Internet Engineering Task Force (IETF) S. Perreault Request for Comments: 7658 Jive Communications Obsoletes: 4008 T. Tsou Category: Standards Track Huawei Technologies ISSN: 2070-1721 S. Sivakumar Cisco Systems T. Taylor PT Taylor Consulting October 2015
Deprecation of MIB Module NAT-MIB: Managed Objects for Network Address Translators (NATs)
Abstract
This memo deprecates MIB module NAT-MIB, a portion of the Management Information Base (MIB) previously defined in RFC 4008 for devices implementing Network Address Translator (NAT) function. A companion document defines a new version, NATV2-MIB, which responds to deficiencies found in module NAT-MIB and adds new capabilities.
This document obsoletes RFC 4008. All MIB objects specified in RFC 4008 are included in this version unchanged with only the STATUS changed to deprecated.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc7658.
Perreault, et al. Standards Track [Page 1]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Copyright Notice
Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This memo deprecates a portion of the Management Information Base (MIB), MIB module NAT-MIB, for devices implementing the Network Address Translator (NAT) function. New implementations are encouraged to base themselves upon the second version of this MIB module, NATV2-MIB, defined in [RFC7659]. NAT types and their characteristics are defined in [RFC2663]. Traditional NAT function, in particular, is defined in [RFC3022]. Neither NAT-MIB nor NATV2-MIB addresses firewall functions, and neither can be used for configuring or monitoring them.
Section 2 provides references to the Simple Network Management Protocol (SNMP) management framework, which was used as the basis for the original MIB module definition and its deprecation. Section 3 provides motivation for the deprecation of module NAT-MIB and its replacement by module NATV2-MIB. Section 4 has the complete NAT-MIB module definition, with the STATUS of all objects changed to
Perreault, et al. Standards Track [Page 2]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
deprecated. Section 5 describes security considerations relating to NAT-MIB, basically relying on the security considerations in [RFC4008] and [RFC7659].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579], and STD 58, RFC 2580 [RFC2580].
All objects defined in [RFC4008] have been marked with "STATUS deprecated" for the following reasons:
Writability: Experience with NAT has shown that implementations vary tremendously. The NAT algorithms and data structures have little in common across devices, and this results in wildly incompatible configuration parameters. Therefore, few implementations were ever able to claim full compliance.
Lesson learned: the MIB should be read-only as much as possible.
Perreault, et al. Standards Track [Page 3]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Exposing configuration parameters: Even in read-only mode, many configuration parameters were exposed by [RFC4008] (e.g., timeouts). Since implementations vary wildly in their sets of configuration parameters, few implementations could claim even basic compliance.
Lesson learned: the NAT-MIB's purpose is not to expose configuration parameters.
Interfaces: Objects from [RFC4008] tie NAT state with interfaces (e.g., the interface table, the way map entries are grouped by interface). Many NAT implementations either never keep track of the interface or associate a mapping to a set of interfaces. Since interfaces are at the core of [RFC4008], many NAT devices were unable to have a proper implementation.
Lesson learned: NAT is a logical function that may be independent of interfaces. Do not tie NAT state with interfaces.
NAT service types: [RFC4008] used four categories of NAT service: basicNat, napt, bidirectionalNat, twiceNat. These are ill- defined, and many implementations either use different categories or do not use categories at all.
Lesson learned: do not try to categorize NAT types.
Limited transport protocol set: The set of transport protocols was defined as: other, icmp, udp, and tcp. Furthermore, the numeric values corresponding to those labels were arbitrary, without relation to the actual standard protocol numbers. This meant that NAT implementations were limited to those protocols and were unable to expose information about DCCP, SCTP, etc.
Lesson learned: use standard transport protocol numbers.
IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, Counter64, TimeTicks, mib-2, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, StorageType, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF ifIndex, ifCounterDiscontinuityGroup FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB InetAddressType, InetAddress, InetPortNumber FROM INET-ADDRESS-MIB;
natMIB MODULE-IDENTITY LAST-UPDATED "201510020000Z" -- 2 October 2015 ORGANIZATION "IETF Behavior Engineering for Hindrance Avoidance (BEHAVE) Working Group" CONTACT-INFO "Working Group Email: behave@ietf.org
Simon Perreault Jive Communications Quebec, QC
Perreault, et al. Standards Track [Page 5]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Canada
Email: sperreault@jive.com
Tina Tsou Huawei Technologies Bantian, Longgang District Shenzhen 518129 China
Email: tina.tsou.zouting@huawei.com
Senthil Sivakumar Cisco Systems 7100-8 Kit Creek Road Research Triangle Park, North Carolina 27709 United States
Phone: +1 919 392 5158 Email: ssenthil@cisco.com
Tom Taylor PT Taylor Consulting Ottawa Canada
Email: tom.taylor.stds@gmail.com" DESCRIPTION "This MIB module defines the generic managed objects for NAT.
Copyright (c) 2015 IETF Trust and the persons identified as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
This version of this MIB module is part of RFC 7658; see the RFC itself for full legal notices." REVISION "201510020000Z" -- 2 October 2015 DESCRIPTION
Perreault, et al. Standards Track [Page 6]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
"Deprecation of all objects, published as RFC 7658. See NATV2-MIB in RFC 7659 for recommended replacement." REVISION "200503210000Z" -- 21 March 2005 DESCRIPTION "Initial version, published as RFC 4008." ::= { mib-2 123 }
natMIBObjects OBJECT IDENTIFIER ::= { natMIB 1 }
NatProtocolType ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "A list of protocols that support the network address translation. Inclusion of the values is not intended to imply that those protocols need to be supported. Any change in this TEXTUAL-CONVENTION should also be reflected in the definition of NatProtocolMap, which is a BITS representation of this. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX INTEGER { none (1), -- not specified other (2), -- none of the following icmp (3), udp (4), tcp (5) }
NatProtocolMap ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "A bitmap of protocol identifiers that support the network address translation. Any change in this TEXTUAL-CONVENTION should also be reflected in the definition of NatProtocolType. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX BITS { other (0), icmp (1), udp (2), tcp (3) }
NatAddrMapId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS deprecated
Perreault, et al. Standards Track [Page 7]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
DESCRIPTION "A unique ID that is assigned to each address map by a NAT-enabled device. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX Unsigned32 (1..4294967295)
NatBindIdOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS deprecated DESCRIPTION "A unique ID that is assigned to each bind by a NAT-enabled device. The bind ID will be zero in the case of a Symmetric NAT. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX Unsigned32 (0..4294967295)
NatBindId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS deprecated DESCRIPTION "A unique ID that is assigned to each bind by a NAT-enabled device. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX Unsigned32 (1..4294967295)
NatSessionId ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS deprecated DESCRIPTION "A unique ID that is assigned to each session by a NAT-enabled device. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX Unsigned32 (1..4294967295)
NatBindMode ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "An indication of whether the bind is an address bind or an address port bind. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX INTEGER { addressBind (1), addressPortBind (2)
Perreault, et al. Standards Track [Page 8]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
}
NatAssociationType ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "An indication of whether the association is static or dynamic. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX INTEGER { static (1), dynamic (2) }
NatTranslationEntity ::= TEXTUAL-CONVENTION STATUS deprecated DESCRIPTION "An indication of a) the direction of a session for which an address map entry, address bind, or port bind is applicable, and b) the entity (source or destination) within the session that is subject to translation. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" SYNTAX BITS { inboundSrcEndPoint (0), outboundDstEndPoint(1), inboundDstEndPoint (2), outboundSrcEndPoint(3) }
-- -- Default Values for the Bind and NAT Protocol Timers --
-- -- NAT configuration related to Address Bind and Port Bind --
natBindDefIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated
Perreault, et al. Standards Track [Page 9]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
DESCRIPTION "The default Bind (Address Bind or Port Bind) idle timeout parameter.
If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a reinitialization of the management system. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 0 } ::= { natDefTimeouts 1 }
-- -- UDP related NAT configuration --
natUdpDefIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The default UDP idle timeout parameter.
If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a reinitialization of the management system. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 300 } ::= { natDefTimeouts 2 }
-- -- ICMP related NAT configuration --
natIcmpDefIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The default ICMP idle timeout parameter.
If the agent is capable of storing non-volatile configuration, then the value of this object must be
Perreault, et al. Standards Track [Page 10]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
restored after a reinitialization of the management system. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 300 } ::= { natDefTimeouts 3 }
-- -- Other protocol parameters --
natOtherDefIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The default idle timeout parameter for protocols represented by the value other (2) in NatProtocolType.
If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a reinitialization of the management system. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 60 } ::= { natDefTimeouts 4 }
-- -- TCP related NAT Timers --
natTcpDefIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The default time interval that a NAT session for an established TCP connection is allowed to remain valid without any activity on the TCP connection.
If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a reinitialization of the management system.
Perreault, et al. Standards Track [Page 11]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 86400 } ::= { natDefTimeouts 5 }
natTcpDefNegTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The default time interval that a NAT session for a TCP connection that is not in the established state is allowed to remain valid without any activity on the TCP connection.
If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a reinitialization of the management system. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 60 } ::= { natDefTimeouts 6 }
natNotifThrottlingInterval OBJECT-TYPE SYNTAX Integer32 (0 | 5..3600) UNITS "seconds" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object controls the generation of the natPacketDiscard notification.
If this object has a value of zero, then no natPacketDiscard notifications will be transmitted by the agent.
If this object has a non-zero value, then the agent must not generate more than one natPacketDiscard 'notification-event' in the indicated period, where a 'notification-event' is the generation of a single notification PDU type to a list of notification destinations. If additional NAT packets are discarded within the throttling period, then notification-events for these changes must be suppressed by the agent until the current throttling period expires.
Perreault, et al. Standards Track [Page 12]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
If natNotifThrottlingInterval notification generation is enabled, the suggested default throttling period is 60 seconds, but generation of the natPacketDiscard notification should be disabled by default.
If the agent is capable of storing non-volatile configuration, then the value of this object must be restored after a reinitialization of the management system.
The actual transmission of notifications is controlled via the MIB modules in RFC 3413. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 0 } ::= { natNotifCtrl 1 }
-- -- The NAT Interface Table --
natInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF NatInterfaceEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table specifies the attributes for interfaces on a device supporting NAT function. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBObjects 3 }
natInterfaceEntry OBJECT-TYPE SYNTAX NatInterfaceEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry in the natInterfaceTable holds a set of parameters for an interface, instantiated by ifIndex. Therefore, the interface index must have been assigned, according to the applicable procedures, before it can be meaningfully used. Generally, this means that the interface must exist.
When natStorageType is of type nonVolatile, however, this may reflect the configuration for an interface whose ifIndex has been assigned but for which the supporting implementation is not currently present.
Perreault, et al. Standards Track [Page 13]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" INDEX { ifIndex } ::= { natInterfaceTable 1 }
natInterfaceRealm OBJECT-TYPE SYNTAX INTEGER { private (1), public (2) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object identifies whether this interface is connected to the private or the public realm. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { public } ::= { natInterfaceEntry 1 }
natInterfaceServiceType OBJECT-TYPE SYNTAX BITS { basicNat (0), napt (1), bidirectionalNat (2), twiceNat (3) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "An indication of the direction in which new sessions are permitted and the extent of translation done within the IP and transport headers. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natInterfaceEntry 2 }
natInterfaceInTranslates OBJECT-TYPE
Perreault, et al. Standards Track [Page 14]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets received on this interface that were translated. Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natInterfaceEntry 3 }
natInterfaceOutTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of translated packets that were sent out this interface.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natInterfaceEntry 4 }
natInterfaceDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of packets that had to be rejected/dropped due to a lack of resources for this interface.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natInterfaceEntry 5 }
MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659, and Section 2 of RFC 2579 (Textual Conventions for Conventions for SMIv2)." DEFVAL { nonVolatile } ::= { natInterfaceEntry 6 }
natInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of this conceptual row.
Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the natInterfaceRowStatus column is 'notReady'.
In particular, a newly created row cannot be made active until the corresponding instance of natInterfaceServiceType has been set.
None of the objects in this row may be modified while the value of this object is active(1). Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659, and Section 2 of RFC 2579 (Textual Conventions for Conventions for SMIv2)." ::= { natInterfaceEntry 7 }
-- -- The Address Map Table --
natAddrMapTable OBJECT-TYPE SYNTAX SEQUENCE OF NatAddrMapEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table lists address map parameters for NAT. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659"
Perreault, et al. Standards Track [Page 16]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
::= { natMIBObjects 4 }
natAddrMapEntry OBJECT-TYPE SYNTAX NatAddrMapEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This entry represents an address map to be used for NAT and contributes to the dynamic and/or static address mapping tables of the NAT device. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" INDEX { ifIndex, natAddrMapIndex } ::= { natAddrMapTable 1 }
natAddrMapIndex OBJECT-TYPE SYNTAX NatAddrMapId MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Along with ifIndex, this object uniquely identifies an entry in the natAddrMapTable. Address map entries are applied in the order specified by natAddrMapIndex.
Perreault, et al. Standards Track [Page 17]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 1 }
natAddrMapName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Name identifying all map entries in the table associated with the same interface. All map entries with the same ifIndex MUST have the same map name. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 2 }
natAddrMapEntryType OBJECT-TYPE SYNTAX NatAssociationType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This parameter can be used to set up static or dynamic address maps. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 3 }
natAddrMapTranslationEntity OBJECT-TYPE SYNTAX NatTranslationEntity MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The endpoint entity (source or destination) in inbound or outbound sessions (i.e., first packets) that may be translated by an address map entry.
Session direction (inbound or outbound) is derived from the direction of the first packet of a session traversing a NAT interface. NAT address (and Transport-ID) maps may be defined to effect inbound or outbound sessions.
Traditionally, address maps for Basic NAT and NAPT are configured on a public interface for outbound sessions, effecting translation of source endpoint. The value of this object must be set to outboundSrcEndPoint for those interfaces.
Perreault, et al. Standards Track [Page 18]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Alternately, if address maps for Basic NAT and NAPT were to be configured on a private interface, the desired value for this object for the map entries would be inboundSrcEndPoint (i.e., effecting translation of source endpoint for inbound sessions).
If twiceNAT were to be configured on a private interface, the desired value for this object for the map entries would be a bitmask of inboundSrcEndPoint and inboundDstEndPoint. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 4 }
natAddrMapLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the address type used for natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 5 }
natAddrMapLocalAddrFrom OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the first IP address of the range of IP addresses mapped by this translation entry. The value of this object must be less than or equal to the value of the natAddrMapLocalAddrTo object.
The type of this address is determined by the value of the natAddrMapLocalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 6 }
natAddrMapLocalAddrTo OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the last IP address of the range of IP addresses mapped by this translation entry. If
Perreault, et al. Standards Track [Page 19]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
only a single address is being mapped, the value of this object is equal to the value of natAddrMapLocalAddrFrom. For a static NAT, the number of addresses in the range defined by natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo must be equal to the number of addresses in the range defined by natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo. The value of this object must be greater than or equal to the value of the natAddrMapLocalAddrFrom object.
The type of this address is determined by the value of the natAddrMapLocalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 7 }
natAddrMapLocalPortFrom OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS deprecated DESCRIPTION "If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value of this object specifies the first port number in the range of ports being mapped.
The value of this object must be less than or equal to the value of the natAddrMapLocalPortTo object. If the translation specifies a single port, then the value of this object is equal to the value of natAddrMapLocalPortTo. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 0 } ::= { natAddrMapEntry 8 }
natAddrMapLocalPortTo OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS deprecated DESCRIPTION "If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value of this object specifies the last port number in the range of ports being mapped.
Perreault, et al. Standards Track [Page 20]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
The value of this object must be greater than or equal to the value of the natAddrMapLocalPortFrom object. If the translation specifies a single port, then the value of this object is equal to the value of natAddrMapLocalPortFrom. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 0 } ::= { natAddrMapEntry 9 }
natAddrMapGlobalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the address type used for natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 10 }
natAddrMapGlobalAddrFrom OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the first IP address of the range of IP addresses being mapped to. The value of this object must be less than or equal to the value of the natAddrMapGlobalAddrTo object.
The type of this address is determined by the value of the natAddrMapGlobalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 11 }
natAddrMapGlobalAddrTo OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the last IP address of the range of IP addresses being mapped to. If only a single address is being mapped to, the value of this object is equal to the value of natAddrMapGlobalAddrFrom. For a static NAT, the number of addresses in the range defined by natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo
Perreault, et al. Standards Track [Page 21]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
must be equal to the number of addresses in the range defined by natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo. The value of this object must be greater than or equal to the value of the natAddrMapGlobalAddrFrom object.
The type of this address is determined by the value of the natAddrMapGlobalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 12 }
natAddrMapGlobalPortFrom OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS deprecated DESCRIPTION "If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value of this object specifies the first port number in the range of ports being mapped to.
The value of this object must be less than or equal to the value of the natAddrMapGlobalPortTo object. If the translation specifies a single port, then the value of this object is equal to the value natAddrMapGlobalPortTo. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 0 } ::= { natAddrMapEntry 13 }
natAddrMapGlobalPortTo OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS deprecated DESCRIPTION "If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row describes NAPT, then the value of this object specifies the last port number in the range of ports being mapped to.
The value of this object must be greater than or equal to the value of the natAddrMapGlobalPortFrom object. If the translation specifies a single port, then the value of this object is equal to the value of
Perreault, et al. Standards Track [Page 22]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
natAddrMapGlobalPortFrom. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" DEFVAL { 0 } ::= { natAddrMapEntry 14 }
natAddrMapProtocol OBJECT-TYPE SYNTAX NatProtocolMap MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies a bitmap of protocol identifiers. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 15 }
natAddrMapInTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of inbound packets pertaining to this address map entry that were translated.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 16 }
natAddrMapOutTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of outbound packets pertaining to this address map entry that were translated.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 17 }
Perreault, et al. Standards Track [Page 23]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
natAddrMapDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of packets pertaining to this address map entry that were dropped due to lack of addresses in the address pool identified by this address map. The value of this object must always be zero in case of a static address map.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 18 }
natAddrMapAddrUsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of addresses pertaining to this address map that are currently being used from the NAT pool. The value of this object must always be zero in the case of a static address map. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrMapEntry 19 }
natAddrMapStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659, and Section 2 of RFC 2579 (Textual Conventions for Conventions for SMIv2)." DEFVAL { nonVolatile } ::= { natAddrMapEntry 20 }
natAddrMapRowStatus OBJECT-TYPE
Perreault, et al. Standards Track [Page 24]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of this conceptual row.
Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the natAddrMapRowStatus column is 'notReady'.
None of the objects in this row may be modified while the value of this object is active(1). Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659, and Section 2 of RFC 2579 (Textual Conventions for Conventions for SMIv2)." ::= { natAddrMapEntry 21 }
-- -- Address Bind section --
natAddrBindNumberOfEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object maintains a count of the number of entries that currently exist in the natAddrBindTable. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBObjects 5 }
-- -- The NAT Address BIND Table --
natAddrBindTable OBJECT-TYPE SYNTAX SEQUENCE OF NatAddrBindEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table holds information about the currently active NAT BINDs. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBObjects 6 }
Perreault, et al. Standards Track [Page 25]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
natAddrBindEntry OBJECT-TYPE SYNTAX NatAddrBindEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry in this table holds information about an active address BIND. These entries are lost upon agent restart.
This row has indexing that may create variables with more than 128 subidentifiers. Implementers of this table must be careful not to create entries that would result in OIDs that exceed the 128 subidentifier limit. Otherwise, the information cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659"
natAddrBindLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies the address type used for natAddrBindLocalAddr. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659"
Perreault, et al. Standards Track [Page 26]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
::= { natAddrBindEntry 1 }
natAddrBindLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object represents the private-realm-specific network-layer address, which maps to the public-realm address represented by natAddrBindGlobalAddr.
The type of this address is determined by the value of the natAddrBindLocalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 2 }
natAddrBindGlobalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the address type used for natAddrBindGlobalAddr. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 3 }
natAddrBindGlobalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object represents the public-realm network-layer address that maps to the private-realm network-layer address represented by natAddrBindLocalAddr.
The type of this address is determined by the value of the natAddrBindGlobalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 4 }
natAddrBindId OBJECT-TYPE SYNTAX NatBindId MAX-ACCESS read-only STATUS deprecated DESCRIPTION
Perreault, et al. Standards Track [Page 27]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
"This object represents a bind ID that is dynamically assigned to each bind by a NAT-enabled device. Each bind is represented by a bind ID that is unique across both the natAddrBindTable and the natAddrPortBindTable. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 5 }
natAddrBindTranslationEntity OBJECT-TYPE SYNTAX NatTranslationEntity MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object represents the direction of sessions for which this bind is applicable and the endpoint entity (source or destination) within the sessions that is subject to translation using the BIND.
Orientation of the bind can be a superset of translationEntity of the address map entry that forms the basis for this bind.
For example, if the translationEntity of an address map entry is outboundSrcEndPoint, the translationEntity of a bind derived from this map entry may either be outboundSrcEndPoint or it may be bidirectional (a bitmask of outboundSrcEndPoint and inboundDstEndPoint). Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 6 }
natAddrBindType OBJECT-TYPE SYNTAX NatAssociationType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates whether the bind is static or dynamic. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 7 }
natAddrBindMapIndex OBJECT-TYPE SYNTAX NatAddrMapId MAX-ACCESS read-only STATUS deprecated
Perreault, et al. Standards Track [Page 28]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
DESCRIPTION "This object is a pointer to the natAddrMapTable entry (and the parameters of that entry) that was used in creating this BIND. This object, in conjunction with the ifIndex (which identifies a unique addrMapName) points to a unique entry in the natAddrMapTable. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 8 }
natAddrBindSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of sessions currently using this BIND. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 9 }
natAddrBindMaxIdleTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the maximum time for which this bind can be idle with no sessions attached to it.
The value of this object is of relevance only for dynamic NAT. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 10 }
natAddrBindCurrentIdleTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "At any given instance, this object indicates the time that this bind has been idle without any sessions attached to it.
The value of this object is of relevance only for dynamic NAT. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659"
Perreault, et al. Standards Track [Page 29]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
::= { natAddrBindEntry 11 }
natAddrBindInTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of inbound packets that were successfully translated by using this bind entry.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 12 }
natAddrBindOutTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of outbound packets that were successfully translated using this bind entry.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrBindEntry 13 }
-- -- Address Port Bind section --
natAddrPortBindNumberOfEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object maintains a count of the number of entries that currently exist in the natAddrPortBindTable. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBObjects 7 }
Perreault, et al. Standards Track [Page 30]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
-- -- The NAT Address Port Bind Table --
natAddrPortBindTable OBJECT-TYPE SYNTAX SEQUENCE OF NatAddrPortBindEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table holds information about the currently active NAPT BINDs. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBObjects 8 }
natAddrPortBindEntry OBJECT-TYPE SYNTAX NatAddrPortBindEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry in the this table holds information about a NAPT bind that is currently active. These entries are lost upon agent restart.
This row has indexing that may create variables with more than 128 subidentifiers. Implementers of this table must be careful not to create entries that would result in OIDs that exceed the 128 subidentifier limit. Otherwise, the information cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" INDEX { ifIndex, natAddrPortBindLocalAddrType, natAddrPortBindLocalAddr, natAddrPortBindLocalPort, natAddrPortBindProtocol } ::= { natAddrPortBindTable 1 }
natAddrPortBindLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies the address type used for natAddrPortBindLocalAddr. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 1 }
natAddrPortBindLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object represents the private-realm-specific network-layer address that, in conjunction with natAddrPortBindLocalPort, maps to the public-realm network-layer address and transport ID represented by natAddrPortBindGlobalAddr and natAddrPortBindGlobalPort, respectively.
The type of this address is determined by the value of the natAddrPortBindLocalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 2 }
natAddrPortBindLocalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "For a protocol value TCP or UDP, this object represents the private-realm-specific port number. On the other hand, for ICMP a bind is created only for query/response- type ICMP messages such as ICMP echo, Timestamp, and Information request messages, and this object represents the private-realm-specific identifier in the ICMP
Perreault, et al. Standards Track [Page 32]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
message, as defined in RFC 792 for ICMPv4 and in RFC 4443 for ICMPv6.
This object, together with natAddrPortBindProtocol, natAddrPortBindLocalAddrType, and natAddrPortBindLocalAddr, constitutes a session endpoint in the private realm. A bind entry binds a private- realm-specific endpoint to a public-realm-specific endpoint, as represented by the tuple of (natAddrPortBindGlobalPort, natAddrPortBindProtocol, natAddrPortBindGlobalAddrType, and natAddrPortBindGlobalAddr). Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 3 }
natAddrPortBindProtocol OBJECT-TYPE SYNTAX NatProtocolType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object specifies a protocol identifier. If the value of this object is none(1), then this bind entry applies to all IP traffic. Any other value of this object specifies the class of IP traffic to which this BIND applies. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 4 }
natAddrPortBindGlobalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the address type used for natAddrPortBindGlobalAddr. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 5 }
natAddrPortBindGlobalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object represents the public-realm-specific network- layer address that, in conjunction with
Perreault, et al. Standards Track [Page 33]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
natAddrPortBindGlobalPort, maps to the private-realm network-layer address and transport ID represented by natAddrPortBindLocalAddr and natAddrPortBindLocalPort, respectively.
The type of this address is determined by the value of the natAddrPortBindGlobalAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 6 }
natAddrPortBindGlobalPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS deprecated DESCRIPTION "For a protocol value TCP or UDP, this object represents the public-realm-specific port number. On the other hand, for ICMP a bind is created only for query/response- type ICMP messages such as ICMP echo, Timestamp, and Information request messages, and this object represents the public-realm-specific identifier in the ICMP message, as defined in RFC 792 for ICMPv4 and in RFC 4443 for ICMPv6.
This object, together with natAddrPortBindProtocol, natAddrPortBindGlobalAddrType, and natAddrPortBindGlobalAddr, constitutes a session endpoint in the public realm. A bind entry binds a public-realm-specific endpoint to a private-realm- specific endpoint, as represented by the tuple of (natAddrPortBindLocalPort, natAddrPortBindProtocol, natAddrPortBindLocalAddrType, and natAddrPortBindLocalAddr). Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 7 }
natAddrPortBindId OBJECT-TYPE SYNTAX NatBindId MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object represents a bind ID that is dynamically assigned to each bind by a NAT-enabled device. Each bind is represented by a unique bind ID across both the natAddrBindTable and the natAddrPortBindTable. Deprecated in favor of NATV2-MIB."
natAddrPortBindTranslationEntity OBJECT-TYPE SYNTAX NatTranslationEntity MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object represents the direction of sessions for which this bind is applicable and the entity (source or destination) within the sessions that is subject to translation with the BIND.
Orientation of the bind can be a superset of the translationEntity of the address map entry that forms the basis for this bind.
For example, if the translationEntity of an address map entry is outboundSrcEndPoint, the translationEntity of a bind derived from this map entry may either be outboundSrcEndPoint or may be bidirectional (a bitmask of outboundSrcEndPoint and inboundDstEndPoint). Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 9 }
natAddrPortBindType OBJECT-TYPE SYNTAX NatAssociationType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates whether the bind is static or dynamic. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 10 }
natAddrPortBindMapIndex OBJECT-TYPE SYNTAX NatAddrMapId MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is a pointer to the natAddrMapTable entry (and the parameters of that entry) used in creating this BIND. This object, in conjunction with the ifIndex (which identifies a unique addrMapName), points to a unique entry in the natAddrMapTable.
Perreault, et al. Standards Track [Page 35]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 11 }
natAddrPortBindSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Number of sessions currently using this BIND. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 12 }
natAddrPortBindMaxIdleTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated
DESCRIPTION "This object indicates the maximum time for which this bind can be idle without any sessions attached to it. The value of this object is of relevance only for dynamic NAT. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 13 }
natAddrPortBindCurrentIdleTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "At any given instance, this object indicates the time that this bind has been idle without any sessions attached to it.
The value of this object is of relevance only for dynamic NAT. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 14 }
natAddrPortBindInTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated
Perreault, et al. Standards Track [Page 36]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
DESCRIPTION "The number of inbound packets that were translated as per this bind entry.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 15 }
natAddrPortBindOutTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of outbound packets that were translated as per this bind entry.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natAddrPortBindEntry 16 }
-- -- The Session Table --
natSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF NatSessionEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table containing one entry for each NAT session currently active on this NAT device. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBObjects 9 }
natSessionEntry OBJECT-TYPE SYNTAX NatSessionEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION
Perreault, et al. Standards Track [Page 37]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
"An entry (conceptual row) containing information about an active NAT session on this NAT device. These entries are lost upon agent restart. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" INDEX { ifIndex, natSessionIndex } ::= { natSessionTable 1 }
natSessionIndex OBJECT-TYPE SYNTAX NatSessionId MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The session ID for this NAT session. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 1 }
natSessionPrivateSrcEPBindId OBJECT-TYPE SYNTAX NatBindIdOrZero MAX-ACCESS read-only STATUS deprecated
Perreault, et al. Standards Track [Page 38]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
DESCRIPTION "The bind ID associated between private and public source endpoints. In the case of Symmetric-NAT, this should be set to zero. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 2 }
natSessionPrivateSrcEPBindMode OBJECT-TYPE SYNTAX NatBindMode MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates whether the bind indicated by the object natSessionPrivateSrcEPBindId is an address bind or an address port bind. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 3 }
natSessionPrivateDstEPBindId OBJECT-TYPE SYNTAX NatBindIdOrZero MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The bind ID associated between private and public destination endpoints. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 4 }
natSessionPrivateDstEPBindMode OBJECT-TYPE SYNTAX NatBindMode MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates whether the bind indicated by the object natSessionPrivateDstEPBindId is an address bind or an address port bind. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 5 }
MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The direction of this session with respect to the local network. 'inbound' indicates that this session was initiated from the public network into the private network. 'outbound' indicates that this session was initiated from the private network into the public network. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 6 }
natSessionUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The uptime of this session in hundredths of a second. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 7 }
natSessionAddrMapIndex OBJECT-TYPE SYNTAX NatAddrMapId MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object is a pointer to the natAddrMapTable entry (and the parameters of that entry) used in creating this session. This object, in conjunction with the ifIndex (which identifies a unique addrMapName), points to a unique entry in the natAddrMapTable. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 8 }
natSessionProtocolType OBJECT-TYPE SYNTAX NatProtocolType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The protocol type of this session. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 9 }
Perreault, et al. Standards Track [Page 40]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
natSessionPrivateAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the address type used for natSessionPrivateSrcAddr and natSessionPrivateDstAddr. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 10 }
natSessionPrivateSrcAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The source IP address of the session endpoint that lies in the private network.
The value of this object must be zero only when the natSessionPrivateSrcEPBindId object has a zero value. When the value of this object is zero, the NAT session lookup will match any IP address to this field.
The type of this address is determined by the value of the natSessionPrivateAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 11 }
natSessionPrivateSrcPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS deprecated DESCRIPTION "For a protocol value of TCP or UDP, this object represents the source port in the first packet of a session while in a private realm. On the other hand, when the protocol is ICMP, a NAT session is created only for query/response-type ICMP messages such as ICMP echo, Timestamp, and Information request messages, and this object represents the private-realm specific identifier in the ICMP message, as defined in RFC 792 for ICMPv4 and in RFC 4443 for ICMPv6.
The value of this object must be zero when the natSessionPrivateSrcEPBindId object has zero value and value of natSessionPrivateSrcEPBindMode is
Perreault, et al. Standards Track [Page 41]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
addressPortBind(2). In such a case, the NAT session lookup will match any port number to this field.
The value of this object must be zero when the object is not a representative field (SrcPort, DstPort, or ICMP identifier) of the session tuple in either the public realm or the private realm. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 12 }
natSessionPrivateDstAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The destination IP address of the session endpoint that lies in the private network.
The value of this object must be zero when the natSessionPrivateDstEPBindId object has a zero value. In such a scenario, the NAT session lookup will match any IP address to this field.
The type of this address is determined by the value of the natSessionPrivateAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 13 }
natSessionPrivateDstPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS deprecated DESCRIPTION "When the value of protocol is TCP or UDP, this object represents the destination port in the first packet of session while in private-realm. On the other hand, when the protocol is ICMP, this object is not relevant and should be set to zero.
The value of this object must be zero when the natSessionPrivateDstEPBindId object has a zero value and natSessionPrivateDstEPBindMode is set to addressPortBind(2). In such a case, the NAT session lookup will match any port number to this field.
The value of this object must be zero when the object
Perreault, et al. Standards Track [Page 42]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
is not a representative field (SrcPort, DstPort, or ICMP identifier) of the session tuple in either the public realm or the private realm. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 14 }
natSessionPublicAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the address type used for natSessionPublicSrcAddr and natSessionPublicDstAddr. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 15 }
natSessionPublicSrcAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The source IP address of the session endpoint that lies in the public network.
The value of this object must be zero when the natSessionPrivateSrcEPBindId object has a zero value. In such a scenario, the NAT session lookup will match any IP address to this field.
The type of this address is determined by the value of the natSessionPublicAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 16 }
natSessionPublicSrcPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS deprecated DESCRIPTION "When the protocol value is TCP or UDP, this object represents the source port in the first packet of session while in public-realm. On the other hand, when protocol is ICMP, a NAT session is created only for query/response-type ICMP messages such as ICMP echo, Timestamp, and Information request messages, and this
Perreault, et al. Standards Track [Page 43]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
object represents the public-realm-specific identifier in the ICMP message, as defined in RFC 792 for ICMPv4 and in RFC 4443 for ICMPv6.
The value of this object must be zero when the natSessionPrivateSrcEPBindId object has a zero value and natSessionPrivateSrcEPBindMode is set to addressPortBind(2). In such a scenario, the NAT session lookup will match any port number to this field.
The value of this object must be zero when the object is not a representative field (SrcPort, DstPort, or ICMP identifier) of the session tuple in either the public realm or the private realm. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 17 }
natSessionPublicDstAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The destination IP address of the session endpoint that lies in the public network.
The value of this object must be non-zero when the natSessionPrivateDstEPBindId object has a non-zero value. If the value of this object and the corresponding natSessionPrivateDstEPBindId object value are zero, then the NAT session lookup will match any IP address to this field.
The type of this address is determined by the value of the natSessionPublicAddrType object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 18 }
natSessionPublicDstPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS deprecated DESCRIPTION "When the protocol value is TCP or UDP, this object represents the destination port in the first packet of session while in the public realm. On the other hand, when
Perreault, et al. Standards Track [Page 44]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
the protocol is ICMP, this object is not relevant for translation and should be zero.
The value of this object must be zero when the natSessionPrivateDstEPBindId object has a zero value and natSessionPrivateDstEPBindMode is addressPortBind(2). In such a scenario, the NAT session lookup will match any port number to this field.
The value of this object must be zero when the object is not a representative field (SrcPort, DstPort, or ICMP identifier) of the session tuple in either the public realm or the private realm. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 19 }
natSessionMaxIdleTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The max time for which this session can be idle without detecting a packet. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 20 }
natSessionCurrentIdleTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The time since a packet belonging to this session was last detected. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 21 }
natSessionInTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of inbound packets that were translated for this session.
Perreault, et al. Standards Track [Page 45]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 22 }
natSessionOutTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of outbound packets that were translated for this session.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natSessionEntry 23 }
-- -- The Protocol table --
natProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF NatProtocolEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The (conceptual) table containing per-protocol NAT statistics. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBObjects 10 }
natProtocolEntry OBJECT-TYPE SYNTAX NatProtocolEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry (conceptual row) containing NAT statistics pertaining to a particular protocol. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659"
natProtocol OBJECT-TYPE SYNTAX NatProtocolType MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This object represents the protocol pertaining to which parameters are reported. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natProtocolEntry 1 }
natProtocolInTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of inbound packets pertaining to the protocol identified by natProtocol that underwent NAT.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natProtocolEntry 2 }
natProtocolOutTranslates OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of outbound packets pertaining to the protocol identified by natProtocol that underwent NAT.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of
Perreault, et al. Standards Track [Page 47]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natProtocolEntry 3 }
natProtocolDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The number of packets pertaining to the protocol identified by natProtocol that had to be rejected/dropped due to lack of resources. These rejections could be due to session timeout, resource unavailability, lack of address space, etc.
Discontinuities in the value of this counter can occur at reinitialization of the management system and at other times, as indicated by the value of ifCounterDiscontinuityTime on the relevant interface. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natProtocolEntry 4 }
natPacketDiscard NOTIFICATION-TYPE OBJECTS { ifIndex } STATUS deprecated DESCRIPTION "This notification is generated when IP packets are discarded by the NAT function; e.g., due to lack of mapping space when NAT is out of addresses or ports.
Note that the generation of natPacketDiscard notifications is throttled by the agent, as specified by the 'natNotifThrottlingInterval' object. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBNotifications 1 }
natSessionInTranslates, natSessionOutTranslates } STATUS deprecated DESCRIPTION "A collection of BIND-related objects required to support management of devices supporting NAT. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBGroups 2 }
natStatsInterfaceGroup OBJECT-GROUP OBJECTS { natInterfaceInTranslates, natInterfaceOutTranslates, natInterfaceDiscards } STATUS deprecated DESCRIPTION "A collection of NAT statistics associated with the interface on which NAT is configured, to aid troubleshooting/monitoring of the NAT operation. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBGroups 3 }
natStatsProtocolGroup OBJECT-GROUP OBJECTS { natProtocolInTranslates, natProtocolOutTranslates, natProtocolDiscards } STATUS deprecated DESCRIPTION "A collection of protocol-specific NAT statistics, to aid troubleshooting/monitoring of NAT operation. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBGroups 4 }
natStatsAddrMapGroup OBJECT-GROUP OBJECTS { natAddrMapInTranslates, natAddrMapOutTranslates, natAddrMapDiscards, natAddrMapAddrUsed } STATUS deprecated DESCRIPTION "A collection of address-map-specific NAT statistics, to aid troubleshooting/monitoring of NAT operation. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBGroups 5 }
Perreault, et al. Standards Track [Page 51]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
natMIBNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { natPacketDiscard } STATUS deprecated DESCRIPTION "A collection of notifications generated by devices supporting this MIB. Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" ::= { natMIBGroups 6 }
-- -- Compliance statements --
natMIBFullCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "When this MIB is implemented with support for read-create, then such an implementation can claim full compliance. Such devices can then be both monitored and configured with this MIB.
The following index objects cannot be added as OBJECT clauses but nevertheless have the compliance requirements:
Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" -- OBJECT natAddrBindLocalAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6."
-- OBJECT natAddrBindLocalAddr -- SYNTAX InetAddress (SIZE(4|16)) -- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6."
-- OBJECT natAddrPortBindLocalAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6."
Perreault, et al. Standards Track [Page 52]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
-- OBJECT natAddrPortBindLocalAddr -- SYNTAX InetAddress (SIZE(4|16)) -- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6."
MODULE -- this module MANDATORY-GROUPS { natConfigGroup, natTranslationGroup, natStatsInterfaceGroup }
GROUP natStatsProtocolGroup DESCRIPTION "This group is optional." GROUP natStatsAddrMapGroup DESCRIPTION "This group is optional." GROUP natMIBNotificationGroup DESCRIPTION "This group is optional."
OBJECT natAddrMapLocalAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapLocalAddrFrom SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapLocalAddrTo SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapGlobalAddrType
Perreault, et al. Standards Track [Page 53]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapGlobalAddrFrom SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapGlobalAddrTo SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrBindGlobalAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrBindGlobalAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrPortBindGlobalAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrPortBindGlobalAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
Perreault, et al. Standards Track [Page 54]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
OBJECT natSessionPrivateAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPrivateSrcAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPrivateDstAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPublicAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPublicSrcAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPublicDstAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
::= { natMIBCompliances 1 }
natMIBReadOnlyCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION
Perreault, et al. Standards Track [Page 55]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
"When this MIB is implemented without support for read-create (i.e., in read-only mode), then such an implementation can claim read-only compliance. Such a device can then be monitored but cannot be configured with this MIB.
The following index objects cannot be added as OBJECT clauses but nevertheless have the compliance requirements:
Deprecated in favor of NATV2-MIB." REFERENCE "RFC 7658, RFC 7659" -- OBJECT natAddrBindLocalAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6."
-- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6."
-- OBJECT natAddrPortBindLocalAddrType -- SYNTAX InetAddressType { ipv4(1), ipv6(2) } -- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6." -- OBJECT natAddrPortBindLocalAddr -- SYNTAX InetAddress (SIZE(4|16)) -- DESCRIPTION -- "An implementation is required to support -- global IPv4 and/or IPv6 addresses, depending -- on its support for IPv4 and IPv6."
MODULE -- this module MANDATORY-GROUPS { natConfigGroup, natTranslationGroup, natStatsInterfaceGroup }
Perreault, et al. Standards Track [Page 56]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
GROUP natStatsProtocolGroup DESCRIPTION "This group is optional." GROUP natStatsAddrMapGroup DESCRIPTION "This group is optional." GROUP natMIBNotificationGroup DESCRIPTION "This group is optional." OBJECT natInterfaceRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported."
OBJECT natAddrMapLocalAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapLocalAddrFrom SYNTAX InetAddress (SIZE(4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapLocalAddrTo SYNTAX InetAddress (SIZE(4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapGlobalAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
Perreault, et al. Standards Track [Page 57]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
OBJECT natAddrMapGlobalAddrFrom SYNTAX InetAddress (SIZE(4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapGlobalAddrTo SYNTAX InetAddress (SIZE(4|16)) MIN-ACCESS read-only DESCRIPTION "Write access is not required. An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrMapRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported."
OBJECT natAddrBindGlobalAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrBindGlobalAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrPortBindGlobalAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natAddrPortBindGlobalAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4
Perreault, et al. Standards Track [Page 58]
RFC 7658 Deprecation of NAT-MIB v1 October 2015
and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPrivateAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPrivateSrcAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPrivateDstAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPublicAddrType SYNTAX InetAddressType { ipv4(1), ipv6(2) } DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPublicSrcAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
OBJECT natSessionPublicDstAddr SYNTAX InetAddress (SIZE(4|16)) DESCRIPTION "An implementation is required to support global IPv4 and/or IPv6 addresses, depending on its support for IPv4 and IPv6."
All objects in this MIB module have been deprecated. As a result, the security considerations in [RFC7659] apply instead. Amongst other matters, these considerations cover the case where both this MIB module and NATV2-MIB are present. In fact, such a situation is unlikely because [RFC4008], as a MIB module oriented toward configuration, was overtaken by events and saw little implementation.
IANA has assigned object identifier 123 to the natMIB module, with prefix iso.org.dod.internet.mgmt.mib-2 in the Network Management Parameters registry [SMI-NUMBERS].
IANA has marked that identifier as DEPRECATED and updated the reference from [RFC4008] to the present document.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, DOI 10.17487/RFC3411, December 2002, <http://www.rfc-editor.org/info/rfc3411>.
[RFC4443] Conta, A., Deering, S., and M. Gupta, Ed., "Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6) Specification", RFC 4443, DOI 10.17487/RFC4443, March 2006, <http://www.rfc-editor.org/info/rfc4443>.