RFC 759


IEN: 113
RFC: 759

                                    
                                    
                                    
                                    
                                    
                       INTERNET MESSAGE PROTOCOL
                                    
                                    
                                    
                           Jonathan B. Postel

















                              August 1980
                                    
                                    
                                    
                                    
                     Information Sciences Institute
                   University of Southern California
                           4676 Admiralty Way
                   Marina del Rey, California  90291

                             (213) 822-1511


August 1980                                                            
                                               Internet Message Protocol



                           TABLE OF CONTENTS

    PREFACE ........................................................ iii

1.  INTRODUCTION ..................................................... 1

  1.1.  Motivation ................................................... 1
  1.2.  Scope ........................................................ 1
  1.3.  The Internetwork Environment ................................. 2
  1.4.  Model of Operation ........................................... 2
  1.5.  Interfaces ................................................... 4

2.  FUNCTIONAL DESCRIPTION ........................................... 5

  2.1.  Terminology .................................................. 5
  2.2.  Assumptions  ................................................. 5
  2.3.  General Specification ........................................ 6
  2.4.  Mechanisms ................................................... 7
  2.5.  Relation to Other Protocols ................................. 10

3.  DETAILED SPECIFICATION .......................................... 13

  3.1.  Overview of Message Structure ............................... 13
  3.2.  Message Structure ........................................... 14
  3.3.  Identification .............................................. 15
  3.4.  Command ..................................................... 15
  3.5.  Document .................................................... 19
  3.6.  Message Objects ............................................. 20
  3.7.  Data Elements ............................................... 27

4.  OTHER ISSUES .................................................... 35

  4.1.  Accounting and Billing ...................................... 35
  4.2.  Addressing and Routing ...................................... 36
  4.3.  Encryption .................................................. 37

5.  The MPM:  A Possible Architecture ............................... 39

  5.1.  Interfaces .................................................. 39
  5.2.  MPM Organization ............................................ 40

6.  EXAMPLES & SCENARIOS ............................................ 45

  Example 1:  Message Format ........................................ 45
  Example 2:  Delivery and Acknowledgment ........................... 47





Postel                                                          [Page i]


                                                             August 1980
Internet Message Protocol
Table Of Contents



7.  SPECIFICATION SUMMARY ........................................... 55

  7.1.  Message Fields .............................................. 55
  7.2.  Deliver Message ............................................. 58
  7.3.  Acknowledge Message ......................................... 59
  7.4.  Probe Message ............................................... 61
  7.5.  Response Message ............................................ 62
  7.6.  Cancel Message .............................................. 64
  7.7.  Canceled Message ............................................ 66
  7.8.  Data Element Summary ........................................ 68

REFERENCES .......................................................... 69

  



































[Page ii]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                                PREFACE



This is the second edition of this specification and should be treated
as a request for comments, advice, and suggestions.  A great deal of
prior work has been done on computer aided message systems and some of
this is listed in the reference section.  This specification was shaped
by many discussions with members of the ARPA research community, and
others interested in the development of computer aided message systems.
This document was prepared as part of the ARPA sponsored Internetwork
Concepts Research Project at ISI, with the assistance of Greg Finn,
Suzanne Sluizer, Alan Katz, Paul Mockapetris, and Linda Sato.

                                                              Jon Postel



































Postel                                                        [Page iii]


IEN: 113                                                       J. Postel
RFC: 759                                                         USC-ISI
                                                             August 1980




                       INTERNET MESSAGE PROTOCOL



                            1.  INTRODUCTION



This document describes an internetwork message system.  The system is
designed to transmit messages between message processing modules
according to formats and procedures specified in this document.  The
message processing modules are processes in host computers.  Message
processing modules are located in different networks and together
constitute an internetwork message delivery system.

This document is intended to provide all the information necessary to
implement a compatible cooperating module of this internetwork message
delivery system.

1.1.  Motivation



  As computer supported message processing activities grow on individual
  host computers and in networks of computers, there is a natural desire
  to provide for the interconnection and interworking of such systems.
  This specification describes the formats and procedures of a general
  purpose internetwork message system, which can be used as a standard
  for the interconnection of individual message systems, or as a message
  delivery system in its own right.

  This system also provides for the communication of data items beyond
  the scope of contemporary message systems.  Messages can include data
  objects which could represent drawings, or facsimile images, or
  digitized speech.  One can imagine message stations equipped with
  speakers and microphones (or telephone hand sets) where the body of a
  message or a portion of it is recorded digitized speech.  The output
  terminal could include a graphics display, and the message might
  present a drawing on the display, and verbally (via the speaker)
  describe certain features of the drawing.  This specification provides
  for the composition of complex data objects and their encoding in
  machine independent basic data elements.

1.2.  Scope



  The Internet Message Protocol is intended to be used for the
  transmission of messages between networks.  It may also be used for
  the local message system of a network or host.  This specification was



Postel                                                          [Page 1]


                                                             August 1980
Internet Message Protocol
Introduction



  developed in the context of the ARPA work on the interconnection of
  networks, but it is thought that it has a more general scope.

  The focus here is on the internal mechanisms to transmit messages,
  rather than the external interface to users.  It is assumed that a
  number of user interface programs will exist.  These will be both new
  programs designed to work with this system and old programs designed
  to work with earlier systems.

1.3.  The Internetwork Environment



  The internetwork message environment consists of processes which run
  in hosts which are connected to networks which are interconnected by
  gateways.  Each network consists of many different hosts.  The
  networks are tied together through gateways.  The gateways are
  essentially hosts on two (or more) networks and are not assumed to
  have much storage capacity or to "know" which hosts are on the
  networks to which they are attached [1,2].

1.4.  Model of Operation



  This protocol is implemented in a process called a Message Processing
  Module or MPM.  The MPMs exchange messages by establishing full duplex
  communication and sending the messages in a fixed format described in
  this document.  The MPM may also communicate other information by
  means of commands described here.

  A message is formed by a user interacting with a User Interface
  Program or UIP.  The user may utilize several commands to create
  various fields of the message and may invoke an editor program to
  correct or format some or all of the message.  Once the user is
  satisfied with the message it is submitted for transmission by placing
  it in a data structure read by the MPM.

  The MPM discovers the unprocessed input data (either by a specific
  request or by a general background search), examines it, and, using
  routing tables (or some other method), determines which outgoing link
  to use.  The destination may be another user on the same host, one on
  another host on a network in common with the same host, or a user in
  another network.

  In the first case, another user on this host, the MPM places the
  message in a data structure read by the destination user, where that
  user's UIP will look for incoming messages.

  In the second case, the user on another host in this network, the MPM
  transmits the message to the MPM on that host.  That MPM then repeats


[Page 2]                                                          Postel


August 1980                                                            
                                               Internet Message Protocol
                                                            Introduction



  the routing decision, and discovering the destination is local to it,
  places the message in the data structure shared with the destination
  user.

  In the third case, the user on a host in another network, the MPM
  transmits the messages to an MPM in that network if it knows how to
  establish a connection directly to it; otherwise, the MPM transmits
  the message to an MPM that is "closer" to the destination.  An MPM
  might not know of direct connections to MPMs in all other networks,
  but it must be able to select a next MPM to handle the message for
  each possible destination network.

  An MPM might know a way to establish direct connections to each of a
  few MPMs in other nearby networks, and send all other messages to a
  particular big brother MPM that has a wider knowledge of the internet
  environment.

  An individual network's message system may be quite different from the
  internet message system.  In this case, intranet messages will be
  delivered using the network's own message system.  If a message is
  addressed outside the network, it is given to an MPM which then sends
  it through the appropriate gateways to (or towards) the MPM in the
  destination network.  Eventually, the message gets to an MPM on the
  network of the recipient of the message.  The message is then sent via
  the local message system to that host.

  When local message protocols are used, special conversion programs are
  required to transform local messages to internet format when they are
  going out, and to transform internet messages to local format when
  they come into the local environment.  Such transformations
  potentially lead to information loss.  The internet message format
  attempts to provide features to capture all the information any local
  message system might use.  However, a particular local message system
  is unlikely to have features equivalent to all the possible features
  of the internet message system.  Thus, in some cases the
  transformation of an internet message to a local message discards some
  of the information.  For example, if an internet message carrying
  mixed text and speech data in the body is to be delivered in a local
  system which only carries text, the speech data may be replaced by the
  text string "There was some speech here".  Such discarding of
  information is to be avoided when at all possible, and to be deferred
  as long as possible; still, the possibility remains that in some cases
  it is the only reasonable thing to do.






Postel                                                          [Page 3]


                                                             August 1980
Internet Message Protocol
Introduction



1.5.  Interfaces



  The MPM calls on a reliable communication procedure to communicate
  with other MPMs.  This is a Transport Level protocol such as the
  Transmission Control Protocol (TCP) [3].  The interface to such a
  procedure conventionally provides calls to open and close connections,
  send and receive data on a connection, and some means to signal and be
  notified of special conditions (i.e., interrupts).

  The MPM receives input and produces output through data structures
  that are produced and consumed respectively by user interface (or
  other) programs.

  



































[Page 4]                                                          Postel


August 1980                                                            
                                               Internet Message Protocol



                       2.  FUNCTIONAL DESCRIPTION



This section gives an overview of the Internet Message System and its
environment.

2.1.  Terminology



  The messages are routed by a process called the Message Processing
  Module or MPM.  Messages are created and consumed by User Interface
  Programs (UIPs) in conjunction with users.

  The basic unit transferred between MPMs is called a message.  A
  message is made up of a transaction identifier (which uniquely
  identifies the message), a command (which contains the necessary
  information for delivery), and document.  The document may have a
  header and a body.

  For a personal letter the document body corresponds to the contents of
  the letter; the document header corresponds to the date line,
  greeting, and signature.

  For an inter-office memo the document body corresponds to the text;
  the document header corresponds to the header of the memo.

  The commands correspond to the information used by the Post Office or
  the mail room to route the letter or memo.  Some of the information in
  the command is supplied by the UIP.

2.2.  Assumptions



  The following assumptions are made about the internetwork environment:

  In general, it is not known what format intranet addresses will
  assume.  Since no standard addressing scheme would suit all networks,
  it is safe to assume there will be several and that they will change
  with time.  Thus, frequent software modification throughout all
  internet MPMs would be required if such MPMs were to know about the
  formats on many networks.  Therefore, each MPM which handles internet
  messages is required to know only the minimum necessary to deliver
  them.

  Each MPM is required to know completely only the addressing format of
  its own network(s).  In addition, the MPM must be able to select an
  output link for each message addressed to another network or host.
  This does not preclude more intelligent behavior on the part of a
  given MPM, but at least this minimum is necessary.  Each network has a
  unique name and numeric address.  Such names and addresses are



Postel                                                          [Page 5]


                                                             August 1980
Internet Message Protocol
Functional Description



  registered with a naming authority and may be listed in documents such
  as Assigned Numbers [4].

  Each MPM will have a unique internet address.  This feature will
  enable every MPM to place a unique "handling-stamp" on a message which
  passes through the MPM enroute to delivery.

2.3.  General Specification



  There are several aspects to a distributed service to be specified.
  First, there is the service to be provided; that is, the
  characteristics of the service as seen by its users.  Second, there is
  the service it uses; that is, the characteristics it assumes to be
  provided by some lower level service.  And third, there is the
  protocol used between the modules of the distributed service.

       User                                          User      
          \                                          /          
          UIP                                      UIP          
            \                                      /            
         --+----------------------------------------+-- Service
           |   \                                /   | Interface
           |  +--------+                +--------+  |          
           |  | Module | <--Protocol--> | Module |  |          
           |  +--------+                +--------+  |          
           |        \                       /       |          
           |        +-----------------------+       |          
           |        | Communication Service |       |          
           |        +-----------------------+       |          
           |                                        |          
           +----------------------------------------+          

                            Message Service

                               Figure 1.

  The User/Message Service Interface

    The service the message delivery system provides is to accept
    messages conforming to a specified format, to attempt to deliver
    those messages, and to report on the success or failure of the
    delivery attempt.  This service is provided in the context of an
    interconnected system of networks and may involve relaying a message
    through several intermediate MPMs via different communication
    services.




[Page 6]                                                          Postel


August 1980                                                            
                                               Internet Message Protocol
                                                  Functional Description



  The Message/Communication Service Interface

    The message delivery system calls on a communication service to
    transfer information from one MPM to another.  There may be
    different communication services used between different pairs of
    MPMs, though all communication services must meet the service
    characteristics described below.

    It is assumed that the communication service provides a reliable
    two-way data stream.  Such a data stream can usually be obtained in
    computer networks from the transport level protocol, for example,
    the Transmission Control Protocol (TCP) [3].  In any case, the
    properties the communication service must provide are:

      o  Logical connections for two way simultaneous data flow of
         arbitrary data (i.e., no forbidden codes).  All data sent is
         delivered in order.

      o  Simple commands to open and close the connections, and to send
         and receive data on the connections.

      o  Controlled flow of data so that data is not transmitted faster
         that the receiver chooses to consume it (on the average).

      o  Transmission errors are corrected without user notification or
         involvement of the sender or receiver.  Complete breakdown on
         communication is reported to the sender or receiver.

  The Message-Message Protocol

    The protocol used between the distributed modules of the message
    delivery system, that is, the MPMs, is a small set of commands which
    convey requests and replies.  These commands are encoded in a highly
    structured and rigidly specified format.

2.4.  Mechanisms



  MPMs are processes which use some communication service.  A pair of
  MPMs which can communicate reside in a common interprocess
  communication environment.  An MPM might exist in two (or more)
  interprocess communication environments, and such an MPM might act to
  relay messages between MPMs.  Messages may be held for a time in an
  MPM; the total path required for delivery need not be available
  simultaneously.

  From the time a message is accepted from a UIP by an MPM until it is
  delivered to a UIP by an MPM and an acknowledgment is returned to the


Postel                                                          [Page 7]


                                                             August 1980
Internet Message Protocol
Functional Description



  originating UIP, the message is considered to be active in the message
  system.

     User                                                    User
       \                                                      /  
       UIP                                                  UIP  
         \                                                  /    
      +---------------------------------------------------------+
      |    \                                              /     |
      |  +-----+                +-----+                +-----+  |
      |  | MPM | <--Protocol--> | MPM | <--Protocol--> | MPM |  |
      |  +-----+                +-----+                +-----+  |
      |     |                    /   \                    |     |
      |  +-----------------------+   +-----------------------+  |
      |  |Communication Service A|   |Communication Service B|  |
      |  +-----------------------+   +-----------------------+  |
      |                                                         |
      +---------------------------------------------------------+

                 Message Service with Internal Relaying

                               Figure 2.

  It should be clear that there are two roles an MPM can play, an
  end-point MPM or a relay MPM.  Most MPMs will play both roles.  A
  relay MPM acts to relay messages from one communication environment to
  another.  An end-point MPM acts as a source or destination of
  messages.

  The transfer of data between UIPs and MPMs is viewed as the exchange
  of data structures which encode messages.  The transfer of data
  between MPMs is also in terms of the transmission of structured data.

















[Page 8]                                                          Postel


August 1980                                                            
                                               Internet Message Protocol
                                                  Functional Description



                    +-----+     DATA       +-----+        
             USER-->| UIP |-->STRUCTURES-->| MPM |-->other
                    +-----+    +-----+     +-----+    MPMs
                               |     |                    
                               |  +-----+                  
                               +--|     |                  
                                  |  +-----+              
                                  +--|     |              
                                     |     |              
                                     +-----+              

                     +-----+     DATA       +-----+        
             other-->| MPM |-->STRUCTURES-->| UIP |-->USER
             MPMs    +-----+    +-----+     +-----+        
                                |     |                    
                                |  +-----+                
                                +--|     |                
                                   |  +-----+              
                                   +--|     |              
                                      |     |              
                                      +-----+              

                              Message Flow

                               Figure 3.

  In the following, a message will be described as a structured data
  object represented in a particular kind of typed data elements.  This
  is how a message is presented when transmitted between MPMs or
  exchanged between an MPM and a UIP.  Internal to an MPM (or a UIP), a
  message may be represented in any convenient form.


















Postel                                                          [Page 9]


                                                             August 1980
Internet Message Protocol
Functional Description



2.5.  Relation to Other Protocols



  This protocol the benefited from the earlier work on message protocols
  in the ARPA Network [5,6,7,8,9], and the ideas of others about the
  design of computer message systems
  [10,11,12,13,14,15,16,17,18,19,20,21].

  Figure 4 illustrates the place of the message protocol in the ARPA
  internet protocol hierarchy:

                                    
   +------+ +-----+ +-------+ +-----+     +-----+                  
   |Telnet| | FTP | |Message| |Voice| ... |     | Application Level
   +------+ +-----+ +-------+ +-----+     +-----+                  
           \   |   /             |           |                      
            +-----+           +-----+     +-----+                  
            | TCP |           | RTP | ... |     | Host Level        
            +-----+           +-----+     +-----+                  
               |                 |           |                      
              +-------------------------------+                    
              |       Internet Protocol       |   Gateway Level    
              +-------------------------------+                    
                              |                                    
                +---------------------------+                      
                |   Local Network Protocol  |     Network Level    
                +---------------------------+                      
                              |                                    



                         Protocol Relationships

                               Figure 4.

  Note that "local network" means an individual or specific network.
  For example, the ARPANET is a local network.

  The message protocol interfaces on one side to user interface programs
  and on the other side to a reliable transport protocol such as TCP.

  In this internet message system the MPMs communicate directly using
  the lower level transport protocol.  In the old ARPANET system,
  message transmission was part of the file transfer protocol.






[Page 10]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                  Functional Description



                                    
        +------+   +-----+   +-------+                              
        |Telnet|   | FTP |---|Message|            Application Level
        +------+   +-----+   +-------+                              
              \     /                                              
    +-----+   +-----+                                              
    |Voice|---| NCP |                             Host Level        
    +-----+   +-----+                                              
                 |                                                  
                 |                                                  
                 |                                Gateway Level    
                 |                                                  
                 |                                                  
         +----------------+                                        
         |    ARPA NET    |                       Network Level    
         +----------------+                                        
                                                                    



                         Old ARPANET Protocols

                               Figure 5.

  Note that in the old ARPANET protocols one can't send messages (or
  communicate in any way) to other networks since it has no gateway
  level or internet protocol [5].

  




















Postel                                                         [Page 11]


                                                             August 1980
Internet Message Protocol





















































[Page 12]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                       3.  DETAILED SPECIFICATION



The presentation of the information in this section is difficult since
everything depends on everything, and since this is a linear medium it
has to come in some order.  In this attempt, a brief overview of the
message structure is given, the detail of the message is presented in
terms of data objects, the various data objects are defined, and finally
the representation of the data elements is specified.  Several aspects
of the message structure are based on the NSW Transaction Protocol [22],
and similar (but more general) proposals [23,24].

3.1.  Overview of Message Structure



  A message is normally composed of three parts:  the identification,
  the command, and the document.  Each part is in turn composed of data
  objects.

  The identification part is composed of a transaction number assigned
  by the originating MPM and the MPM identifier.

  The command part is composed of an operation type, an operation code,
  the arguments to the operation, error information, the destination
  mailbox, and a trace.  The trace is a list of the MPMs that have
  handled this message.

  The document part is a data structure.  The message delivery system
  does not depend on the contents of the document part.  A standard for
  the document part is defined in reference [25].

  The following sections define the representation of a message as a
  structured object composed of other objects.  Objects in turn are
  represented using a set of basic data elements.

  The basic data elements are defined in section 3.7.  In summary, these
  are exact forms for representing integers, strings, booleans, et
  cetera.  There are also two elements for building data structures:
  list and property list.  Lists are simple lists of elements, including
  lists.  Property lists are lists of pairs of elements, where the first
  element of each pair names the pair.  That is, a property list is a
  list of <name,value> pairs.  In general, when an object is composed of
  multiple instances of a simpler object it is represented as a list of
  the simpler objects.  When an object is composed of a variety of
  simpler objects it is represented as a property list of the simpler
  objects.  In most uses of the property list representation, the
  presence of <name,value> pairs in addition to those specifically
  required is permitted.




Postel                                                         [Page 13]


                                                             August 1980
Internet Message Protocol
Specification



3.2.  Message Structure



  An internet message is composed of two or three parts.  The first is
  the Identification which identifies the transaction; the second is the
  Command; and the optional third part is the Document.

  When shipped between two MPMs, a message will take the form of a
  property list, with the <name,value> pairs in this order.

    MESSAGE is:

      ( Identification, Command [, Document ] )

    It is convenient to batch several messages together, shipping them
    as a unit from one MPM to another.  Such a group of messages is
    called a message-bag.

    A message-bag will be a list of Messages; each Message is of the
    form described above.

      MESSAGE-BAG is:

        ( Message, Message, ... )

  The Identification

    This is the transaction identifier.  It is assigned by the
    originating MPM.  The identification is composed of the MPM
    identifier, and a transaction number unique in that context for this
    message.

  The Command

    The command is composed of a mailbox, an operation code, the
    arguments to that operation, some error information, and a trace of
    the route of this message.  The command is implemented by a property
    list which contains <name,value> pairs, where the names are used to
    identify the associated argument values.

  The Document

    The document portion of an internet message is optional and when
    present is a data structure as defined in [25].






[Page 14]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



3.3.  Identification



  Each message must have a unique identifier while it exists in the
  message delivery system.  This is provided by the combination of the
  unique identifier of the MPM and a unique transaction number chosen
  for the message by this MPM.

    IDENTIFICATION is:

      ( mpm-identifier, transaction-number )

  The mpm-identifier is based on the host address of the computer in
  which the MPM resides.  If there is more than one MPM in a host the
  mpm-identifier must be extended to distinguish between the co-resident
  MPMs.

3.4.  Command



  This section describes the commands MPMs use to communicate between
  themselves.  The commands come in pairs, with each request having a
  corresponding reply.

    COMMAND is:

      ( mailbox, operation, [arguments,]
                                    [error-class, error-string,] trace )

  The mailbox is the "To" specification of the message.  Mailbox is a
  property list of general information, some of which is the essential
  information for delivery, and some of which could be extra information
  which may be helpful for delivery.  Mailbox is different from address
  in that address is a very specific property list without extra
  information.  The mailbox includes a specification of the user,  when
  a command is addressed to the MPM itself (rather than a user it
  serves) the special user name "*MPM*" is specified.

  The operation is the name of the operation or procedure to be
  performed.

  The arguments to the operation vary from operation to operation.

  The error information is composed of a error class code and a
  character string, and indicates what, if any, error occurred.  The
  error information is normally present only in replies, and not present
  in requests.




Postel                                                         [Page 15]


                                                             August 1980
Internet Message Protocol
Specification



  The trace is a list of the MPMs that have handled the message.  Each
  MPM must add its handling-stamp to the list.















































[Page 16]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  3.4.1.  Command:  DELIVER



    function:  Sends a document to a mailbox.

    reply:  The reply is ACKNOWLEDGE.

    arguments:

      type-of-service:  one or more of the following:

        "REGULAR"  regular delivery
        "FORWARD"  message forwarding
        "GENDEL"   general delivery
        "PRIORITY" priority delivery

  3.4.2.  Command:  ACKNOWLEDGE



    function:  Reply to DELIVER.

    arguments:

      reference:  the identifier of the originating message.

      address:

        The address is the final mailbox the message was delivered to.
        This would be different from the original mailbox if the message
        was forwarded, and is limited to the essential information
        needed for delivery.

      type-of-service:  one of the following:

        "GENDEL"    message was accepted for general delivery
        "REGULAR"   message was accepted for normal delivery
        "PRIORITY"  message was accepted for priority delivery

      error-class:
      error-string:

        If the document was delivered successfully, the error
        information has class 0 and string "ok".  Otherwise, the error
        information has a non-zero class and the string would be one of
        "no such user", "no such host", "no such network", "address
        ambiguous", or a similar response.

      trail:   the trace from the DELIVER command.



Postel                                                         [Page 17]


                                                             August 1980
Internet Message Protocol
Specification



  3.4.3.  Command:  PROBE



    function:  Finds out if specified mailbox (specified in mailbox of
    the command) exists at a host.

    reply:  The reply is RESPONSE.

    arguments:  none.

  3.4.4.  Command:  RESPONSE



    function:  Reply to PROBE.

    arguments:

      reference:  the identification of the originating PROBE.

      address:  a specific address.

      error-class:
      error-string:

        If the mailbox was found the error class is 0 and the error
        string is "OK".  If the mailbox has moved and a forwarding
        address in known the error class is 1 and the error string is
        "Mailbox moved, see address".  Otherwise the error class is
        greater than 1 and the error string may be one of the following:
        "Mailbox doesn't exist", "Mailbox full", "Mailbox has moved, try
        the new location indicated in the address".

      trail:  the trace which came from the originating PROBE.


















[Page 18]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  3.4.5.  Command:  CANCEL



    function:  Abort request for specified transaction.

    reply:  The reply is CANCELED.

    arguments:

      reference:  identification of transaction to be canceled.

  3.4.6.  Command:  CANCELED



    function:  Reply to CANCEL.

    arguments:

      reference:  identification of canceled transaction.

      error-class:
      error-string:

        If the command was canceled the error class is 0 and the error
        string is "OK".  Otherwise the error class is positive and the
        error string may be one of the following: "No such transaction",
        or any error for an unreachable mailbox.

      trail:  the trace of the CANCEL command.

  To summarize again, a command generally consists of a property list of
  the following objects:

    name            value
    ----            -----
    mailbox         property list of address information
    operation       name of operation
    arguments       ---
    error-class     numeric class of the error
    error-string    text description of the error
    trace           list ( handling-stamp, ... )

3.5.  Document



  The actual document follows the command.  The message delivery system
  does not depend on the document, examine it, or use it in any way.
  The standard for the contents of the document is reference [25].  The
  document must be the last <name,value> pair in the message property
  list.


Postel                                                         [Page 19]


                                                             August 1980
Internet Message Protocol
Specification



3.6.  Message Objects



  In the composition of messages, we use a set of objects such as
  mailbox or date.  These objects are encoded in basic data elements.
  Some objects are simple things like integers or character strings,
  other objects are more complex things built up of lists or property
  lists.

  The following is a list of the objects used in messages.  The object
  descriptions are in alphabetical order.

  Action

    The type of handling action taken by the MPM when processing a
    message.  One of ORIGIN, RELAY, FORWARD, or DESTINATION.

  Address

    Address is intended to contain the minimum information necessary to
    deliver a message, and no more (compare with mailbox).

      An address is a property list.  An address contains the following
      <name,value> pairs:

        name    description
        ----    -----------
        NET     network name
        HOST    host name
        USER    user name

      or:

        name    description
        ----    -----------
        MPM     mpm-identifier
        USER    user name

  Answer

    A yes (true) or no (false) answer to a question.

  Arguments

    Many operations require arguments, which differ from command to
    command.  This "object" is a place holder for the actual arguments
    when commands are described in a general way.



[Page 20]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  City

    The character string name of a city.

  Command

    (mailbox, operation [ ,arguments ]
                                  [ ,error-class, error-string ], trace)

  Country

    The character string name of a country.

  Date

    The date and time are represented according to the International
    Standards Organization (ISO) recommendations [26,27,28].  Taken
    together the ISO recommendations 2014, 3307, and 4031 result in the
    following representation of the date and time:

      yyyy-mm-dd-hh:mm:ss,fff+hh:mm

    Where yyyy is the four-digit year, mm is the two-digit month, dd is
    the two-digit day, hh is the two-digit hour in 24 hour time, mm is
    the two-digit minute, ss is the two-digit second, and fff is the
    decimal fraction of the second.  To this basic date and time is
    appended the offset from Greenwich as plus or minus hh hours and mm
    minutes.

    The time is local time and the offset is the difference between
    local time and Coordinated Universal Time (UTC).  To convert from
    local time to UTC algebraically subtract the offset from the local
    time.

    For example, when the time in
              Los Angeles is  14:25:00-08:00
              the UTC is      22:25:00

    or when the time in
              Paris is        11:43:00+01:00
              the UTC is      10:43:00

  Document

    The document is the user's composition and is not used by the
    message delivery system in any way.



Postel                                                         [Page 21]


                                                             August 1980
Internet Message Protocol
Specification



  Error-Class

    A numeric code for the class of the error.  The error classes are
    coded as follows:

      = 0: indicates success, no error.
        This is the normal case.
      = 1: failure, address changed.
        This error is used when forwarding is possible, but not allowed
        by the type of service specified.
      = 2: failure, resources unavailable.
        These errors are temporary and the command they respond to may
        work if attempted at a later time.
      = 3: failure, user error.
        For example, unknown operation, or bad arguments.
      = 4: failure, MPM error.  Recoverable.
        These errors are temporary and the command they respond to may
        work if attempted at a later time.
      = 5: failure, MPM error.  Permanent.
        These errors are permanent, there is no point in trying the same
        command again.
      = 6: Aborted as requested by user.
        The response to a successfully canceled command.


























[Page 22]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  Error-String

    This is a character string describing the error.  Possible errors:

              error-string                  error-class

      No errors                                  0
      Ok                                         0
      Mailbox Moved, see address                 1
      Mailbox Full, try again later              2
      Syntax error, operation unrecognized       3
      Syntax error, in arguments                 3
      No Such User                               3
      No Such Host                               3
      No Such Network                            3
      No Such Transaction                        3
      Mailbox Does Not Exist                     3
      Ambiguous Address                          3
      Server error, try again later              4
      No service available                       5
      Command not implemented                    5
      Aborted as requested by user               6

  Handling-Stamp

    The handling-stamp indicates the MPM, the date (including the time)
    that a message was processed by an MPM, and the type of handling
    action taken.

    ( mpm-identifier, date, action )

  Host

    The character string name of a host.

  Identification

    This is the transaction identifier associated with a particular
    message.  It is the transaction number, and the MPM identifier of
    the originating MPM.

    ( mpm-identifier, transaction-number )







Postel                                                         [Page 23]


                                                             August 1980
Internet Message Protocol
Specification



  Internet Address

    This identifies a host in the ARPA internetwork environment.  When
    used as a part of identification, it identifies the originating host
    of a message.  The internet address is a 32 bit number, the higher
    order 8 bits identify the network, and the lower order 24 bits
    identify the host on that network [2].  For use in the MPMs the
    internet address is divided into eight bit fields and the value of
    each field is represented in decimal digits.  For example, the
    ARPANET address of ISIE is 167837748 and is represented as
    10,1,0,52.  Further, this representation may be extended to include
    an address within a host, such as the TCP port of the MPM, for
    example, 10,1,0,52,0,45.

  Mailbox

    This is the destination address of a user of the internetwork mail
    system.  Mailbox contains information such as network, host,
    location, and local user indentifier of the recipient of the
    message.  Some information contained in mailbox may not be necessary
    for delivery.

    As an example, when one sends a message to someone for the first
    time, he may include many items which are not necessary simply to
    insure delivery.  However, once he gets a reply to this message, the
    reply will contain an Address (as opposed to Mailbox) which may be
    used from then on.

      A mailbox is a property list.  A mailbox might contain the
      following <name,value> pairs:

        name    description
        ----    -----------
        MPM     mpm-identifier
        NET     network name
        HOST    host name
        PORT    address of MPM within the host
        USER    user name
        ORG     organization name
        CITY    city
        STATE   state
        COUNTRY country
        ZIP     zip code
        PHONE   phone number

    The minimum mail box is an Address.



[Page 24]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  MPM-Identifier

    The internetwork address of the MPM.  This may be the ARPA Internet
    Address or an X.121 Public Data Network Address [29].  The
    mpm-identifier is a property list which has one <name,value> pair.
    This unusual structure is used so that it will be easy to determine
    the type of address used.

  Network

    This character string name of a network.

  Operation

    This names the operation or procedure to be performed.  It is a
    character string name.

  Organization

    This character string name of a organization.

  Phone

    This character string name representation of a phone number. For
    example the phone number of ISI is 1 (international region) + 213
    (area code) + 822 (central office) + 1511 (station number) =
    12138221511.

  Port

    This names the port or subaddress within a host of the MPM.  The
    default port for the MPM is 45 (55 octal) [4].

  Reference

    The reference is an identification from an earlier message.

  State

    The character string name of a state.









Postel                                                         [Page 25]


                                                             August 1980
Internet Message Protocol
Specification



  Trace

    Each MPM that handles the message must add its handling-stamp to
    this list.  This will allow detection of messages being sent in a
    loop within the internet mail system, and aid in fault isolation.

  Trail

    When a message is sent through the internetwork environment, it
    acquires this trace, a list of MPMs that have handled the message.
    This list is then carried as the trail in a reply or acknowledgment
    of that message.  Requests and replies always have a trace and each
    MPM adds its handling-stamp to this trace.  Replies, in addition,
    have a trail which is the complete trace of the original message.

  Transaction Number

    This is a number which is uniquely associated with this transaction
    by the originating MPM.  It identifies the transaction.  (A
    transaction is a message and acknowledgment.)  A transaction number
    must be unique during the time which the message (a request or
    reply) containing it could be active in the network.

  Type-of-Service

    A service parameter for the delivery of a message, for instance a
    message could be delivered (REGULAR), forwarded (FORWARD), turned
    over to general delivery (GENDEL) (i.e., allow a person to decide
    how to further attempt to deliver the message), or require priority
    handling (PRIORITY).

  User

    The character string name of a user.

  X121 Address

    This identifies a host in the Public Data Network environment.  When
    used as a part of identifier, it identifies the originating host of
    a message.  The X121 address is a sequence of up to 14 digits [29].
    For use in the MPMs the X121 address is represented in decimal
    digits.







[Page 26]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  Zip Code

    The character string representation of a postal zip code.  The zip
    code of ISI is 90291.

3.7.  Data Elements



  The data elements defined here are similar to the data structure and
  encoding used in NSW [30].

  Each of the diagrams which follow represent a sequence of octets.
  Field boundaries are denoted by the "|" character, octet boundaries by
  the "+" character.  Each element begins with a one-octet code.  The
  order of the information in each element is left-to-right.  In fields
  with numeric values the high-order (or most significant) bit is the
  left-most bit.  For transmission purposes, the leftmost octet is
  transmitted first.  Cohen has described some of the difficulties in
  mapping memory order to transmission order [31].

  
  Code  Type          Representation
  ----  ----          --------------

  
                      +------+
    0  No Operation   |  0   |
                      +------+

  
                      +------+------+------+------+------
    1  Padding        |  1   |     octet count    | Data ...
                      +------+------+------+------+------

  
                      +------+------+
    2  Boolean        |  2   | 1/0  |
                      +------+------+

  
                      +------+------+------+
    3  Index          |  3   |     Data    |
                      +------+------+------+

  
                      +------+------+------+------+------+
    4  Integer        |  4   |            Data           |
                      +------+------+------+------+------+


Postel                                                         [Page 27]


                                                             August 1980
Internet Message Protocol
Specification



  
       Extended       +------+------+------+------+------
    5  Precision      |  5   |    octet count     | Data ...
       Integer        +------+------+------+------+------

  
                      +------+------+------+------+------
    6  Bit String     |  6   |      bit count     | Data ...
                      +------+------+------+------+------

  
                      +------+------+------
    7  Name String    |  7   | count|  Data ...
                      +------+------+------

  
                      +------+------+------+------+------
    8  Text String    |  8   |     octet count    |  Data ...
                      +------+------+------+------+------

  
                      +------+------+------+------+-----
    9  List           |  9   |     octet count    | Data ...
                      +------+------+------+------+-----

  
                      +------+------+------+------+------
    10 Proplist       |  10  |     octet count    | Data ...
                      +------+------+------+------+------

  
                      +------+
    11 End of List    |  11  |
                      +------+

  Element code 0 (NOP) is an empty data element used for padding when it
  is necessary.  It is ignored.

  Element code 1 (PAD) is used to transmit large amounts of data with a
  message for test or padding purposes.  The type-octet is followed by a
  three-octet count of the number of octets to follow.  No action is
  taken with this data but the count of dummy octets must be correct to
  indicate the next element code.

  Element code 2 (BOOLEAN) is a boolean data element.  The octet
  following the type-octet has the value 1 for True and 0 for False.



[Page 28]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  Element code 3 (INDEX) is a 16-bit unsigned integer datum.  Element
  code 3 occupies only 3 octets.

  Element code 4 (INTEGER) is a signed 32-bit integer datum.  This will
  always occupy five octets.  Representation is two's complement.

  Element code 5 (EPI) is an extended precision integer.  The type octet
  is followed by a three-octet count of the number of data octets to
  follow.  Representation is two's complement.

  Element code 6 (BITSTR) is a bit string element for binary data.  The
  bit string is padded on the right with zeros to fill out the last
  octet if the bit string does not end on an octet boundary.  This data
  type must have the bit-count in the three-octet count field instead of
  the number of octets.

  Element code 7 (NAME) is used for the representation of character
  string names (or other short strings).  The type octet is followed by
  a one-octet count of the number of characters (one per octet) to
  follow.  Seven bit ASCII characters are used, right justified in the
  octet.  The high order bit in the octet is zero.

  Element code 8 (TEXT) is used for the representation of text.  The
  type octet is followed by a three-octet count of the number of
  characters (one per octet) to follow.  Seven bit ASCII characters are
  used, right justified in the octet.  The high order bit in the octet
  is zero.

  Element code 9 (LIST) can be used to create structures composed of
  other elements.  The three-octet octet count specifies the number of
  octets in the whole list (i.e., the number of octets following this
  count field to the end of the list, not including the ENDLIST octet).
  The two-octet item count contains the number of elements which follow.
  Any element may be used including list itself.

    
    +------+------+------+------+------+------+
    |   9  |     octet count    |  item count |
    +------+------+------+------+------+------+
                                     +------+------/---+
                          repeated   |      element    |
                                     +------+------/---+
                                                     +-------+
                                                     |ENDLIST|
                                                     +-------+

  In some situations it may not be possible to know the length of a list


Postel                                                         [Page 29]


                                                             August 1980
Internet Message Protocol
Specification



  until the head of it has been transmitted.  To allow for this a
  special ENDLIST element is defined.  A list of undetermined length is
  transmitted with the octet count cleared to zero, and the item count
  cleared to zero.  A null or empty List, one with no elements, has an
  octet count of two (2) and an item count of zero (0).  The ENDLIST
  element always follows a LIST, even when the length is determined.

  Element code 10 (PROPLIST) is the Property List element.  It is a
  special case of the list element, in which the elements are in pairs
  and the first element of each pair is a name.  It has the following
  form:

    
    +------+------+------+------+------+
    |  10  |     octet count    | pair |
    +------+------+------+------+------+
                         +------+------/---+------+------/---+
              repeated   | name element    | value element   |
                         +------+------/---+------+------/---+
                                                           +-------+
                                                           |ENDLIST|
                                                           +-------+

  The Property List structure consists of a set of unordered
  <name,value> pairs.  The pairs are composed of a name which must be a
  NAME element and a value which may be any kind of element.  Following
  the type code is a three-octet octet count of the following octets.
  Following the octet count is a one-octet pair count of the number of
  <name,value> pairs in the property list.

  The name of a <name,value> pair is to be unique within the property
  list, that is, there shall be at most one occurrence of any particular
  name in one property list.

  In some situations it may not be possible to know the length of a
  property list until the head of it has been transmitted.  To allow for
  this the special ENDLIST element is defined.  A property list of
  undetermined length is transmitted with the octet count cleared to
  zero, and the pair count cleared to zero.  A null or empty property
  list, one with no elements, has an octet count of one (1) and an pair
  count of zero (0).  The ENDLIST element always follows a property
  list, even when the length is determined.

  Element code 11 (ENDLIST) is the end of list element.  It marks the
  end of the corresponding list or property list.




[Page 30]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



  Structure Sharing

    When messages are batched in message-bags for transmission, it may
    often be the case that the same document will be sent to more than
    one recipient.  Since the document portion can usually be expected
    to be the major part of the message, much repeated data would be
    sent if a copy of the document for each recipient were to be shipped
    in the message-bag.

    To avoid this redundancy, messages may be assembled in the
    message-bag so that actual data appears on its first occurrence and
    only references to it appear in later occurrences.  When data is
    shared, the first occurrence of the data will be tagged, and later
    locations where the data should appear will only reference the
    earlier tagged location.  All references to copied data point to
    earlier locations in the message-bag.  The data to be retrieved is
    indicated by the tag.

    This is a very general sharing mechanism.  PLEASE NOTE THAT THE MPM
    WILL NOT SUPPORT THE FULL USE OF THIS MECHANISM.  THE MPM WILL ONLY
    SUPPORT SHARING OF WHOLE DOCUMENTS.  No other level of sharing will
    be supported by the MPMs.

    This sharing mechanism may be used within a document as long as all
    references refer to tags within the same document.

    Sharing is implemented by placing a share-tag on the first
    occurrence of the data to be shared, and placing a share-reference
    at the locations where copies of that data should occur.

    
                           +------+------+------+
      12 Share Tag         |  12  | share-index |
                           +------+------+------+

    
                           +------+------+------+
      13 Share Reference   |  13  | share-index |
                           +------+------+------+

    Element code 12 (S-TAG) is a share tag element.  The two octets
    following the type-octet specify the shared data identification code
    for the following data element.  Note that s-tag is not a DATA
    element, in the sense that data elements encode higher level
    objects.

    Element code 13 (S-REF) is a share reference element.  The two


Postel                                                         [Page 31]


                                                             August 1980
Internet Message Protocol
Specification



    octets following the type-octet specify the referenced shared data
    identification code.

    An example of using this mechanism is

      ( ( <a>, <b> ) ( <c>, <b> ) )

    could be coded as follows to share <b>

      ( ( <a>, <s-tag-1><b> ) ( <c>, <s-ref-1> ) )

    To facilitate working with structures which may contain shared data,
    the two high-order bits of the list and property list element codes
    are reserved for indicating if the structure contains data to be
    shared or contains a reference to shared data.  That is, if the
    high-order bit of the list or property list element code octet is
    set to one then the property list contains a share-reference to
    shared data.  Or, if the second high-order bit is set to one the
    structure contains a share-tag for data to be shared.

    The example above is now repeated in detail showing the use of the
    high-order bits.

    
    +------+------+------+------+------+------+------+------+
    |11 - 9|01 - 9|  <a> |  12  |   0  |   1  |  <b> |  11  |
    +------+------+------+------+------+------+------+------+
                      +------+------+------+------+------+------+------+
                      |10 - 9|  <c> |  13  |   0  |   1  |  11  |  11  |
                      +------+------+------+------+------+------+------+

    It is not considered an error for an element to be tagged but not
    referenced.

    A substructure with internal sharing may be created.  If such a
    substructure is closed with respect to sharing -- that is, all
    references to its tagged elements are within the substructure --
    then there is no need for the knowledge of the sharing to propagate
    up the hierarchy of lists.  For example, if the substructure is:

      00-LIST ( a b c b )

    which with sharing is:

      11-LIST ( a T1:b c R1 )

    When this substructure is included in a large structure the high


[Page 32]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                           Specification



    order bits can be reset since the substructure is closed with
    respect to sharing.  For example:

      00-LIST ( x 11-LIST ( a T1:b c R1 ) y )

    Note:  While sharing adds transmission and memory efficiency, it is
    costly in processing to separate shared elements.  This is the main
    reason for restricting the sharing supported by the MPM.  At some
    later time these restrictions may be eased.

    It is possible to create loops, "strange loops" and "tangled
    hierarchies" using this mechanism [32].  The MPM will not check for
    such improper structures within documents, and will not deliver
    messages involved in such structures between documents.

    If an encryption scheme is used to ensure the privacy of
    communication it is unlikely that any parts of the message can be
    shared.  This is due to the fact that in most case the encryption
    keys will be specific between two individuals.  There may be a few
    cases where encrypted data may be shared.  For example, all the
    members of a committee may use a common key when acting on committee
    business, or in a public key scheme a document may be "signed" using
    the private key of the sender and inspected by anyone using the
    public key of the sender.

    























Postel                                                         [Page 33]


                                                             August 1980
Internet Message Protocol





















































[Page 34]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                            4.  OTHER ISSUES



This section discusses various other issues that need to be dealt with
in a computer message system.

4.1.  Accounting and Billing



  Accounting and billing must be performed by the MPM.  The charge to
  the user by the message delivery system must be predictable, and so
  cannot depend on the actual cost of sending a particular message which
  incurs random delays, handling and temporary storage charges.  Rather,
  these costs must be aggregated and charged back to the users on an
  average cost basis.  The user of the service may be charged based on
  the destination or distance, the length of the message, type of
  service, or other parameters selected as the message is entered into
  the delivery system, but must not depend on essentially random
  handling by the system of the particular message.

  This means it is pointless to have each message carry an accumulated
  charge (or list of charges).  Rather, the MPM will keep a log of
  messages handled and periodically bill the originators of those
  messages.

  It seems that the most reasonable scheme is to follow the practice of
  the international telephone authorities.  In such schemes the
  authority where the message originates bills the user of the service
  for the total charge.  The authorities assist each other in providing
  the international message transfer and the authorities periodically
  settle any differences in accounts due to an imbalance in
  international traffic.

  Thus the MPMs will keep logs of messages handled and will periodically
  charge their neighboring MPM for messages handled for them.  This
  settlement procedure is outside the message system and between the
  administrators of the MPMs.

  As traffic grows it will be impractical to log every message
  individually.  It will be necessary to establish categories of
  messages (e.g., short, medium, large) and only count the number in
  each category.

  The MPM at the source of the message will have a local means of
  identifying the user to charge for the message delivery service.  The
  relay and destination MPMs will know which neighbor MPMs to charge (or
  settle with) for delivery of their messages.





Postel                                                         [Page 35]


                                                             August 1980
Internet Message Protocol
Other Issues



4.2.  Addressing and Routing



  The mailbox provides for many types of address information.  The MPMs
  in the ARPA internet can most effectively use the internet address
  [2].  The use of other address information is not yet very clear.
  Some thoughts on addressing issues may be found in the references
  [33,34,35].

  An MPM sometimes must make a routing decision when it is acting as a
  relay-MPM (or source MPM).  It must be able to use the information
  from the mailbox to determine to which of its neighbor MPMs to send
  the message.  One way this might be implemented is to have a table of
  destination networks with corresponding neighbor MPM identifiers to
  use for routing toward that network.

  It is not expected that such routing tables would be very dynamic.
  Changes would occur only when new MPMs came into existence or MPMs
  went out of service for periods of days.

  Even with relatively slowly changing routing information the MPMs need
  an automatic mechanism for adjusting their routing tables.  The
  routing problem here is quite similar to the problem of routing in a
  network of packet switches such as the ARPANET IMPs or a set of
  internet gateways.  A great deal of work has been done on such
  problems and many simple schemes have been found faulty.  There are
  details of these procedures which may become troublesome when the
  number of nodes grows beyond a certain point or the frequency of
  update exchanges gets large.

  A basic routing scheme is to have a table of <network-name,
  mpm-identifier> pairs.  The MPM could look up the network name found
  in the mailbox of the message and determine the internet
  mpm-identifier of the next MPM to which to route the message.  To
  permit automatic routing updates another column would be added to
  indicate the distance to the destination.  This could be measured in
  several ways, for example, the number of relay MPM (or hops) to the
  final destination.  In this case each entry in the table is a triple
  of <network-name, mpm-identifier, distance>.

  To update the routing information when changes occur an MPM updates
  its table.  It then sends to each next MPM in its table a table of
  pairs <network-name, distance>, which say in effect "I can get a
  message to each of these networks with "cost" distance."  An MPM which
  receives such an update will add to all the distances the distance to
  the MPM sending the update (e.g., one hop) and compare the information
  with its own table.



[Page 36]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                            Other Issues



  If the update information shows that the distance to a destination
  network is now smaller via the MPM which sent the update, the MPM
  changes its own table to reflect the better route, and the new
  distance.  If the MPM has made changes in its table it sends update
  information to all the MPMs listed as next-MPMs in its table.

  One further feature is that when a new network comes into existence an
  entry must be added to the table in each MPM.  The MPMs should
  therefore expect the case that update information may contain entries
  which are new networks, and in such an event add these entries to
  their own tables.

  When a new MPM comes into existence it will have an initial table
  indicating that it is a good route (short distance) to the network it
  is in, and will have entries for a few neighbor networks.  It will
  send an initial "update" to those neighbor MPMs which will respond
  with more complete tables, thus informing the new MPM of routes to
  many networks.

  This routing update mechanism is a simple minded scheme and may have
  to be replaced as the system of MPMs grows.  In addition it ignores
  the opportunity for MPMs to use other information (besides destination
  network name) for routing.  MPMs may have tables that indicate
  next-MPMs based on city, telephone number, organization, or other
  categories of information.

4.3.  Encryption



  It is straightforward to add the capability to have the document
  portion of messages either wholly or partially encrypted.  An
  additional basic data element is defined to carry encrypted data.  The
  data within this element may be composed of other elements, but that
  could only be perceived after the data was decrypted.

  
                      +------+------+------+------+
    14 Encrypt        |  14  |     octet count    |
                      +------+------+------+------+
  
                             +------+------+------+-------
                             |alg id|   key id    | Data ...
                             +------+------+------+--------

  Element code 14 (ENCRYPT) is used to encapsulate encrypted data.  The
  format is the one-octet type code, the three-octet octet count, a
  one-octet algorithm identifier, a two-octet key identifier, and count
  octets of data.  Use of this element indicates that the data it


Postel                                                         [Page 37]


                                                             August 1980
Internet Message Protocol
Other Issues



  contains is encrypted.  The encryption scheme is indicated by the
  algorithm identifier, and the key used is indicated by the key
  identifier (this is not the key itself).  The NBS Data Encryption
  Standard (DES) [36], public key encryption [37,38,39], or other
  schemes may be used.

  To process this data element, the user is asked for the appropriate
  key and the data can then be decrypted.  The data thus revealed will
  be in the form of complete data element fields.  Encryption cannot
  occur over a partial field.  The revealed data is then processed
  normally.

  Note that there is no reason why all fields of a document could not be
  encrypted including all document header information such as From,
  Date, etc.

  
































[Page 38]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                 5.  THE MPM:  A POSSIBLE ARCHITECTURE



The heart of the internet message system is the MPM which is responsible
for routing and delivering messages.  Each network must have at least
one MPM.  These MPMs are logically connected together, and internet mail
is always transferred along logical channels between them.  The MPMs
interface with existing local message systems.

Since the local message system may be very different from the internet
system, special programs may be necessary to convert incoming internet
messages to the local format.  Likewise, messages outgoing to other
networks may be converted to the internet format and sent via the MPMs.

5.1.  Interfaces



  User Interface

    It is assumed that the interface between the MPM and the UIP
    provides for passing data structures which represent the document
    portion of the message.  In addition, this interface must pass the
    delivery address information (which becomes the information in the
    mailbox field of the command).  It is assumed that the information
    is passed between the UIP and the MPM via shared files, but this is
    not the only possible mechanism.  These two processes may be more
    strongly coupled (e.g., by sharing memory), or less strongly coupled
    (e.g., by communicating via logical channels).

    When a UIP passes a document and a destination address to the MPM,
    the MPM assigns a transaction-number and forms a message to send.
    The MPM must record the relationship between the transaction-number,
    the document, and the UIP, so that it can inform the UIP about the
    outcome of the delivery attempt for that document when the
    acknowledgment message is received at some later time.

    Assuming a file passing mode of communication between the UIP and
    the MPM the sending and receiving of mail might involve the
    following interactions:

      A user has an interactive session with a UIP to compose a document
      to send to a destination (or list of destinations).  When the user
      indicates to the UIP that the document is to be sent, the UIP
      places the information into a file for the MPM.  The UIP may then
      turn to the next request of the user.

      The MPM finds the file and extracts the the information.  It
      creates a message, assigning a transaction-number and forming a
      deliver command.  The MPM records the UIP associated with this
      message.  The MPM sends the message toward the destination.


Postel                                                         [Page 39]


                                                             August 1980
Internet Message Protocol
MPM Architecture



      When the MPM receives a deliver message from another MPM addressed
      to a user in its domain, it extracts the document and puts it into
      a file for the UIP associated with the destination user.  The MPM
      also sends an acknowledge message to the originating MPM.

      When the MPM receives an acknowledgment for a message it sent, the
      MPM creates a notification for the associated UIP and places it in
      a file for that UIP.

      The format of these files is up to each UIP/MPM interface pair.
      One reasonable choice is to use the same data structures used in
      the MPM-MPM communication.

  Communication Interface

    It is assumed here that the MPMs use an underlying communication
    system, and TCP [3] has been taken as the model.  In particular, the
    MPM is assumed to be listening for a TCP connection on a TCP port,
    i.e., it is a server process.  The port is either given explicitly
    in the mpm-identifier or takes the default vaule 45 (55 octal) [4].
    Again, this is not intended to limit the implementation choices;
    other forms of interprocess communication are allowed, and other
    types of physical interconnection are permitted.  One might even use
    dial telephone calls to interconnect MPMs (using suitable protocols
    to provide reliable communication) [12,19,20,21].

  

5.2.  The MPM Organization



  Messages in the internet mail system are transmitted in lists called
  message-bags (or simply bags), each bag containing one or more
  messages.  Each MPM is expected to implement functions which will
  allow it to deliver local messages it receives and to forward
  non-local ones to other MPMs presumably closer to the message's
  destination.

  Loosely, each MPM can be separated into six components:

    1--Acceptor

      Receives incoming message-bags, from other MPMs, from UIPs, or
      from conversion programs.

    2--Message-Bag Processor

      Splits a bag into these three portions:


[Page 40]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



        a.    Local Host Messages
        b.    Local Net Messages
        c.    Foreign Net Messages

    3--Local Host Delivery

      Delivers local host messages, may call on conversion program.

    4--Local Net Delivery

      Delivers local net messages, may call on conversion program.

    5--Foreign Net Router

      Forms message-bags for transmission to other MPMs and determines
      the first step in the route.

    6--Foreign Net Sender

      Activates transmission channels to other MPMs and sends
      message-bags to foreign MPMs.

  If the local net message system uses the protocol of the MPMs, then
  there need be no distinction between local net and foreign net
  delivery procedures.

  All of these components can be thought of as independent.  The
  function of the Acceptor is to await incoming message-bags and to
  insert them into the Bag-Input Queue.

  The Bag-Input queue is read by the message-bag Processor which will
  separate and deliver suitable portions of the message-bags it
  retrieves from the queue to one of three queues:

    a.    Local Host Queue
    b.    Local Net Queue
    c.    Foreign Net Queue

  When an MPM has a message to send to another MPM, it must add its own
  handling-stamp to the trace field of the command.  The trace then
  becomes a record of the route the message has taken.  An MPM should
  examine the trace field to see if the message is in a routing loop.
  All commands require the return of the trace as a trail in the
  matching reply command.

  All of these queues have as elements complete message-bags created by
  selecting messages from the input message-bags.



Postel                                                         [Page 41]


                                                             August 1980
Internet Message Protocol



  The Local Host queue serves as input to the Local Host Delivery
  process.  This component is responsible for delivering messages to its
  local host.  It may call on a conversion program to reformat the
  messages into a form the local protocol will accept.  This will
  probably involve such things as copying shared information.

  The Local Net queue serves as input to the Local Net Delivery process.
  This component is responsible for delivering messages to other hosts
  on its local net.  It must be capable of handling whatever error
  conditions the local net might return, and should include the ability
  to retransmit.  It may call on a conversion program to reformat the
  messages into a form the local protocol will accept.  This will
  probably involve such things as copying shared information.

  The other two processes are more closely coupled.  The Foreign Net
  Router takes its input bags from the Foreign Net Queue.  From the
  internal information it contains, it determines which of the MPMs to
  which it is connected should receive the bag.

  It then places the bag along with the routing information into the
  Send Mail Queue.  The Foreign Net Sender retrieves it from that queue
  and transmits it across a channel to the intended foreign MPM.  The
  Sender aggregates messages to the same next MPM into a bag.

  The Foreign Net Router should be capable of receiving external input
  to its routing information table.  This may come from the Foreign Net
  Sender in the case of a channel going down, requiring a decision to
  either postpone delivery or to determine a new route.  The Router is
  responsible for maintaining sufficient information to determine where
  to send any incoming message-bag.

  Forwarding

    An MPM may have available information on the correct mailboxes of
    users which are not at its location.  This information, called a
    forwarding data base, may be used to return the correct address in
    response to a probe command, or to actually forward a deliver
    command (if allowed by the type of service).

    Because such forwarding may cause the route of a message to pass
    through an MPM already on the trace of this message, only the
    portion of the trace back to the most recent forward action should
    be used for loop detection by a relay relaying MPM, and only the
    forward action entries in the trace should be checked by a
    forwarding MPM.





[Page 42]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



  Implementation Recommendations

    Transaction numbers can be assigned sequentially, with wrap around
    when the highest value is reached.  This should ensure that no
    message with a particular transaction number from this source is in
    the network when another instance of this transaction number is
    chosen.

    The processing to separate shared elements when the routes of the
    shared elements diverge while still preserving the sharing possible
    appears to be an O(N*M**2) operation where N is the number of
    distinct objects in a message which may be shared across message
    boundaries and M is the number of messages in the bag.

    Also note that share-tags may be copied into separate message bags
    which are not referenced.  These could be removed with another pass
    over the message bag.

    































Postel                                                         [Page 43]


                                                             August 1980
Internet Message Protocol





















































[Page 44]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                        6.  EXAMPLES & SCENARIOS



Example 1:  Message Format

  Suppose we want to send the following message:

    Date: 1979-03-29-11:46-08:00
    From: Jon Postel <Postel@ISIE>
    Subject: Meeting Thursday
    To: Danny Cohen <Cohen@USC-ISIB>
    CC: Linda
    
    Danny:
    
    Please mark your calendar for our meeting Thursday at 3 pm.
    
    --jon.

  It will be encoded in the structured format.  The following will
  present successive steps in the top down generation of this message.
  The actual document above will not be shown in the coded form.

  1.  message

  2.  (identification, command, document)

  3.  (ID:(mpm-identifier, transaction-number),
       CMD:(MAILBOX:mailbox, OPERATION:operation,
                                                arguments, TRACE:trace),
       DOC:<<document>>)

  4.  (ID:(mpm-identifier, transaction-number),
       CMD:(MAILBOX:mailbox, OPERATION:operation,
                                  TYPE-OF-SERVICE:regular, TRACE:trace),
       DOC:<<document>>)

  5.  (ID:(MPM:(IA:12,1,0,52,0,45), TRANSACTION:37),
       CMD:(MAILBOX:(MPM:(IA:12,3,0,52,0,45),
                     NET:ARPA,
                     HOST:ISIB,
                     PORT:45,
                     USER:Cohen),
            OPERATION:DELIVER,
            TYPE-OF-SERVICE:REGULAR,
            TRACE:(MPM:(IA:12,1,0,52,0,45)
                   DATE:1979-03-29-11:46-08:00,
                   ACTION:ORIGIN)),
       DOC:<<document>>)


Postel                                                         [Page 45]


                                                             August 1980
Internet Message Protocol
Examples & Scenarios



  6.  PROPLIST:(
        ID:PROPLIST:(
             MPM:PROPLIST:(
                   IA:12,1,0,52,0,45),
                 ENDLIST
             TRANSACTION:37)
           ENDLIST,

        CMD:PROPLIST(
             MAILBOX:(PROPLIST:(
                        MPM:PROPLIST(
                              IA:12,3,0,52,0,45),
                            ENDLIST
                        NET:ARPA,
                        HOST:ISIB,
                        PORT:45,
                        USER:Cohen ),
                      ENDLIST
             OPERATION:DELIVER,
             TYPE-OF-SERVICE:REGULAR,
             TRACE:(PROPLIST:MPM:
                       (PROPLIST:
                          IA:12,1,0,52,0,45)
                        ENDLIST
                      DATE:1979-03-29-11:46-08:00,
                      ACTION:ORIGIN)),
                    ENDLIST
          ENDLIST
        DOC:<<document>>)
      ENDLIST



















[Page 46]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                    Examples & Scenarios



Example 2:  Delivery and Acknowledgment

  The following are four views of the message of example 1 during the
  successive transmission from the origination MPM, through a relay MPM,
  to the destination MPM, and the return of the acknowledgment, through
  a relay MPM, to the originating MPM.

  +-----------------------------------------------------------------+
  |                          A         B                            |
  | sending --> originating --> relay --> destination --> receiving |
  |   user          MPM          MPM          MPM            user   |
  |                                                                 |
  |                          D         C                            |
  |             originating <-- relay <-- destination               |
  |                 MPM          MPM          MPM                   |
  +-----------------------------------------------------------------+

                           Transmission Path

                               Figure 6.





























Postel                                                         [Page 47]


                                                             August 1980
Internet Message Protocol
Examples & Scenarios



  A.  Between the originating MPM and the relay MPM.



    PROPLIST:
      NAME:"ID",
        PROPLIST:
          NAME:"MPM",
            PROPLIST:
              NAME:"IA", NAME:"10,1,0,52,0,45"
            ENDLIST
          NAME:"TRANSACTION", INTEGER:37
        ENDLIST
      NAME:"CMD",
        PROPLIST:
          NAME:"MAILBOX",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", NAME:"10,3,0,52,0,45"
                ENDLIST
              NAME:"NET", NAME:"ARPA"
              NAME:"HOST", NAME:"ISIB"
              NAME:"PORT", NAME:"45"
              NAME:"USER", NAME:"Cohen"
            ENDLIST
          NAME:"OPERATION", NAME:"DELIVER"
          NAME:"TYPE-OF-SERVICE", NAME:"REGULAR"
          NAME:"TRACE",
            LIST:
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,1,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:47.5-08:00"
                NAME:"ACTION", NAME:"ORIGIN"
              ENDLIST
            ENDLIST
        ENDLIST
      NAME:"DOC", <<document>>
    ENDLIST









[Page 48]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                    Examples & Scenarios



  B.  Between the relay MPM and the destination MPM.



    PROPLIST:
      NAME:"ID",
        PROPLIST:
          NAME:"MPM",
            PROPLIST:
              NAME:"IA", NAME:"10,1,0,52,0,45"
            ENDLIST
          NAME:"TRANSACTION", INTEGER:37
        ENDLIST
      NAME:"CMD",
        PROPLIST:
          NAME:"MAILBOX",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", NAME:"10,3,0,52,0,45"
                ENDLIST
              NAME:"NET", NAME:"ARPA"
              NAME:"HOST", NAME:"ISIB"
              NAME:"PORT", NAME:"45"
              NAME:"USER", NAME:"Cohen"
            ENDLIST
          NAME:"OPERATION", NAME:"DELIVER"
          NAME:"TYPE-OF-SERVICE", NAME:"REGULAR"
          NAME:"TRACE",
            LIST:
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,1,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:47.5-08:00"
                NAME:"ACTION", NAME:"ORIGIN"
              ENDLIST
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,2,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:48-08:00"
                NAME:"ACTION", NAME:"RELAY"
              ENDLIST
            ENDLIST
        ENDLIST
      NAME:"DOC", <<document>>


Postel                                                         [Page 49]


                                                             August 1980
Internet Message Protocol
Examples & Scenarios



    ENDLIST

  C.  Between the destination MPM and the relay MPM.



    PROPLIST:
      NAME:"ID",
        PROPLIST:
          NAME:"MPM",
            PROPLIST:
              NAME:"IA", NAME:"10,3,0,52,0,45"
            ENDLIST
          NAME:"TRANSACTION", INTEGER:1993
        ENDLIST
      NAME:"CMD",
        PROPLIST:
          NAME:"MAILBOX",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:"10,1,0,52,0,45"
                ENDLIST
              NAME:"NET", NAME:"ARPA"
              NAME:"HOST", NAME:"ISIE"
              NAME:"PORT", NAME:"45"
              NAME:"USER", NAME:"*MPM*"
            ENDLIST
          NAME:"OPERATION", NAME:"ACKNOWLEDGE"
          NAME:"REFERENCE",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", NAME:"10,1,0,52,0,45"
                ENDLIST
              NAME:"TRANSACTION", INTEGER:37
            ENDLIST
          NAME:"ADDRESS",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:"10,3,0,52,0,45"
                ENDLIST
              NAME:"USER", NAME:"Cohen"
            ENDLIST
          NAME:"TYPE-OF-SERVICE", NAME:"REGULAR"
          NAME:"ERROR-CLASS", INDEX:0
          NAME:"ERROR-STRING", NAME:"Ok"
          NAME:"TRAIL",


[Page 50]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                    Examples & Scenarios



            LIST:
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,1,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:47.5-08:00"
                NAME:"ACTION", NAME:"ORIGIN"
              ENDLIST
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,2,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:48-08:00"
                NAME:"ACTION", NAME:"RELAY"
              ENDLIST
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,3,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:51.567-08:00"
                NAME:"ACTION", NAME:"DESTINATION"
              ENDLIST
            ENDLIST
          NAME:"TRACE",
            LIST:
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,3,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:52-08:00"
                NAME:"ACTION", NAME:"ORIGIN"
              ENDLIST
            ENDLIST
        ENDLIST
    ENDLIST










Postel                                                         [Page 51]


                                                             August 1980
Internet Message Protocol
Examples & Scenarios



  D.  Between the relay MPM and the originating MPM.



    PROPLIST:
      NAME:"ID",
        PROPLIST:
          NAME:"MPM",
            PROPLIST:
              NAME:"IA", NAME:"10,3,0,52,0,45"
            ENDLIST
          NAME:"TRANSACTION", INTEGER:1993
        ENDLIST
      NAME:"CMD",
        PROPLIST:
          NAME:"MAILBOX",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:"10,1,0,52,0,45"
                ENDLIST
              NAME:"NET", NAME:"ARPA"
              NAME:"HOST", NAME:"ISIE"
              NAME:"PORT", NAME:"45"
              NAME:"USER", NAME:"*MPM*"
            ENDLIST
          NAME:"OPERATION", NAME:"ACKNOWLEDGE"
          NAME:"REFERENCE",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", NAME:"10,1,0,52,0,45"
                ENDLIST
              NAME:"TRANSACTION", INTEGER:37
            ENDLIST
          NAME:"ADDRESS",
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:"10,3,0,52,0,45"
                ENDLIST
              NAME:"USER", NAME:"Cohen"
            ENDLIST
          NAME:"TYPE-OF-SERVICE", NAME:"REGULAR"
          NAME:"ERROR-CLASS", INDEX:0
          NAME:"ERROR-STRING", NAME:"Ok"
          NAME:"TRAIL",
            LIST:
              PROPLIST:


[Page 52]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                    Examples & Scenarios



                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,1,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:47.5-08:00"
                NAME:"ACTION", NAME:"ORIGIN"
              ENDLIST
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,2,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:48-08:00"
                NAME:"ACTION", NAME:"RELAY"
              ENDLIST
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,3,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:51.567-08:00"
                NAME:"ACTION", NAME:"DESTINATION"
              ENDLIST
            ENDLIST
          NAME:"TRACE",
            LIST:
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,3,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:52-08:00"
                NAME:"ACTION", NAME:"ORIGIN"
              ENDLIST
              PROPLIST:
                NAME:"MPM",
                  PROPLIST:
                    NAME:"IA", NAME:"10,2,0,52,0,45"
                  ENDLIST
                NAME:"DATE", NAME:"1979-03-29-11:52.345-08:00"
                NAME:"ACTION", NAME:"RELAY"
              ENDLIST
            ENDLIST
        ENDLIST
    ENDLIST

  


Postel                                                         [Page 53]


                                                             August 1980
Internet Message Protocol





















































[Page 54]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                       7.  SPECIFICATION SUMMARY





7.1.  Message Fields



  All keywords used in this protocol are to be recognized independent of
  case.

  action: NAME (one of)
    "ORIGIN" | "RELAY" | "FORWARD" | "DESTINATION"

  address: PROPLIST (one of)

    NAME: "MPM", <mpm-identifier>
    NAME: "USER", <user>

      or

    NAME: "NET", <net>
    NAME: "HOST", <host>
    NAME: "PORT", <port>
    NAME: "USER", <user>

  answer: BOOLEAN

  city: NAME

  command: PROPLIST
    NAME: "MAILBOX", <mailbox>
    NAME: "OPERATION", <operation>
    <<arguments>>
    NAME: "ERROR-CLASS", <error-class>    (only in replies)
    NAME: "ERROR-STRING", <error-string>  (only in replies)
    NAME: "TRACE", <trace>

  country: NAME

  document: <<document>>

  error-class: INDEX

  error-string: NAME

  host: NAME





Postel                                                         [Page 55]


                                                             August 1980
Internet Message Protocol



  handling-stamp: PROPLIST
    NAME: "MPM", <mpm-identifier>
    NAME: "DATE", <date>
    NAME: "ACTION", <action>

  identification: LIST
    NAME: "MPM", <mpm-identifier>
    NAME: "TRANSACTION", <transaction-number>

  internet-address: NAME

  mailbox:  PROPLIST (some of)
    NAME: "MPM", <mpm-identifier>
    NAME: "NET", <net>
    NAME: "HOST", <host>
    NAME: "PORT", <port>
    NAME: "USER", <user>
    NAME: "ORG", <organization>
    NAME: "CITY", <city>
    NAME: "STATE", <state>
    NAME: "COUNTRY", <country>
    NAME: "ZIP", <zip-code>
    NAME: "PHONE", <phone-number>
    <<other-items>>

  message: PROPLIST
    NAME: "ID", <identification>
    NAME: "CMD", <command>
    NAME: "DOC", <document> (only in deliver)

  mpm-identifier: PROPLIST (one of)

    NAME: "IA", <internet-address>

      or

    NAME: "X121", <x121-address>

  net: NAME

  operation: NAME (one of)
      "DELIVER" | "ACKNOWLEDGE
    | "PROBE"   | "RESPONSE
    | "CANCEL"  | "CANCELED"

  organization: NAME

  phone-number: NAME


[Page 56]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



  port: NAME

  state: NAME

  trace: LIST
    <handling-stamp>
    ...

  trail: LIST
    <handling-stamp>
    ...

  transaction-number: INTEGER

  type-of-service: NAME (one or more of)
    "REGULAR" | "FORWARD" | "GENDEL" | "PRIORITY"

  user: NAME

  x121-address: NAME

  zip-code: NAME




























Postel                                                         [Page 57]


                                                             August 1980
Internet Message Protocol



7.2.  Deliver Message



  PROPLIST:
    NAME:"ID",
      PROPLIST:
        NAME:"MPM",
          PROPLIST:
            NAME:"IA", NAME:<internet-address>
          ENDLIST
        NAME:"TRANSACTION", INTEGER:<transaction-number>
      ENDLIST
    NAME:"CMD",
      PROPLIST:
        NAME:"MAILBOX",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"NET", NAME:<net>
            NAME:"HOST", NAME:<host>
            NAME:"PORT", NAME:<port>
            NAME:"USER", NAME:<user>
            NAME:"ORG", NAME:<organization>
            NAME:"CITY", NAME:<city>
            NAME:"STATE", NAME:<state>
            NAME:"COUNTRY", NAME:<country>
            NAME:"ZIP", NAME:<zip-code>
            NAME:"PHONE", NAME:<phone-number>
            <<other-items>>
          ENDLIST
        NAME:"OPERATION", NAME:"DELIVER"
        NAME:"TYPE-OF-SERVICE", NAME:<type-of-service>
        NAME:"TRACE",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
      ENDLIST
    NAME:"DOC", <<document>>
  ENDLIST


[Page 58]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



7.3.  Acknowledge Message



  PROPLIST:
    NAME:"ID",
      PROPLIST:
        NAME:"MPM",
          PROPLIST:
            NAME:"IA", NAME:<internet-address>
          ENDLIST
        NAME:"TRANSACTION", INTEGER:<transaction-number>
      ENDLIST
    NAME:"CMD",
      PROPLIST:
        NAME:"MAILBOX",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"USER", NAME:"*MPM*"
            NAME:"NET", NAME:<net>
            NAME:"PORT", NAME:<port>
            NAME:"HOST", NAME:<host>
          ENDLIST
        NAME:"OPERATION", NAME:"ACKNOWLEDGE"
        NAME:"REFERENCE",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", NAME:<internet-address>
              ENDLIST
            NAME:"TRANSACTION", INTEGER:<transaction-number>
          ENDLIST
        NAME:"ADDRESS",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"USER", NAME:<user>
          ENDLIST
        NAME:"TYPE-OF-SERVICE", NAME:<type-of-service>
        NAME:"ERROR-CLASS", INDEX:<error-class>
        NAME:"ERROR-STRING", NAME:<error-string>
        NAME:"TRAIL",
          LIST:
            PROPLIST:
              NAME:"MPM",


Postel                                                         [Page 59]


                                                             August 1980
Internet Message Protocol



                PROPLIST:
                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
        NAME:"TRACE",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
      ENDLIST
  ENDLIST




























[Page 60]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



7.4.  Probe Message



  PROPLIST:
    NAME:"ID",
      PROPLIST:
        NAME:"MPM",
          PROPLIST:
            NAME:"IA", NAME:<internet-address>
          ENDLIST
        NAME:"TRANSACTION", INTEGER:<transaction-number>
      ENDLIST
    NAME:"CMD",
      PROPLIST:
        NAME:"MAILBOX",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"NET", NAME:<net>
            NAME:"HOST", NAME:<host>
            NAME:"PORT", NAME:<port>
            NAME:"USER", NAME:<user>
            NAME:"ORG", NAME:<organization>
            NAME:"CITY", NAME:<city>
            NAME:"STATE", NAME:<state>
            NAME:"COUNTRY", NAME:<country>
            NAME:"ZIP", NAME:<zip-code>
            NAME:"PHONE", NAME:<phone-number>
            <<other-items>>
          ENDLIST
        NAME:"OPERATION", NAME:"PROBE"
        NAME:"TRACE",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
      ENDLIST
  ENDLIST




Postel                                                         [Page 61]


                                                             August 1980
Internet Message Protocol



7.5.  Response Message



  PROPLIST:
    NAME:"ID",
      PROPLIST:
        NAME:"MPM",
          PROPLIST:
            NAME:"IA", NAME:<internet-address>
          ENDLIST
        NAME:"TRANSACTION", INTEGER:<transaction-number>
      ENDLIST
    NAME:"CMD",
      PROPLIST:
        NAME:"MAILBOX",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"NET", NAME:<net>
            NAME:"HOST", NAME:<host>
            NAME:"PORT", NAME:<port>
            NAME:"USER", NAME:"*MPM*"
          ENDLIST
        NAME:"OPERATION", NAME:"RESPONSE"
        NAME:"REFERENCE",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", NAME:<internet-address>
              ENDLIST
            NAME:"TRANSACTION", INTEGER:<transaction-number>
          ENDLIST
        NAME:"ADDRESS",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"USER", NAME:<user>
          ENDLIST
        NAME:"ERROR-CLASS", INDEX:<error-class>
        NAME:"ERROR-STRING", NAME:<error-string>
        NAME:"TRAIL",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:


[Page 62]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
        NAME:"TRACE",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
      ENDLIST
  ENDLIST





























Postel                                                         [Page 63]


                                                             August 1980
Internet Message Protocol



7.6.  Cancel Message



  PROPLIST:
    NAME:"ID",
      PROPLIST:
        NAME:"MPM",
          PROPLIST:
            NAME:"IA", NAME:<internet-address>
          ENDLIST
        NAME:"TRANSACTION", INTEGER:<transaction-number>
      ENDLIST
    NAME:"CMD",
      PROPLIST:
        NAME:"MAILBOX",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"NET", NAME:<net>
            NAME:"HOST", NAME:<host>
            NAME:"PORT", NAME:<port>
            NAME:"USER", NAME:<user>
            NAME:"ORG", NAME:<organization>
            NAME:"CITY", NAME:<city>
            NAME:"STATE", NAME:<state>
            NAME:"COUNTRY", NAME:<country>
            NAME:"ZIP", NAME:<zip-code>
            NAME:"PHONE", NAME:<phone-number>
            <<other-items>>
          ENDLIST
        NAME:"OPERATION", NAME:"CANCEL"
        NAME:"REFERENCE",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", NAME:<internet-address>
              ENDLIST
            NAME:"TRANSACTION", INTEGER:<transaction-number>
          ENDLIST
        NAME:"TRACE",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>


[Page 64]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
      ENDLIST
  ENDLIST












































Postel                                                         [Page 65]


                                                             August 1980
Internet Message Protocol



7.7.  Canceled Message



  PROPLIST:
    NAME:"ID",
      PROPLIST:
        NAME:"MPM",
          PROPLIST:
            NAME:"IA", NAME:<internet-address>
          ENDLIST
        NAME:"TRANSACTION", INTEGER:<transaction-number>
      ENDLIST
    NAME:"CMD",
      PROPLIST:
        NAME:"MAILBOX",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"NET", NAME:<net>
            NAME:"HOST", NAME:<host>
            NAME:"PORT", NAME:<port>
            NAME:"USER", NAME:"*MPM*"
          ENDLIST
        NAME:"OPERATION", NAME:"CANCELED"
        NAME:"REFERENCE",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", NAME:<internet-address>
              ENDLIST
            NAME:"TRANSACTION", INTEGER:<transaction-number>
          ENDLIST
        NAME:"ADDRESS",
          PROPLIST:
            NAME:"MPM",
              PROPLIST:
                NAME:"IA", INTEGER:<internet-address>
              ENDLIST
            NAME:"USER", NAME:<user>
          ENDLIST
        NAME:"ERROR-CLASS", INDEX:<error-class>
        NAME:"ERROR-STRING", NAME:<error-string>
        NAME:"TRAIL",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:


[Page 66]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
        NAME:"TRACE",
          LIST:
            PROPLIST:
              NAME:"MPM",
                PROPLIST:
                  NAME:"IA", INTEGER:<internet-address>
                ENDLIST
              NAME:"DATE", NAME:<date>
              NAME:"ACTION", NAME:<action>
            ENDLIST
            ...
          ENDLIST
      ENDLIST
  ENDLIST

  



























Postel                                                         [Page 67]


                                                             August 1980
Internet Message Protocol



7.8.  Data Element Summary



  CODE   NAME      STRUCTURE                                LENGTH
  ----   ----      ---------                                ------

   0     NOP       CODE(1)                                   1



   1     PAD       CODE(1),COUNT(3),DATA(C)                  C+4

   2     BOOLEAN   CODE(1),TRUE-FALSE(1)                     2

   3     INDEX     CODE(1),INDEX(2)                          3

   4     INTEGER   CODE(1),INTEGER(4)                        5

   5     EPI       CODE(1),COUNT(3),INTEGER(C)               C+4

   6     BITSTR    CODE(1),COUNT(3),BITS(C/8)                C/8+4

   7     NAME      CODE(1),COUNT(1),NAME(C)                  C+2

   8     TEXT      CODE(1),COUNT(3),TEXT(C)                  C+4



   9     LIST      CODE(1),COUNT(3),ITEMS(2),DATA(C-2)       C+4



  10     PROPLIST  CODE(1),COUNT(3),PAIRS(1),DATA(C-1)       C+4



  11     ENDLIST   CODE(1)                                   1



  12     S-TAG     CODE(1),INDEX(2)                          3



  13     S-REF     CODE(1),INDEX(2)                          3



  14     ENCRYPT   CODE(1),COUNT(3),ALG-ID(1),
                                   KEY-ID(2),DATA(C-3)       C+4



  The numbers in parentheses are the number of octets in the field.

  











[Page 68]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol



                               REFERENCES



[1]   Cerf, V., "The Catenet Model for Internetworking," Information
      Processing Techniques Office, Defense Advanced Research Projects
      Agency, IEN 48, July 1978.

[2]   Postel, J.,  "DOD Standard Internet Protocol," USC/Information
      Sciences Institute, IEN 128, NTIS number AD A079730, January 1980.

[3]   Postel, J.,  "DOD Standard Transmission Control Protocol,"
      USC/Information Sciences Institute, IEN 129, NTIS number AD
      A082609, January 1980.

[4]   Postel, J., "Assigned Numbers," RFC 762, USC/Information Sciences
      Institute, January 1980.

[5]   Feinler, E. and J. Postel, eds., "ARPANET Protocol Handbook,"
      NIC 7104, for the Defense Communications Agency by the Network
      Information Center of SRI International, Menlo Park, California,
      Revised January 1978.

[6]   Neigus, N., "File Transfer Protocol for the ARPA Network,"
      RFC 542, NIC 17759, SRI International, August 1973.

[7]   Bhushan, A., K. Progran, R. Tomlinson, and J. White,
      "Standardizing Network Mail Headers," RFC 561, NIC 18516,
      September 1973.

[8]   Myer, T., and D. Henderson, "Message Transmission Protocol,"
      RFC 680, NIC 32116, 30 April 1975.

[9]   Crocker, D., J. Vittal, K. Progran, and D. Henderson, "Standard
      for the Format of ARPA Network Text Messages," RFC 733, NIC 41952,
      21 November 1977.

[10]  Barber, D., and J. Laws, "A Basic Mail Scheme for EIN," INWG 192,
      February 1979.

[11]  Braaten, O., "Introduction to a Mail Protocol," Norwegian
      Computing Center, INWG 180, August 1978.

[12]  Crocker, D., E. Szurkowski, and D. Farber, "An Internetwork Memo
      Distribution Capability - MMDF," Sixth Data Communications
      Symposium, ACM/IEEE, November 1979.




Postel                                                         [Page 69]


                                                             August 1980
Internet Message Protocol
References



[13]  Haverty, J., D. Henderson, and D. Oestreicher, "Proposed
      Specification of an Inter-site Message Protocol," 8 July 1975.

[14]  Thomas, R., "Providing Mail Services for NSW Users," BBN NSW
      Working Note 24, Bolt Beranek and Newman, October 1978.

[15]  White, J., "A Proposed Mail Protocol," RFC 524, NIC 17140, SRI
      International, 13 June 1973.

[16]  White, J., "Description of a Multi-Host Journal," NIC 23144, SRI
      International, 30 May 1974.

[17]  White, J., "Journal Subscription Service," NIC 23143, SRI
      International, 28 May 1974.

[18]  Levin, R., and M. Schroeder, "Transport of Electronic Messages
      Through a Network," Teleinformatics 79, Boutmy & Danthine (eds.)
      North Holland Publishing Co., 1979.

[19]  Earnest, L., and J. McCarthy, "DIALNET: A Computer Communications
      Study," Computer Science Department, Stanford University, August
      1978.

[20]  Crispin M., "DIALNET: A Telephone Network Data Communications
      Protocol," DECUS Proceedings, Fall 1979.

[21]  Caulkins, D., "The Personal Computer Network (PCNET) Project: A
      Status Report," Dr. Dobbs Journal of Computer Calisthenics and
      Orthodontia,  v.5, n.6, June 1980.

[22]  Postel, J., "NSW Transaction Protocol (NSWTP)," USC/Information
      Sciences Institute, IEN 38, May 1978.

[23]  Haverty, J., "MSDTP -- Message Services Data Transmission
      Protocol," RFC 713, NIC 34739, April 1976.

[24]  Haverty, J., "Thoughts on Interactions in Distributed Services,"
      RFC 722, NIC 36806, 16 September 1976.

[25]  Postel, J., "A Structured Format for Transmission of Multi-Media
      Documents," RFC 767, USC/Information Sciences Institute,
      August 1980.

[26]  ISO-2014, "Writing of calendar dates in all-numeric form,"
      Recommendation 2014, International Organization for
      Standardization, 1975.



[Page 70]                                                         Postel


August 1980                                                            
                                               Internet Message Protocol
                                                              References



[27]  ISO-3307, "Information Interchange -- Representations of time of
      the day," Recommendation 3307, International Organization for
      Standardization, 1975.

[28]  ISO-4031, "Information Interchange -- Representation of local time
      differentials," Recommendation 4031, International Organization
      for Standardization, 1978.

[29]  CCITT-X.121, "International Numbering Plan for Public Data
      Networks," Recommendation X.121, CCITT, Geneva, 1978.

[30]  Postel, J.,  "NSW Data Representation (NSWB8)," USC/Information
      Sciences Institute, IEN 39, May 1978.

[31]  Cohen, D., "On Holy Wars and a Plea for Peace," IEN 137,
      USC/Information Sciences Institute, 1 April 1980.

[32]  Hofstadter, D., "Godel, Escher, Bach: An Eternal Golden Braid,"
      Basic Books, New York, 1979..

[33]  Harrenstien, K., "Field Addressing," ARPANET Message, SRI
      International, October 1977.

[34]  Postel, J., "Out-of-Net Host Address for Mail," RFC 754,
      USC/Information Sciences Institute, April 1979.

[35]  Shoch, J., "On Inter-Network Naming, Addressing, and Routing,"
      IEEE Computer Society, COMPCON, Fall 1978.

[36]  National Bureau of Standards, "Data Encryption Standard," Federal
      Information Processing Standards Publication 46, January 1977.

[37]  Diffie, W., and M. Hellman, "New Directions in Cryptology," IEEE
      Transactions on Information Theory, IT-22, 6, November 1976.

[38]  Rivest, R., A. Shamir, and L. Adleman,  "A Method for Obtaining
      Digital Signatures and Public-Key Cryptosystems"  Communications
      of the ACM, Vol. 21, Number 2, February 1978.

[39]  Merkle, R., and M. Hellman, "Hiding Information and Signatures in
      Trapdoor Knapsacks," IEEE Transactions of Information Theory,
      IT-24,5, September 1978.







Postel                                                         [Page 71]