Internet Engineering Task Force (IETF) Y. Oiwa Request for Comments: 8053 H. Watanabe Category: Experimental H. Takagi ISSN: 2070-1721 ITRI, AIST K. Maeda T. Hayashi Lepidum Y. Ioku Individual Contributor January 2017
HTTP Authentication Extensions for Interactive Clients
Abstract
This document specifies extensions for the HTTP authentication framework for interactive clients. Currently, fundamental features of HTTP-level authentication are insufficient for complex requirements of various Web-based applications. This forces these applications to implement their own authentication frameworks by means such as HTML forms, which becomes one of the hurdles against introducing secure authentication mechanisms handled jointly by servers and user agents. The extended framework fills gaps between Web application requirements and HTTP authentication provisions to solve the above problems, while maintaining compatibility with existing Web and non-Web uses of HTTP authentication.
Status of This Memo
This document is not an Internet Standards Track specification; it is published for examination, experimental implementation, and evaluation.
This document defines an Experimental Protocol for the Internet community. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are a candidate for any level of Internet Standard; see Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc8053.
Oiwa, et al. Experimental [Page 1]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Oiwa, et al. Experimental [Page 2]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
This document defines several extensions to the current HTTP authentication framework, to provide functionality comparable with current, widely used, form-based Web authentication. A majority of the recent websites on the Internet use custom application-layer authentication implementations using Web forms. The reasons for these may vary, but many people believe that the current HTTP Basic and Digest authentication methods do not have enough functionality (including good user interfaces) to support most realistic Web-based applications. However, such use of form-based Web authentication has several weaknesses against attacks like phishing, because all behavior of the authentication is controlled from the server-side application. This makes it really hard to implement any cryptographically strong authentication mechanisms into Web systems. To overcome this problem, we need to "modernize" the HTTP authentication framework so that better client-controlled secure methods can be used with Web applications. The extensions proposed in this document include:
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
This document distinguishes the terms "client" and "user" in the following way: a "client" is an entity understanding and talking HTTP and the specified authentication protocol, usually computer software; a "user" is a (usually natural) person who wants to access data resources using "a client".
Oiwa, et al. Experimental [Page 4]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
2.1. Terms for Describing Authentication Protocol Flow
HTTP Authentication defined in [RFC7235] can involve several pairs of HTTP requests/responses. Throughout this document, the following terms are used to categorize those messages.
For requests:
1) A non-authenticating request is a request not attempting any authentication: a request without any Authorization header field.
2) An authenticating request is the opposite: a request with an Authorization header field.
For responses:
1) A non-authenticated response is a response that does not involve any HTTP authentication. It does not contain any WWW-Authenticate ([RFC7235]) or Authentication-Info header field ([RFC7615]).
Servers send this response when the requested resource is not protected by an HTTP authentication mechanism. In the context of this specification, non-authentication-related negative responses (e.g., 403 and 404) are also considered non-authenticated responses.
(See the note on successfully authenticated responses below for some ambiguous cases.)
2) An authentication-initializing response is a response that requires or allows clients to start authentication attempts. Servers send this response when the requested resource is protected by an HTTP authentication mechanism, and the request meets one of the following cases:
* The request is a non-authenticating request, or
* The request contained an authentication trial directed to a protection space (realm) other than the one that the server expected.
The server will specify the protection space for authentication in this response.
Oiwa, et al. Experimental [Page 5]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Upon receiving this response, the client's behavior is further divided to two possible cases:
* If the client has no prior knowledge on authentication credentials (e.g., a username and a password) related to the requested protection space, the protocol flow terminates and the client will ask the user to provide authentication credentials.
* On the other hand, if the client already has enough authentication credentials to the requested protection space, the client will automatically send an authenticating request. Such cases often occur when the client does not know beforehand that the current request-URL requires authentication.
3) A successfully authenticated response is a response for an authenticating request meaning that the authentication attempt was granted. (Note: if the authentication scheme used does not use an Authentication-Info header field, it can't be distinguished from a non-authenticated response.)
4) An intermediate authenticating response is a response for an authenticating request that requires more reaction by the client software without involving users. Such a response is required when an authentication scheme requires two or more round-trip messages to perform authentication, or when an authentication scheme uses some speculative short-cut method (such as uses of cached shared secrets) and it fails.
5) A negatively authenticated response is a response for an authenticating request, which means that the authentication attempt was declined and cannot continue without a different set of authentication credentials. Clients typically erase the memory of the active credentials and ask the user for other ones.
Usually the format of these responses is the same as the one for authentication-initializing responses. Clients can distinguish negatively authenticated responses from authentication- initializing responses by comparing the protection spaces contained in the request and in the response.
Figure 1 shows a state diagram of generic HTTP authentication with the above message categorization. Note that many authentication schemes use only a subset of the transitions described in the diagram. Labels in the figure show the abbreviated names of response types.
Oiwa, et al. Experimental [Page 6]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
=========== ----------------- NEW REQUEST ( UNAUTHENTICATED ) =========== ----------------- | ^ non-auth. v | response +----------------------+ NO +-------------+ | The requested URI |--------------------------->| send normal | | known to be auth'ed? | ---------------->| request | +----------------------+ / +-------------+ YES | / initializing| v / | +------------------+ NO / | | Can auth-req.(*1)|--------- | | be constructed? | | +------------------+ | YES | initializing | | ---------------------------------------. | | / v v | | ---------------- NO +-----------+ | | ( AUTH-REQUESTED )<------| passwords | | | ---------------- |etc. known?| v | +-----------+ +-----------+ negative ------------- negative |YES | send |---------->( AUTH-FAILED )<---------, | /| auth-req | ------------- | | / +-----------+\ | v | \ \ intermediate +-----------+ | \ -------------------------------->| send | | \ | auth-req | | non-auth. \successful successful +-----------+ | response (*2) \ / | ^ v \ / | | ----------------- \ -------------- / `----' ( UNAUTHENTICATED ) ----->( AUTH-SUCCEED )<---- intermediate ----------------- --------------
Figure 1: Generic State Diagram for HTTP Authentication
Notes: (*1) For example, the "Digest" scheme requires a server-provided nonce to construct client-side challenges. (*2) In "Basic" and some others, this cannot be distinguished from a successfully authenticated response.
Oiwa, et al. Experimental [Page 7]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
This specification uses an extended ABNF syntax defined in [RFC7230] and [RFC5234]. The following syntax definitions are quoted from [RFC7230] and [RFC7235]: auth-scheme, quoted-string, auth-param, SP, BWS, header-field, and challenge. It also uses the convention of using header field names for specifying the syntax of values for the header field.
Additionally, this specification uses the following syntax definitions as a refinement for token and the right-hand-side of auth-param in [RFC7235].
Extensive-tokens are used in this protocol where the set of acceptable tokens includes private extensions. Any extensions of this protocol MAY use either bare-tokens allocated by IANA (under the procedure described in Section 7), or extension-tokens with the format "-<token>.<domain-name>", where <domain-name> is a valid (sub-)domain name on the Internet owned by the party who defines the extension.
The Optional-WWW-Authenticate header enables a non-mandatory authentication, which is not possible under the current HTTP authentication mechanism.
In several Web applications, users can access the same contents as both a guest user and an authenticated user. In most Web applications, this functionality is implemented using HTTP cookies [RFC6265] and custom form-based authentication. The new authentication method using this message will provide a replacement for these authentication systems.
Oiwa, et al. Experimental [Page 8]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Servers MAY send HTTP non-interim responses containing the Optional-WWW-Authenticate header as a replacement for a 401 response when it is authentication-initializing. The Optional-WWW-Authenticate header MUST NOT be sent on 401 responses (i.e., a usual WWW-Authenticate header MUST be used on 401 responses).
Optional-WWW-Authenticate = 1#challenge
Figure 3: BNF Syntax for Optional-WWW-Authenticate Header
Example: HTTP/1.1 200 OK Optional-WWW-Authenticate: Basic realm="xxxx"
The challenges contained in the Optional-WWW-Authenticate header are the same as those for a 401 response corresponding to the same request. For authentication-related matters, an optional authentication request will have the same meaning as a 401 message with a corresponding WWW-Authenticate header (as an authentication- initializing response). (The behavior for other matters MAY be different between the optional authentication and 401 messages. For example, clients MAY choose to cache the 200 messages with the Optional-WWW-Authenticate header field but not the 401 messages by default.)
A response with an Optional-WWW-Authenticate header SHOULD be returned from the server only when the request is either non- authenticated or authenticating to a wrong (not the server's expected) protection space. If a response is either an intermediate or a negative response to a client's authentication attempt, the server MUST respond with a 401 status response with a WWW-Authenticate header instead. Failure to comply with this rule will render clients unable to distinguish between authentication successes and failures.
The server is NOT RECOMMENDED to include an Optional-WWW-Authenticate header in a positive response when a client's authentication attempt succeeds.
Whenever an authentication scheme supports servers sending some parameter that gives a hint about the URL space for the corresponding protection space for the same realm (e.g., "path" or "domain"), servers requesting non-mandatory authentication SHOULD send such a parameter with the response. Clients supporting non-mandatory authentication MUST recognize the parameter and MUST send a request with an appropriate authentication credential in an Authorization header for any URI inside the specified paths.
Oiwa, et al. Experimental [Page 9]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Implementations are not required to support this header for all of their supported authentication schemes (i.e., they may choose to implement it only for a subset of their supported schemes). New authentication schemes can require support of the optional authentication as a prerequisite, though.
3.1. Note on Optional-WWW-Authenticate and Use of WWW-Authenticate Header with Non-401 Status
In the current specification of HTTP/1.1, it is clarified that the WWW-Authenticate header can be used with messages with status codes other than 401 (Authentication Required). In particular, the use of the WWW-Authenticate header with the 200 status messages implies a very similar meaning to the above-defined Optional-WWW-Authenticate header.
The design of Optional-WWW-Authenticate header expects that the use of a new header guarantees that clients that are unaware of this extension will ignore the header, and that Web developers can rely on that behavior to implement a secondary fallback method of authentication. Several behavioral requirements written in the above section also assume this property and define a necessary functionality to implement an optional authentication reliably and consistently.
On the other hand, some experiments and discussions on the IETF mailing list revealed that most of (but not necessarily all of) the existing HTTP clients, at the time of writing, just ignore the WWW- Authenticate headers in non-401 messages, giving similar behavior with the Optional-WWW-Authenticate. However, every corner case of behavior was not fully tested or well-defined in the existing specifications.
Considering these situations, the authors of this document chose to use a new header for a new feature "experiment". This is to avoid defining every corner-case behavior for the existing standard WWW- Authentication header in this experimental document, which could be considered by some implementers as an incompatible changes to existing specification.
Experimentally, the authors propose that implementers of the standard HTTP/1.1 specification (especially implementers of this extension) implement undefined (implementation-dependent) detailed handling of the WWW-Authenticate header with non-401 status messages similar as those defined above for the Optional-WWW-Authenticate header. For example, we propose that servers return the 401 status for failed authentication attempts, even when the unauthenticated request to the same resource will result in the 200 status. This can determine how
Oiwa, et al. Experimental [Page 10]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
(whether) non-mandatory authentication using the standard header fields and status codes can be implemented. If this experiment is successful, a future revision of this experimental document may "bless" and recommend the use of a standard WWW-Authenticate header, with some stricter requirements on some corner-case behavior.
Figure 4: The BNF Syntax for the Authentication-Control Header
The Authentication-Control header provides more precise control of the client behavior for Web applications using an HTTP authentication protocol. This header is supposed to be generated in the application layer, as opposed to the WWW-Authenticate headers, which will usually be generated by the Web servers.
Clients MAY freely choose any subset of these parameters to be supported. Also, these may choose to support any of the parameters for only a subset of their supported authentication schemes. However, authentication schemes can require/recommend support for some of these parameters as a prerequisite.
The Authentication-Control header contains one or more "authentication control entries", each of which corresponds to a single realm for a specific authentication scheme. If the auth-scheme specified for an entry supports the HTTP "realm" feature, that entry MUST contain the "realm" parameter. If not, the entry MUST NOT contain the "realm" parameter.
Among the multiple entries in the header, the relevant entries in the header are those corresponding to an auth-scheme and a realm (if any) for which "the authentication process is being performed or going to be performed". In more detail:
(1) If the response is either an authentication-initializing response or a negatively authenticated response, there can be multiple challenges in the WWW-Authenticate header (or the Optional-WWW-Authenticate header defined in this extension), each of which corresponds to a different scheme and realm. In this case, the client has a choice about the scheme and realm they will use to authenticate. Only the entry in the
Oiwa, et al. Experimental [Page 11]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Authentication-Control header corresponding to that scheme and realm are relevant.
(2) If the response is either an intermediate authenticating response or a successfully authenticated response, the scheme and realm given in the Authorization header of the HTTP request will determine the currently ongoing authentication process. Only the entry corresponding to that scheme and realm are relevant.
The server MAY send an Authentication-Control header containing non- relevant entries. The client MUST ignore all non-relevant entries it received.
Every entry contains one or more parameters, each of which is a name- value pair. The name of each parameter MUST be an extensive-token. Clients MUST ignore any unknown parameters contained in this header. The entries for the same auth-scheme and the realm MUST NOT contain duplicated parameters for the same name. Clients MAY either take any one of those duplicated entries or ignore all of them.
The type of parameter value depends on the parameter name as defined in the following subsections. Regardless of the type, however, the recipients MUST accept both quoted and unquoted representations of values as defined in HTTP. If the parameter is defined to have a string value, implementations MUST send any value outside of the "token" ABNF syntax in either a quoted form or an ext-value form (see Section 4.1). If the parameter is defined as a token (or similar) or an integer, the value SHOULD follow the corresponding ABNF syntax after possible unquoting of the quoted-string value (as defined in HTTP) and MUST be sent in a plain (not an ext-value) form. (Note: the rest of this document will show all string-value parameters in quoted forms, and it will show others in unquoted forms.)
Any parameters contained in this header MAY be ignored by clients. Also, even when a client accepts this header, users are able to circumvent the semantics of this header. Therefore, if this header is used for security purposes, its use MUST be limited to providing some non-fundamental additional security measures valuable for end- users (such as client-side logout for protection against console takeover). Server-side applications MUST NOT rely on the use of this header for protecting server-side resources.
Note: The header syntax allows servers to specify Authentication- Control for multiple authentication schemes, either as multiple occurrences of this header or as a combined single header (see Section 3.2.2 of [RFC7230] for rationale). The same care as for parsing multiple authentication challenges needs to be taken.
Oiwa, et al. Experimental [Page 12]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Parameters contained in the Authentication-Control header MAY be extended to non-ASCII values using the framework described in [RFC5987]. All servers and clients MUST be capable of receiving and sending values encoded in [RFC5987] syntax.
If a value to be sent contains only ASCII characters, the field MUST be sent using plain RFC 7235 syntax. The syntax as extended by ext-value MUST NOT be used in this case.
If a value (except the "realm" header) contains one or more non-ASCII characters, the parameter SHOULD be sent using the ext-value syntax defined in Section 3.2 of [RFC5987]. Such a parameter MUST have a charset value of "UTF-8", and the language value MUST always be omitted (have an empty value). The same parameter MUST NOT be sent more than once, regardless of the syntax used.
For example, a parameter "username" with the value "Renee of France" SHOULD be sent as < username="Renee of France" >. If the value is "Ren<e acute>e of France", it SHOULD be sent as < username*=UTF-8''Ren%C3%89e%20of%20France > instead.
Interoperability note: [RFC7235], Section 2.2, defines the "realm" authentication parameter that cannot be replaced by the "realm*" extend parameter. This means that the use of non-ASCII values for an authentication realm is not the defined behavior in HTTP. Unfortunately, some people currently use a non-ASCII realm parameter in reality, but even its encoding scheme is not well defined. Given this background, this document does not specify how to handle a non-ASCII "realm" parameter in the extended header fields. If needed, the authors propose using a non-extended "realm" parameter form, with a wish for maximum interoperability.
The parameter "auth-style" specifies the server's preference for user interface behavior for user authentication. This parameter can be included in any kind of response; however, it is only meaningful for either authentication-initializing or negatively authenticated responses. The value of this parameter MUST be one of the bare- tokens, "modal" or "non-modal". When the Optional-WWW-Authenticate header is used, the value of this parameter MUST be disregarded and the value "non-modal" is implied.
Oiwa, et al. Experimental [Page 13]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
The value "modal" means that the server thinks the content of the response (body and other content-related headers) is valuable only for users refusing the authentication request. The clients are expected to ask the user for a password before processing the content. This behavior is common for most of the current implementations of Basic and Digest authentication schemes.
The value "non-modal" means that the server thinks that the content of the response (body and other content-related headers) is valuable for users before processing an authentication request. The clients are expected to first process the content and then provide users with the opportunity to perform authentication.
The default behavior for clients is implementation dependent, and it may also depend on authentication schemes. The proposed default behavior is "modal" for all authentication schemes unless otherwise specified.
The above two different methods of authentication possibly introduce an observable difference of semantics when the response contains state-changing side effects; for example, it can affect how Cookie headers [RFC6265] in 401 responses are processed. However, the server applications SHOULD NOT depend on the existence of such side effects.
The parameter "location-when-unauthenticated" specifies a location to which any unauthenticated clients should be redirected. This header can be used, for example, when there is a central login page for the entire Web application. The value of this parameter is a string that contains a URL location. If a received URL is not absolute, the clients SHOULD consider it a relative URL from the current location.
This parameter MAY be used with a 401 response for an authentication- initializing response. It can also be contained, although this is NOT RECOMMENDED, in a positive response with an Optional-WWW-Authenticate header. The clients MUST ignore this parameter when a response is either successfully authenticated or intermediately authenticated.
Oiwa, et al. Experimental [Page 14]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
When a client receives an authentication-initiating response with this parameter, and if the client has to ask users for authentication credentials, the client will treat the entire response as if it were a 303 "See Other" response with a Location header that contains the value of this parameter (i.e., the client will be redirected to the specified location with a GET request). Unlike a normal 303 response, if the client can process authentication without the user's interaction, this parameter MUST be ignored.
The parameter "no-auth" is a variant of the location-when-unauthenticated parameter; it specifies that new authentication attempts are not to be performed on this location in order to improve the user experience, without specifying the redirection on the HTTP level. This header can be used, for example, when there is a central login page for the entire Web application and when an explicit user interaction with the Web content is desired before authentication. The value of this parameter MUST be a token "true". If the value is incorrect, the client MAY ignore this parameter.
This parameter MAY be used with authentication-initiating responses. It can also be contained, although this is NOT RECOMMENDED, in a positive response with an Optional-WWW-Authenticate header. The clients MUST ignore this parameter when a response is either successfully authenticated or intermediately authenticated.
When a client receives an authentication-initiating response with this parameter, if the client has to ask users for authentication credentials, the client will ignore the WWW-Authenticate header contained in the response and treat the whole response as a normal negative 4xx-class response instead of giving the user an opportunity to start authentication. If the client can process authentication without the user's interaction, this parameter MUST be ignored.
Using this parameter along with the location-when-unauthenticated parameter is meaningless. If both were supplied, clients SHOULD ignore the location-when-unauthenticated parameter.
This parameter SHOULD NOT be used as a security measure to prevent authentication attempts, as it is easily circumvented by users. This parameter SHOULD be used solely for improving the user experience of Web applications.
Oiwa, et al. Experimental [Page 15]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
The parameter "location-when-logout" specifies a location where the client is to be redirected when the user explicitly requests a logout. The value of this parameter MUST be a string that contains a URL location. If a given URL is not absolute, the clients MUST consider it a relative URL from the current location.
This parameter MAY be used with successfully authenticated responses. If this parameter is contained in other kinds of responses, the clients MUST ignore this parameter.
When the user tells the client to terminate the current authentication period, if the client currently displays a page supplied by a response with this parameter, the client will automatically change the current location to the location specified in this parameter using a new GET request, as if it has received a 303 response. Any operations related to logout (e.g., erasing memories of username, authentication credential, and all related one- time credentials such as nonce or keys) SHOULD occur before processing a page transition.
When the user requests the client for the termination of an authentication period, if the client supports this parameter but the server response does not contain this parameter, the client's RECOMMENDED behavior is as follows: if the request corresponding to the current content was the GET method, reload the page without the authentication credential. Otherwise, keep the current content as-is and simply forget the authentication status. The client SHOULD NOT replay a non-idempotent request without the user's explicit approval.
Web applications are encouraged to send this parameter with an appropriate value for any responses (except those with redirection (3XX) statuses) for non-GET requests.
See Section 5 for some examples for possible deployment of this parameter.
Oiwa, et al. Experimental [Page 16]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
The parameter "logout-timeout", when contained in a successfully authenticated response, means that any authentication credentials and state related to the current protection space are to be discarded if the time specified in this header (in seconds) has passed since the time this header was received. The value MUST be an integer. As a special case, the value 0 means that the server is logging the client out immediately from the current authentication space and that the client is now returned to the unauthenticated state. This does not, however, mean that the long-term memories for the passwords and passwords-related details (such as password reminders and auto fill- ins) should be removed. If a new timeout value is received for the same authentication space, it cancels the previous timeout and sets a new timeout.
The parameter "username" tells us that the only "username" to be accepted by the server is the value given in this parameter.
This parameter is particularly useful, for example, for routers and other network appliances with a Web configuration interface. Many of those use an HTTP Basic authentication with one predefined username, with many varieties such as "admin", "root", "user", etc. In the current situation, users have almost no hint about the valid username upon the authentication request. Some show the valid value in a "realm" string, some in the 401-status response page, shown _after_ the user gave up the authentication and canceled the authentication dialog. If this parameter is given, the client Web browser can auto- fill the username field in the authentication dialog before the users attempt to authenticate themselves.
This parameter MAY be used with authentication-initiating responses or negatively authenticated responses requiring another attempt at authentication. The clients MUST ignore this parameter when a response is either successfully authenticated or intermediately authenticated.
Oiwa, et al. Experimental [Page 17]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
If the authentication scheme to be used has a syntax limitation on the allowed usernames (e.g., Basic and Digest do not allow colons in usernames); the specified value MUST follow that limitation. Clients SHOULD ignore any values that do not conform to such limitations.
Also, if the used authentication scheme requires a specific style of text preparation for the username (e.g., PRECIS [RFC7564] string preparation or Unicode normalization), the server SHOULD send the values satisfying such requirements (so that clients can use the given username as is).
Clients MAY still send any authentication requests with other usernames, possibly in vain. Clients are not required (also not forbidden) to give users opportunities for supplying a username different from the server-specified one. Servers are also not strictly required to reject usernames other than specified, but doing so will usually result in bad user experiences and may confuse users and clients.
Although this parameter is useful in a specific class of use cases, using it in a general use case has many security implications and possible pitfalls. Please consult Section 8.1 before deciding to use this parameter.
This section shows some examples for applying this extension to typical websites that use forms and cookies for managing authentication and authorization. The content of this section is not normative and is for illustrative purposes only.
In these examples, we assume that there are two kinds of clients (Web browsers). One kind of these implements all features described in the previous sections. We also assume that browsers will have a user interface that allows users to deactivate (log out from) current authentication sessions. The other kind are the "existing" implementations that do not support any of these features.
When not explicitly specified, all settings described below are to be applied with Authentication-Control headers, and these can be sent to clients regardless of the authentication status (these will be silently ignored whenever not effective).
Oiwa, et al. Experimental [Page 18]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
This subsection provides an example application for a site whose structure is somewhat similar to conventional portal sites. In particular, most Web pages are available for guest (unauthenticated) users, and, if authentication is performed, the content of these pages is customized for each user. We assume that the site has the following kinds of pages currently:
o Content pages
o Pages/mechanism for performing authentication:
* There is one page that asks for a username and a password using a HTML POST form.
* After the authentication attempt, the user will be redirected to either the page that was previously displayed before the authentication or some specific page.
When such a site does not require specific actions upon login and logout, the following simple settings can be used:
o Set up an optional authentication to all pages available to guests. Set up an Authentication-Control header with the "auth- style=non-modal" setting.
o If there are pages only available to authenticated users, set up a mandatory authentication with the "auth-style=non-modal" setting.
o No specific pages for authentication are needed. It will be performed automatically, directed by the above setting.
o A de-authentication page is also not needed. If the site has one, put "logout-timeout=0" there.
o For all pages for POST requests, it is advisable to have a "location-when-logout=<some page>".
Oiwa, et al. Experimental [Page 19]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
If the site requires specific actions upon logout, the following settings can be used:
o All settings in Case 1 are applied.
o For all pages, set up the Authentication-Control header "location- when-logout=<de-authentication page>".
o In the de-authentication page, no specific setup is needed. If there are any direct links to the de-authentication page, put "logout-timeout=0".
5.1.3. Case 3: Specific Page Displayed before Login
If the site needs to display a specific page before login actions (some announcements, user notices, or even advertisements), the following settings can be applied:
o Set up an optional authentication to all pages available to guests. Set up an Authentication-Control header with "no-auth=true". Put a link to a specific login page in contents.
o If there are pages only available to authenticated users, set up a mandatory authentication with the "location-when-unauthenticated=<the login page>".
o For the specific login page, set up a mandatory authentication.
o For all pages for POST requests, it is advisable to have "location-when-logout=<some page>", too.
o De-authentication pages are not needed. If the site has one, put "logout-timeout=0".
If almost all pages in the target site require authentication (e.g., an Internet banking site), or if there is no need to support both unauthenticated and authenticated users on the same resource, the settings will become simpler. The following are examples for such a site:
o Set up a mandatory authentication to all pages available to authenticated users. Set up an Authentication-Control header with the "auth-style=non-modal" setting.
Oiwa, et al. Experimental [Page 20]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
o Set up a handler for the 401-status that requests users to authenticate.
o For all pages for POST requests, it is advisable to have a "location-when-logout=<some page>", too.
o De-authentication pages are not needed. If the site will have one, put "logout-timeout=0" there.
In current websites using form-based authentication, Cookies [RFC6265] are used for managing both authorization and application sessions. Using the extensions in this document, the former features will be provided by using (extended) HTTP authentication/ authorization mechanisms. In some cases, there will be ambiguity on whether some functions are for authorization management or for session management. The following hints will be helpful for deciding which features to use.
o If there is a need to serve multiple sessions for a single user using multiple browsers concurrently, use a Cookie for distinguishing between sessions for the same user. (C.f. if there is a need to distinguish between sessions in the same browser, HTML5 Web Storage [W3C.REC-webstorage-20130730] features can be used instead of Cookies.)
o If a website is currently deploying a session time-out feature, consider who benefits from the feature. In most cases, the main requirement for such a feature is to protect users from having their consoles and browsers hijacked (i.e., benefits are on the users' side). In such cases, the time-out features provided in this extension can be used. On the other hand, the requirement is to protect the server's privilege (e.g., when some regulations require limiting the time difference between a user's two-factor authentication and financial transaction commitment; the requirement is strictly on the servers' side), that should be managed on the server side using Cookies or other session- management mechanisms.
Oiwa, et al. Experimental [Page 21]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
5.4. Parallel Deployment with Form/Cookie Authentication
In some transition periods, sites may need to support both HTTP-layer and form-based authentication. The following example shows one way to achieve that.
o If Cookies are used even for HTTP-authenticated users, each session determined by Cookies SHOULD identify which authentication has been used for the session.
o First, set up any of the above settings for enabling HTTP-layer authentication.
o For unauthenticated users, add the following things to the Web pages, unless the client supports this extension and HTTP-level authentication:
* For non-mandatory authenticated pages, add a link to the form- based authenticated pages.
* For mandatory authenticated pages, either put a link to form- based authenticated pages or put an HTML-level redirection (using <META http-equiv="refresh" ...> element) to such pages.
o In the form-based authenticated pages, if users are not authenticated, the page can provide a redirection for HTTP-level authentication by the "location-when-unauthenticated" setting.
o Users are identified for authorization and content customization by the following logic:
* First, check the result of the HTTP-level authentication. If there is a Cookie session tied to a specific user, both should match.
* If the user is not authenticated on the HTTP-level, use the conventional form-based method to determine the user.
* If there is a Cookie tied to HTTP authentication but there is no corresponding HTTP authentication result, that session will be discarded (because it means that authentication is deactivated by the corresponding user).
Oiwa, et al. Experimental [Page 22]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
If a private extension to this protocol is implemented, it MUST use the extension-param to avoid conflicts with this protocol and any other extensions. (Standardized extensions or extensions that are being standardized MAY use either bare-tokens or extension-tokens.)
When bare-tokens are used in this protocol, these MUST be allocated by IANA. Any tokens used for non-private, non-experimental parameters are RECOMMENDED to be registered with IANA, regardless of the kind of tokens used.
Extension-tokens MAY be freely used for any non-standard, private, and/or experimental uses. An extension-token MUST use the format "-<bare-token>.<domain-name>", where <domain-name> is a validly registered (sub-)domain name on the Internet owned by the party that defines the extensions. Any unknown parameter name is to be ignored regardless of whether it is an extension-token or a bare-token.
This document defines two new entries for the "Permanent Message Header Field Names" registry.
+-------------+---------------------------+-------------------------+ | | Entry 1: | Entry 2: | +-------------+---------------------------+-------------------------+ | Header | Optional-WWW-Authenticate | Authentication-Control | | Field Name | | | | Protocol | http | http | | Status | experimental | experimental | | Change | IETF | IETF | | Control | | | | Spec. | Section 3 of this | Section 4 of this | | Document | document | document | +-------------+---------------------------+-------------------------+
This document also establishes the "HTTP Authentication Control Parameters" registry. The registry manages case-insensitive ASCII strings. The string MUST follow the extensive-token syntax defined in Section 2.2.
To acquire registered tokens, a specification for the use of such tokens MUST be available as a publicly accessible document (see "Specification Required" in [RFC5226]).
Oiwa, et al. Experimental [Page 23]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Registrations for authentication control parameters are required to include a description of the control extension. New registrations are advised to provide the following information:
o Token: A token used in HTTP headers for identifying the algorithm.
o Specification: A reference for the specification defining the algorithm.
The initial content of this registry is as follows:
+-------------------------------+------------------------------+ | Token | Specification | +-------------------------------+------------------------------+ | auth-style | Section 4.2 of this document | | location-when-unauthenticated | Section 4.3 of this document | | no-auth | Section 4.4 of this document | | location-when-logout | Section 4.5 of this document | | logout-timeout | Section 4.6 of this document | | username | Section 4.7 of this document | +-------------------------------+------------------------------+
The purpose of the logout timeout feature in the Authentication- control header is to protect users of clients from impersonation caused by an attacker having access to the same console. The server application implementers SHOULD be aware that the directive may always be ignored by either malicious clients or clients not supporting this extension. If the purpose of introducing a timeout for an authentication period is to protect server-side resources, this protection MUST be implemented by other means such as HTTP Cookies [RFC6265].
All parameters in the Authentication-Control header SHOULD NOT be used for any security-enforcement purposes. Server-side applications MUST NOT assume that the header will be honored by clients and users.
8.1. Security Implication of the Username Parameter
The "username" parameter sometimes reveals sensitive information about the HTTP server and its configurations that are useful for security attacks. In general, common security practice suggests that any kind of information on the existence/non-existence of a specific username shall not be disclosed before successful authentication. Obviously, the "username" parameter contradicts this practice.
Oiwa, et al. Experimental [Page 24]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Given this background, the use of the "username" parameter SHOULD be strictly limited to cases where all of the following conditions are met:
(1) the valid username is pre-configured and not modifiable (such as root, admin, or similar ones);
(2) the valid username for such an appliance is publicly known (for example, written in a manual document); and
(3) either the valid username for the server is easily guessable by other means (for example, from the model number shown in an unauthenticated page), or the server is accessible only from limited networks.
Most importantly, the "username" parameter SHOULD NOT be used in any case when the valid usernames can be changed/configured by users or administrators.
[RFC7564] Saint-Andre, P. and M. Blanchet, "PRECIS Framework: Preparation, Enforcement, and Comparison of Internationalized Strings in Application Protocols", RFC 7564, DOI 10.17487/RFC7564, May 2015, <http://www.rfc-editor.org/info/rfc7564>.
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Appendix A. (Informative) Applicability of Features for Each Message
This section provides a cross-reference table showing the applicability of the features provided in this specification to each kind of response described in Section 2.1. The table provided in this section is for informative purposes only.
+-------------------+-------+----------+-----------+------+ | | init. | success. | intermed. | neg. | +-------------------+-------+----------+-----------+------+ | Optional auth. | O | n | N | N | | auth-style | O | - | - | O | | loc.-when-unauth. | O | I | I | i | | no-auth | O | I | I | i | | loc.-when-logout | - | O | - | - | | logout-timeout | - | O | - | - | | username | O | - | - | O | +-------------------+-------+----------+-----------+------+
Legends: O = MAY contain; n = SHOULD NOT contain; N = MUST NOT contain i = SHOULD be ignored; I = MUST be ignored; - = meaningless (to be ignored)
Authors' Addresses
Yutaka Oiwa National Institute of Advanced Industrial Science and Technology Information Technology Research Institute Tsukuba Central 1 1-1-1 Umezono Tsukuba-shi, Ibaraki Japan
Email: y.oiwa@aist.go.jp
Hajime Watanabe National Institute of Advanced Industrial Science and Technology Information Technology Research Institute Tsukuba Central 1 1-1-1 Umezono Tsukuba-shi, Ibaraki Japan
Email: h-watanabe@aist.go.jp
Oiwa, et al. Experimental [Page 27]
RFC 8053 HTTP Auth. Ext. for Interactive Clients January 2017
Hiromitsu Takagi National Institute of Advanced Industrial Science and Technology Information Technology Research Institute Tsukuba Central 1 1-1-1 Umezono Tsukuba-shi, Ibaraki Japan
Email: takagi.hiromitsu@aist.go.jp
Kaoru Maeda Lepidum Co. Ltd. Village Sasazuka 3, Suite #602 1-30-3 Sasazuka Shibuya-ku, Tokyo Japan
Email: maeda@lepidum.co.jp
Tatsuya Hayashi Lepidum Co. Ltd. Village Sasazuka 3, Suite #602 1-30-3 Sasazuka Shibuya-ku, Tokyo Japan