Internet Engineering Task Force (IETF) R. Housley Request for Comments: 8419 Vigil Security Category: Standards Track August 2018 ISSN: 2070-1721
Use of Edwards-Curve Digital Signature Algorithm (EdDSA) Signatures in the Cryptographic Message Syntax (CMS)
Abstract
This document specifies the conventions for using the Edwards-curve Digital Signature Algorithm (EdDSA) for curve25519 and curve448 in the Cryptographic Message Syntax (CMS). For each curve, EdDSA defines the PureEdDSA and HashEdDSA modes. However, the HashEdDSA mode is not used with the CMS. In addition, no context string is used with the CMS.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8419.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Housley Standards Track [Page 1]
RFC 8419 Using EdDSA Signatures with CMS August 2018
This document specifies the conventions for using the Edwards-curve Digital Signature Algorithm (EdDSA) [RFC8032] for curve25519 [CURVE25519] and curve448 [CURVE448] with the Cryptographic Message Syntax (CMS) [RFC5652] signed-data content type. For each curve, [RFC8032] defines the PureEdDSA and HashEdDSA modes; however, the HashEdDSA mode is not used with the CMS. In addition, no context string is used with CMS. EdDSA with curve25519 is referred to as "Ed25519", and EdDSA with curve448 is referred to as "Ed448". The CMS conventions for PureEdDSA with Ed25519 and Ed448 are described in this document.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
The Edwards-curve Digital Signature Algorithm (EdDSA) [RFC8032] is a variant of Schnorr's signature system with (possibly twisted) Edwards curves. Ed25519 is intended to operate at around the 128-bit security level; Ed448 is intended to operate at around the 224-bit security level.
One of the parameters of the EdDSA algorithm is the "prehash" function. This may be the identity function, resulting in an algorithm called "PureEdDSA", or a collision-resistant hash function, resulting in an algorithm called "HashEdDSA". In most situations, the CMS SignedData includes signed attributes, including the message digest of the content. Since HashEdDSA offers no benefit when signed attributes are present, only PureEdDSA is used with the CMS.
The EdDSA signature algorithm is defined in [RFC8032], and the conventions for encoding the public key are defined in [RFC8410].
The id-Ed25519 and id-Ed448 object identifiers are used to identify EdDSA public keys in certificates. The object identifiers are specified in [RFC8410], and they are repeated here for convenience:
sigAlg-Ed25519 ALGORITHM ::= { OID id-Ed25519 }
sigAlg-Ed448 ALGORITHM ::= { OID id-Ed448 }
id-Ed25519 OBJECT IDENTIFIER ::= { 1 3 101 112 }
id-Ed448 OBJECT IDENTIFIER ::= { 1 3 101 113 }
Housley Standards Track [Page 3]
RFC 8419 Using EdDSA Signatures with CMS August 2018
When the signer includes signed attributes, a message digest algorithm is used to compute the message digest on the eContent value. When signing with Ed25519, the message digest algorithm MUST be SHA-512 [FIPS180]. Additional information on SHA-512 is available in [RFC6234]. When signing with Ed448, the message digest algorithm MUST be SHAKE256 [FIPS202] with a 512-bit output value.
Signing with Ed25519 uses SHA-512 as part of the signing operation, and signing with Ed448 uses SHAKE256 as part of the signing operation.
For convenience, the object identifiers and parameter syntax for these algorithms are repeated here:
hashAlg-SHA-512 ALGORITHM ::= { OID id-sha512 }
hashAlg-SHAKE256 ALGORITHM ::= { OID id-shake256 } hashAlg-SHAKE256-LEN ALGORITHM ::= { OID id-shake256-len PARMS ShakeOutputLen }
ShakeOutputLen ::= INTEGER -- Output length in bits
When using the id-sha512 or id-shake256 algorithm identifier, the parameters MUST be absent.
When using the id-shake256-len algorithm identifier, the parameters MUST be present, and the parameter MUST contain 512, encoded as a positive integer value.
The id-Ed25519 and id-Ed448 object identifiers are also used for signature values. When used to identify signature algorithms, the AlgorithmIdentifier parameters field MUST be absent.
Housley Standards Track [Page 4]
RFC 8419 Using EdDSA Signatures with CMS August 2018
The data to be signed is processed using PureEdDSA, and then a private key operation generates the signature value. As described in Section 3.3 of [RFC8032], the signature value is the opaque value ENC(R) || ENC(S), where || represents concatenation. As described in Section 5.3 of [RFC5652], the signature value is ASN.1 encoded as an OCTET STRING and included in the signature field of SignerInfo.
The processing depends on whether the signer includes signed attributes.
The inclusion of signed attributes is preferred, but the conventions for signed-data without signed attributes are provided for completeness.
3.1. Signed-data Conventions with Signed Attributes
The SignedData digestAlgorithms field includes the identifiers of the message digest algorithms used by one or more signer. There MAY be any number of elements in the collection, including zero. When signing with Ed25519, the digestAlgorithm SHOULD include id-sha512, and if present, the algorithm parameters field MUST be absent. When signing with Ed448, the digestAlgorithm SHOULD include id-shake256-len, and if present, the algorithm parameters field MUST also be present, and the parameter MUST contain 512, encoded as a positive integer value.
The SignerInfo digestAlgorithm field includes the identifier of the message digest algorithms used by the signer. When signing with Ed25519, the digestAlgorithm MUST be id-sha512, and the algorithm parameters field MUST be absent. When signing with Ed448, the digestAlgorithm MUST be id-shake256-len, the algorithm parameters field MUST be present, and the parameter MUST contain 512, encoded as a positive integer value.
The SignerInfo signedAttributes MUST include the message-digest attribute as specified in Section 11.2 of [RFC5652]. When signing with Ed25519, the message-digest attribute MUST contain the message digest computed over the eContent value using SHA-512. When signing with Ed448, the message-digest attribute MUST contain the message digest computed over the eContent value using SHAKE256 with an output length of 512 bits.
The SignerInfo signatureAlgorithm field MUST contain either id-Ed25519 or id-Ed448, depending on the elliptic curve that was used by the signer. The algorithm parameters field MUST be absent.
Housley Standards Track [Page 5]
RFC 8419 Using EdDSA Signatures with CMS August 2018
The SignerInfo signature field contains the octet string resulting from the EdDSA private key signing operation.
3.2. Signed-data Conventions without Signed Attributes
The SignedData digestAlgorithms field includes the identifiers of the message digest algorithms used by one or more signer. There MAY be any number of elements in the collection, including zero. When signing with Ed25519, the list of identifiers MAY include id-sha512, and if present, the algorithm parameters field MUST be absent. When signing with Ed448, the list of identifiers MAY include id-shake256, and if present, the algorithm parameters field MUST be absent.
The SignerInfo digestAlgorithm field includes the identifier of the message digest algorithms used by the signer. When signing with Ed25519, the digestAlgorithm MUST be id-sha512, and the algorithm parameters field MUST be absent. When signing with Ed448, the digestAlgorithm MUST be id-shake256, and the algorithm parameters field MUST be absent.
NOTE: Either id-sha512 or id-shake256 is used as part to the private key signing operation. However, the private key signing operation does not take a message digest computed with one of these algorithms as an input.
The SignerInfo signatureAlgorithm field MUST contain either id-Ed25519 or id-Ed448, depending on the elliptic curve that was used by the signer. The algorithm parameters field MUST be absent.
The SignerInfo signature field contains the octet string resulting from the EdDSA private key signing operation.
The EdDSA specification [RFC8032] includes the following warning. It deserves highlighting, especially when signed-data is used without signed attributes and the content to be signed might be quite large:
PureEdDSA requires two passes over the input. Many existing APIs, protocols, and environments assume digital signature algorithms only need one pass over the input and may have API or bandwidth concerns supporting anything else.
Implementations must protect the EdDSA private key. Compromise of the EdDSA private key may result in the ability to forge signatures.
Housley Standards Track [Page 6]
RFC 8419 Using EdDSA Signatures with CMS August 2018
The generation of EdDSA private key relies on random numbers. The use of inadequate pseudo-random number generators (PRNGs) to generate these values can result in little or no security. An attacker may find it much easier to reproduce the PRNG environment that produced the keys, searching the resulting small set of possibilities, rather than brute-force searching the whole key space. The generation of quality random numbers is difficult. RFC 4086 [RANDOM] offers important guidance in this area.
Unlike DSA and Elliptic Curve Digital Signature Algorithm (ECDSA), EdDSA does not require the generation of a random value for each signature operation.
Using the same private key with different algorithms has the potential to leak extra information about the private key to an attacker. For this reason, the same private key SHOULD NOT be used with more than one set of EdDSA parameters, although it appears that there are no security concerns when using the same private key with PureEdDSA and HashEdDSA [RFC8032].
When computing signatures, the same hash function SHOULD be used for all operations. This reduces the number of failure points in the signature process.
[FIPS180] National Institute of Standards and Technology, "Secure Hash Standard (SHS)", FIPS PUB 180-4, DOI 10.6028/NIST.FIPS.180-4, August 2015.
[FIPS202] National Institute of Standards and Technology, "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions", FIPS PUB 202, DOI 10.6028/NIST.FIPS.202, August 2015.
[RFC8410] Josefsson, S. and J. Schaad, "Algorithm Identifiers for Ed25519, Ed448, X25519, and X448 for Use in the Internet X.509 Public Key Infrastructure", RFC 8410, DOI 10.17487/RFC8410, August 2018, <https://www.rfc-editor.org/info/rfc8410>.
[X680] ITU-T, "Information technology -- Abstract Syntax Notation One (ASN.1): Specification of basic notation", ITU-T Recommendation X.680, ISO/IEC 8824-1, August 2015, <https://www.itu.int/rec/T-REC-X.680/en>.
RFC 8419 Using EdDSA Signatures with CMS August 2018
Acknowledgements
Many thanks to Jim Schaad, Daniel Migault, and Adam Roach for the careful review and comments. Thanks to Quynh Dang for coordinating the object identifiers assignment by NIST.
Author's Address
Russ Housley 918 Spring Knoll Drive Herndon, VA 20170 United States of America