schoenwaelder, "Textual Conventions for Internet Network
                Addresses", RFC 4001, February 2005.

   [RFC5017]    McWalter, D., Ed., "MIB Textual Conventions for Uniform
                Resource Identifiers (URIs)", RFC 5017, September 2007.











Combes, et al.                Informational                    [Page 93]

RFC 5728                       DVB-RCS MIB                    March 2010


8.2.  Informative References



   [ISO-MPEG]   ISO/IEC DIS 13818-1:2000, "Information Technology;
                Generic Coding of Moving Pictures and Associated Audio
                Information Systems", International Organization for
                Standardization (ISO).

   [ITU-ATM]    ITU-T Recommendation I.432 (all parts): "B-ISDN user-
                network interface - Physical layer specification".

   [ITU-AAL5]   ITU-T Recommendation I.363-5 (1996): "B-ISDN ATM
                Adaptation Layer specification: Type 5 AAL".

   [ETSI-DAT]   ETSI EN 301 192, "Digital Video Broadcasting (DVB); DVB
                Specifications for Data Broadcasting", European
                Telecommunications Standards Institute (ETSI).

   [ETSI-DVBS]  ETSI EN 301 421, "Digital Video Broadcasting (DVB);
                Modulation and Coding for DBS satellite systems at 11/12
                GHz", European Telecommunications Standards Institute
                (ETSI).

   [ETSI-DVBS2] ETSI EN 302 307, "Digital Video Broadcasting (DVB);
                Second generation framing structure, channel coding and
                modulation systems for Broadcasting, Interactive
                Services, News Gathering and other broadband satellite
                applications", European Telecommunications Standards
                Institute (ETSI).

   [ETSI-GSE]   ETSI TS 102 606, "Digital Video Broadcasting (DVB);
                Generic Stream Encapsulation (GSE) Protocol", European
                Telecommunications Standards Institute (ETSI).

   [ETSI-RCS]   ETSI 301 790, "Digital Video Broadcasting (DVB);
                Interaction Channel for Satellite Distribution Systems",
                European Telecommunications Standards Institute (ETSI).

   [ETSI-SI]    ETSI EN 300 468, "Digital Video Broadcasting (DVB);
                Specification for Service Information (SI) in DVB
                Systems", European Telecommunications Standards
                Institute (ETSI).

   [RFC3410]    Case, J., Mundy, R., Partain, D., and B. Stewart,
                "Introduction and Applicability Statements for Internet-
                Standard Management Framework", RFC 3410, December 2002.

   [SATLABS]    SatLabs System Recommendations,
                <http://www.satlabs.org>.



Combes, et al.                Informational                    [Page 94]

RFC 5728                       DVB-RCS MIB                    March 2010


Authors' Addresses



   Stephane Combes
   ESTEC
   European Space Agency
   Keplerlaan 1
   P.O. Box 299
   2200 AG Noordwijk ZH
   The Netherlands

   EMail: stephane.combes@esa.int
   URL:   telecom.esa.int


   Petter Chr. Amundsen
   VeriSat AS
   P.O Box 1
   1330 Fornebu
   Norway

   EMail: pca@verisat.no
   URL:   www.verisat.no


   Micheline Lambert
   Advantech Satellite Networks
   2341 boul. Alfred-Nobel
   Saint-Laurent (Montreal)
   H4S 2A9
   Quebec, Canada

   EMail: micheline.lambert@advantechamt.com
   URL:   www.advantechsatnet.com


   Hans Peter Lexow
   STM Norway
   Vollsveien 21
   1366 Lysaker
   Norway

   EMail: hlexow@stmi.com
   URL:   www.stmi.com








Combes, et al.                Informational                    [Page 95]