Internet Engineering Task Force (IETF) R. Winter Request for Comments: 8386 University of Applied Sciences Augsburg Category: Informational M. Faath ISSN: 2070-1721 Conntac GmbH F. Weisshaar University of Applied Sciences Augsburg May 2018
Privacy Considerations for Protocols Relying on IP Broadcast or Multicast
Abstract
A number of application-layer protocols make use of IP broadcast or multicast messages for functions such as local service discovery or name resolution. Some of these functions can only be implemented efficiently using such mechanisms. When using broadcast or multicast messages, a passive observer in the same broadcast or multicast domain can trivially record these messages and analyze their content. Therefore, designers of protocols that make use of broadcast or multicast messages need to take special care when designing their protocols.
Status of This Memo
This document is not an Internet Standards Track specification; it is published for informational purposes.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Not all documents approved by the IESG are candidates for any level of Internet Standard; see Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8386.
Winter, et al. Informational [Page 1]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Broadcast and multicast messages have a large (and, to the sender, unknown) receiver group by design. Because of that, these two mechanisms are vital for a number of basic network functions such as autoconfiguration and link-layer address lookup. Also, application developers use broadcast/multicast messages to implement things such as local service or peer discovery. It appears that an increasing number of applications make use of it as suggested by experimental results obtained on campus networks, including the IETF meeting network [TRAC2016]. This trend is not entirely surprising. As
Winter, et al. Informational [Page 2]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
[RFC919] puts it, "The use of broadcasts [...] is a good base for many applications". Broadcast and multicast functionality in a subnetwork is therefore important because a lack thereof renders the protocols relying on these mechanisms inoperable [RFC3819].
Using broadcast/multicast can become problematic if the information that is being distributed can be regarded as sensitive or if the information that is distributed by multiple protocols can be correlated in a way that sensitive data can be derived. This is clearly true for any protocol, but broadcast/multicast is special in at least two respects:
(a) The aforementioned large receiver group consists of receivers unknown to the sender. This makes eavesdropping without special privileges or a special location in the network trivial for anybody in the same broadcast/multicast domain.
(b) Encryption is difficult when broadcast/multicast messages are used, because, for instance, a non-trivial key management protocol might be required. When encryption is not used, the content of these messages is easily accessible, making it easy to spoof and replay them.
Given the above, privacy protection for protocols based on broadcast or multicast communication is significantly more difficult compared to unicast communication, and at the same time, invasion of privacy is much easier.
Privacy considerations for IETF-specified protocols have received some attention in the recent past (e.g., [RFC7721] and [RFC7819]). There is also general guidance available for document authors on when and how to include a privacy considerations section in their documents and on how to evaluate the privacy implications of Internet protocols [RFC6973]. RFC 6973 also describes potential threats to privacy in great detail and lists terminology that is also used in this document. In contrast to RFC 6973, this document contains a number of privacy considerations, especially for protocols that rely on broadcast/multicast, that are intended to reduce the likelihood that a broadcast- or multicast-based protocol can be misused to collect sensitive data about devices, users, and groups of users in a broadcast/multicast domain.
The above-mentioned considerations particularly apply to protocols designed outside the IETF for two reasons. First, non-standard protocols will likely not receive operational attention and support in making them more secure, e.g., what DHCP snooping does for DHCP. Because these protocols are typically not documented, network equipment does not provide similar features for them. Second, these
Winter, et al. Informational [Page 3]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
protocols have been designed in isolation, where a set of considerations to follow is useful in the absence of a larger community providing feedback and expertise to improve the protocol. In particular, carelessly designed protocols that use broadcast/ multicast can break privacy efforts at different layers of the protocol stack such as Media Access Control (MAC) address or IP address randomization [RFC4941].
In IPv4, two major types of broadcast addresses exist: limited broadcast and directed broadcast. Section 5.3.5 of [RFC1812] defines limited broadcast as all-ones (255.255.255.255) and defines directed broadcast as the given network prefix of an IP address and the local part of all-ones. Broadcast packets are received by all nodes in a subnetwork. Limited broadcasts never transit a router. The same is true for directed broadcasts by default, but routers may provide an option to do this [RFC2644]. IPv6, on the other hand, does not provide broadcast addresses but relies solely on multicast [RFC4291].
In contrast to broadcast addresses, multicast addresses represent an identifier for a set of interfaces that can be a set different from all nodes in the subnetwork. All interfaces that are identified by a given multicast address receive packets destined towards that address and are called a "multicast group". In both IPv4 and IPv6, multiple pre-defined multicast addresses exist. The ones most relevant for this document are the ones with subnet scope. For IPv4, an IP prefix called the "Local Network Control Block" (224.0.0.0/24, defined in Section 4 of [RFC5771]) is reserved for this purpose. For IPv6, the relevant multicast addresses are the two All Nodes Addresses, which every IPv6-capable host is required to recognize as identifying itself (see Section 2.7.1 of [RFC4291]).
Typical usage of these addresses includes local service discovery (e.g., Multicast DNS (mDNS) [RFC6762] and Link-Local Multicast Name Resolution (LLMNR) [RFC4795] make use of multicast), autoconfiguration (e.g., DHCPv4 [RFC2131] uses broadcasts, and DHCPv6 [RFC3315] uses multicast addresses), and other vital network services such as address resolution or duplicate address detection. Aside from these core network functions, applications also make use of broadcast and multicast functionality, often implementing proprietary protocols. In sum, these protocols distribute a diverse set of potentially privacy-sensitive information to a large receiver group, and the only requirement to be part of this receiver group is to be on the same subnetwork.
Winter, et al. Informational [Page 4]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
There are a few obvious and a few not necessarily obvious things that designers of protocols utilizing broadcast/multicast should consider in respect to the privacy implications for their protocol. Most of these items are based on protocol behavior observed as part of experiments on operational networks [TRAC2016].
Frequent broadcast/multicast traffic caused by an application can give away user behavior and online connection times. This allows a passive observer to potentially deduce a user's current activity (e.g., a game) and to create an online profile (i.e., times the user is on the network). This profile becomes more accurate as the frequency of messages and the time duration over which they are sent increases. Given that broadcast/multicast messages are only visible in the same broadcast/multicast domain, these messages also give away the rough location of the user (e.g., a campus or building).
This behavior has, for example, been observed by a synchronization mechanism of a popular application, where multiple messages have been sent per minute via broadcast. Given this behavior, it is possible to record a device's time on the network with a sub-minute accuracy given only the traffic of this single application installed on the device. Also, services used for local name resolution in modern operating systems utilize broadcast- or multicast-based protocols (e.g., mDNS, LLMNR, or NetBIOS) to announce, for example, resources on a regular basis. This also allows tracking of the online times of a device.
If a protocol relies on frequent or periodic broadcast/multicast messages, the frequency SHOULD be chosen conservatively, in particular if the messages contain persistent identifiers (see Section 2.2). Also, intelligent message suppression mechanisms such as the ones employed in mDNS [RFC6762] SHOULD be implemented. The lower the frequency of broadcast messages, the harder passive traffic analysis and surveillance becomes.
Winter, et al. Informational [Page 5]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
A few protocols that make use of broadcast/multicast messages observed in the wild also make use of persistent identifiers. This includes the use of host names or more abstract persistent identifiers such as a Universally Unique Identifiers (UUIDs) or similar. These IDs, which, for example, identify the installation of a certain application, might not change across updates of the software and can therefore be extremely long lived. This allows a passive observer to track a user precisely if broadcast/multicast messages are frequent. This is even true if the IP and/or MAC address changes. Such identifiers also allow two different interfaces (e.g., Wi-Fi and Ethernet) to be correlated to the same device. If the application makes use of persistent identifiers for multiple installations of the same application for the same user, this even allows a passive observer to infer that different devices belong to the same user.
The aforementioned broadcast messages from a synchronization mechanism of a popular application also included a persistent identifier in every broadcast. This identifier never changed after the application was installed, which allowed for the tracking of a device even when it changed its network interface or when it connected to a different network.
In general, persistent IDs are considered bad practice for broadcast and multicast communication, as persistent application-layer IDs will make efforts to randomize identifiers (e.g., [RANDOM-ADDR]) on lower layers useless. When protocols that make use of broadcast/multicast need to make use of IDs, these IDs SHOULD be rotated frequently to make user tracking more difficult.
A large number of users name their device after themselves, either using their first name, last name, or both. Often, a host name includes the type, model, or maker of a device, its function, or language-specific information. Based on data gathered during experiments performed at IETF meetings and at a large campus network, this appears to be the currently prevalent user behavior [TRAC2016]. For protocols using the host name as part of the messages, this clearly will reveal personally identifiable information to everyone on the local network. This information can also be used to mount more sophisticated attacks, e.g., when the owner of a device is identified (as an interesting target) or properties of the device are known (e.g., known vulnerabilities). Host names are also a type of persistent identifier; therefore, the considerations in Section 2.2 apply.
Winter, et al. Informational [Page 6]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
Some of the most commonly used operating systems include the name the user chooses for the user account during the installation process as part of the host name of the device. The name of the operating system can also be included, therefore revealing two pieces of information that can be regarded as private information if the host name is used in broadcast/multicast messages.
Where possible, the use of host names and other user-provided information in protocols making use of broadcast/multicast SHOULD be avoided. An application might want to display the information it will broadcast on the LAN at install/config time, so that the user is at least aware of the application's behavior. More host name considerations can be found in [RFC8117]. More information on user participation can be found in [RFC6973].
A large number of services and applications make use of the broadcast/multicast mechanism. That means there are various sources of information that are easily accessible by a passive observer. In isolation, the information these protocols reveal might seem harmless, but given multiple such protocols, it might be possible to correlate this information. For example, a protocol that uses frequent messages including a UUID to identify the particular installation does not give away the identity of the user. However, a single message including the user's host name might do that, and it can be correlated using, for example, the MAC address of the device's interface.
In the experiments described in [TRAC2016], it was possible to correlate frequently sent broadcast messages that included a unique identifier with other broadcast/multicast messages containing usernames (e.g. mDNS, LLMNR, or NetBIOS); this revealed relationships among users. This allowed the real identity of the users of many devices to be revealed, and it also gave away some information about their social environment.
A designer of a protocol that makes use of broadcast/multicast needs to be aware of the fact that even if the information a protocol leaks seems harmless in isolation, there might be ways to correlate that information with information from other protocols to reveal sensitive information about a user.
A lot of applications and services relying on broadcast- or multicast-based protocols do not include the means to declare "safe" environments (e.g., based on the Service Set Identifier (SSID) of a
Winter, et al. Informational [Page 7]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
Wi-Fi network and the MAC addresses of the access points). For example, a device connected to a public Wi-Fi network will likely broadcast the same information as when connected to the home network. It would be beneficial if certain behaviors could be restricted to "safe" environments.
For example, a popular operating system allows the user to specify the trust level of the network the device connects to, which, for example, restricts specific system services (using broadcast/ multicast messages for their normal operation) to be used in trusted networks only. Such functionality could be implemented as part of an application.
An application developer making use of broadcast/multicast messages as part of the application SHOULD, if possible, make the broadcast feature configurable so that potentially sensitive information does not leak on public networks where the threat to privacy is much larger.
Besides changing end-user behavior, choosing sensible defaults as an operating system vendor (e.g., for suggesting host names), and following the considerations for protocol designers mentioned in this document, there is something that the network administrators/ operators can do to limit the above-mentioned problems.
A feature commonly found on access points is the ability to manage/ filter broadcast and multicast traffic. This will potentially break certain applications or some of their functionality but will also protect the users from potentially leaking sensitive information. Wireless access points often provide finer-grained control beyond a simple on/off switch for well-known protocols or provide mechanisms to manage broadcast/multicast traffic intelligently using, for example, proxies (see [MCAST-CONS]). However, these mechanisms only work on standardized protocols.
Increasingly, applications rely on protocols that send and receive broadcast and multicast messages. For some, broadcast/multicast messages are the basis of their application logic; others use broadcast/multicast messages to improve certain aspects of the application but are fully functional in case broadcast/multicast messages fail. Irrespective of the role of broadcast and multicast messages for the application, the designers of protocols that make use of them should be very careful in their protocol design because of the special nature of broadcast and multicast.
Winter, et al. Informational [Page 8]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
It is not always possible to implement certain functionality via unicast, but if a protocol designer chooses to rely on broadcast/ multicast, the following should be carefully considered:
o IETF-specified protocols, such as mDNS [RFC6762], SHOULD be used if possible as operational support might exist to protect against the leakage of private information. Also, for some protocols, privacy extensions are being specified; these can be used if implemented. For example, for DNS-SD, privacy extensions are documented in [DNSSD-PRIV].
o Using user-specified information inside broadcast/multicast messages SHOULD be avoided, as users will often use personal information or other information that aids attackers, in particular if the user is unaware about how that information is being used.
o The use of persistent IDs in messages SHOULD be avoided, as this allows user tracking and correlation, and it potentially has a devastating effect on other privacy-protection mechanisms.
o If one must design a new protocol relying on broadcast/multicast and cannot use an IETF-specified protocol, then:
* the protocol SHOULD be very conservative in how frequently it sends messages as an effort in data minimization,
* it SHOULD make use of mechanisms implemented in IETF-specified protocols that can be helpful in privacy protection, such as message suppression in mDNS,
* it SHOULD be designed in such a way that information sent in broadcast/multicast messages cannot be correlated with information from other protocols using broadcast/multicast, and
* it SHOULD be possible to let the user configure "safe" environments if possible (e.g., based on the SSID) to minimize the risk of information leakage (e.g., a home network as opposed to a public Wi-Fi network).
Besides privacy implications, frequent broadcasting also represents a performance problem. In particular, in certain wireless technologies such as 802.11, broadcast and multicast are transmitted at a much lower rate (the lowest common denominator rate) compared to unicast and therefore have a much bigger impact on the overall available airtime [MCAST-CONS]. Further, it will limit the ability for devices
Winter, et al. Informational [Page 9]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
to go to sleep if frequent broadcasts are being sent. A similar problem in respect to Router Advertisements is addressed in [RFC7772]. In that respect, broadcast/multicast can be used for another class of attacks that is not related to privacy. The potential impact on network performance should nevertheless be considered when designing a protocol that makes use of broadcast/ multicast.
This document deals with privacy-related considerations for broadcast- and multicast-based protocols. It contains advice for designers of such protocols to minimize the leakage of privacy- sensitive information. The intent of the advice is to make sure that identities will remain anonymous and user tracking will be made difficult.
To protect multicast traffic, certain applications can make use of existing mechanisms, such as the ones defined in [RFC5374]. Examples of such applications can be found in Appendix A of [RFC5374]. However, given the assumptions about these applications and the required security infrastructure, many applications will not be able to make use of such mechanisms.
[DNSSD-PRIV] Huitema, C. and D. Kaiser, "Privacy Extensions for DNS- SD", Work in Progress, draft-ietf-dnssd-privacy-04, April 2018.
Winter, et al. Informational [Page 10]
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
[MCAST-CONS] Perkins, C., McBride, M., Stanley, D., Kumari, W., and J. Zuniga, "Multicast Considerations over IEEE 802 Wireless Media", Work in Progress, draft-ietf-mboned-ieee802-mcast- problems-01, February 2018.
[RANDOM-ADDR] Huitema, C., "Implications of Randomized Link Layers Addresses for IPv6 Address Assignment", Work in Progress, draft-huitema-6man-random-addresses-03, March 2016.
[RFC3819] Karn, P., Ed., Bormann, C., Fairhurst, G., Grossman, D., Ludwig, R., Mahdavi, J., Montenegro, G., Touch, J., and L. Wood, "Advice for Internet Subnetwork Designers", BCP 89, RFC 3819, DOI 10.17487/RFC3819, July 2004, <https://www.rfc-editor.org/info/rfc3819>.
RFC 8386 Broadcast/Multicast Privacy Considerations May 2018
[TRAC2016] Faath, M., Weisshaar, F., and R. Winter, "How Broadcast Data Reveals Your Identity and Social Graph", Wireless Communications and Mobile Computing Conference (IWCMC), International Workshop on TRaffic Analysis and Characterization (TRAC), DOI 10.1109/IWCMC.2016.7577084, September 2016.
Acknowledgments
We would like to thank Eliot Lear, Joe Touch, and Stephane Bortzmeyer for their valuable input to this document.
This work was partly supported by the European Commission under grant agreement FP7-318627 mPlane. Support does not imply endorsement.
Authors' Addresses
Rolf Winter University of Applied Sciences Augsburg Augsburg Germany
Email: rolf.winter@hs-augsburg.de
Michael Faath Conntac GmbH Augsburg Germany
Email: faath@conntac.net
Fabian Weisshaar University of Applied Sciences Augsburg Augsburg Germany