RFC 9209




Internet Engineering Task Force (IETF)                     M. Nottingham
Request for Comments: 9209                                        Fastly
Category: Standards Track                                      P. Sikora
ISSN: 2070-1721                                                   Google
                                                               June 2022


              The Proxy-Status HTTP Response Header Field

Abstract



   This document defines the Proxy-Status HTTP response field to convey
   the details of an intermediary's response handling, including
   generated errors.

Status of This Memo



   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9209.

Copyright Notice



   Copyright (c) 2022 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents



   1.  Introduction
     1.1.  Notational Conventions
   2.  The Proxy-Status HTTP Field
     2.1.  Proxy-Status Parameters
       2.1.1.  error
       2.1.2.  next-hop
       2.1.3.  next-protocol
       2.1.4.  received-status
       2.1.5.  details
     2.2.  Defining New Proxy-Status Parameters
     2.3.  Proxy Error Types
       2.3.1.  DNS Timeout
       2.3.2.  DNS Error
       2.3.3.  Destination Not Found
       2.3.4.  Destination Unavailable
       2.3.5.  Destination IP Prohibited
       2.3.6.  Destination IP Unroutable
       2.3.7.  Connection Refused
       2.3.8.  Connection Terminated
       2.3.9.  Connection Timeout
       2.3.10. Connection Read Timeout
       2.3.11. Connection Write Timeout
       2.3.12. Connection Limit Reached
       2.3.13. TLS Protocol Error
       2.3.14. TLS Certificate Error
       2.3.15. TLS Alert Received
       2.3.16. HTTP Request Error
       2.3.17. HTTP Request Denied
       2.3.18. HTTP Incomplete Response
       2.3.19. HTTP Response Header Section Too Large
       2.3.20. HTTP Response Header Field Line Too Large
       2.3.21. HTTP Response Body Too Large
       2.3.22. HTTP Response Trailer Section Too Large
       2.3.23. HTTP Response Trailer Field Line Too Large
       2.3.24. HTTP Response Transfer-Coding Error
       2.3.25. HTTP Response Content-Coding Error
       2.3.26. HTTP Response Timeout
       2.3.27. HTTP Upgrade Failed
       2.3.28. HTTP Protocol Error
       2.3.29. Proxy Internal Response
       2.3.30. Proxy Internal Error
       2.3.31. Proxy Configuration Error
       2.3.32. Proxy Loop Detected
     2.4.  Defining New Proxy Error Types
   3.  IANA Considerations
   4.  Security Considerations
   5.  References
     5.1.  Normative References
     5.2.  Informative References

   Authors' Addresses



1.  Introduction



   HTTP intermediaries (see Section 3.7 of [HTTP]) -- including both
   forward proxies and gateways (also known as "reverse proxies") --
   have become an increasingly significant part of HTTP deployments.  In
   particular, reverse proxies and content delivery networks (CDNs) form
   part of the critical infrastructure of many websites.

   Typically, HTTP intermediaries forward requests towards the origin
   server (inbound) and then forward their responses back to clients
   (outbound).  However, if an error occurs before a response is
   obtained from an inbound server, the response is often generated by
   the intermediary itself.

   HTTP accommodates these types of errors with a few status codes --
   for example, 502 (Bad Gateway) and 504 (Gateway Timeout).  However,
   experience has shown that more information is necessary to aid
   debugging and communicate what's happened to the client.
   Additionally, intermediaries sometimes want to convey additional
   information about their handling of a response, even if they did not
   generate it.

   To enable these uses, Section 2 defines a new HTTP response field to
   allow intermediaries to convey details of their handling of a
   response.  Section 2.1 enumerates the information that can be added
   to the field by intermediaries, which can be extended per
   Section 2.2.  Section 2.3 defines a set of error types for use when a
   proxy encounters an issue when obtaining a response for the request;
   these can likewise be extended per Section 2.4.

1.1.  Notational Conventions



   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   This document uses the following terminology from Section 3 of
   [STRUCTURED-FIELDS] to specify syntax and parsing: List, String,
   Token, Integer, and Byte Sequence.

   Note that in this specification, "proxy" is used to indicate both
   forward and reverse proxies, otherwise known as gateways.  "Next hop"
   indicates the connection in the direction leading to the origin
   server for the request.

2.  The Proxy-Status HTTP Field



   The Proxy-Status HTTP response field allows an intermediary to convey
   additional information about its handling of a response and its
   associated request.

   Its value is a List (see Section 3.1 of [STRUCTURED-FIELDS]).  Each
   member of the List represents an intermediary that has handled the
   response.  The first member represents the intermediary closest to
   the origin server, and the last member represents the intermediary
   closest to the user agent.

   For example:

   Proxy-Status: revproxy1.example.net, ExampleCDN

   indicates that this response was handled first by
   revproxy1.example.net (a reverse proxy adjacent to the origin server)
   and then ExampleCDN.

   Intermediaries determine when it is appropriate to add the Proxy-
   Status field to a response.  Some might decide to append it to all
   responses, whereas others might only do so when specifically
   configured to or when the request contains a header field that
   activates a debugging mode.

   Each member of the List identifies the intermediary that inserted the
   value and MUST have a type of either String or Token.  Depending on
   the deployment, this might be a service name (but not a software or
   hardware product name; e.g., "ExampleCDN" is appropriate, but
   "ExampleProxy" is not because it doesn't identify the deployment), a
   hostname ("proxy-3.example.com"), an IP address, or a generated
   string.

   Parameters of each member (per Section 3.1.2 of [STRUCTURED-FIELDS])
   convey additional information about that intermediary's handling of
   the response and its associated request; see Section 2.1.  While all
   of these parameters are OPTIONAL, intermediaries are encouraged to
   provide as much information as possible (but see Section 4 for
   security considerations in doing so).

   When adding a value to the Proxy-Status field, intermediaries SHOULD
   preserve the existing members of the field to allow debugging of the
   entire chain of intermediaries handling the request unless explicitly
   configured to remove them (e.g., to prevent internal network details
   from leaking; see Section 4).

   Origin servers MUST NOT generate the Proxy-Status field.

   Proxy-Status MAY be sent as an HTTP trailer field.  For example, if
   an intermediary is streaming a response and the inbound connection
   suddenly terminates, Proxy-Status can only be appended to the trailer
   section of the outbound message since the header section has already
   been sent.  However, because it might be silently discarded along the
   path to the user agent (as is the case for all trailer fields; see
   Section 6.5 of [HTTP]), Proxy-Status SHOULD NOT be sent as a trailer
   field unless it is not possible to send it in the header section.

   To allow recipients to reconstruct the relative ordering of Proxy-
   Status members conveyed in trailer fields with those conveyed in
   header fields, an intermediary MUST NOT send Proxy-Status as a
   trailer field unless it has also generated a Proxy-Status header
   field with the same member (although potentially different
   parameters) in that message.

   For example, a proxy identified as 'ThisProxy' that receives a
   response bearing a header field:

   Proxy-Status: SomeOtherProxy

   would add its own entry to the header field:

   Proxy-Status: SomeOtherProxy, ThisProxy

   thus allowing it to append a trailer field:

   Proxy-Status: ThisProxy; error=read_timeout

   which would thereby allow a downstream recipient to understand that
   processing by 'SomeOtherProxy' occurred before 'ThisProxy'.

   A client MAY promote the Proxy-Status trailer field into a header
   field by following these steps:

   1.  For each member trailer_member of the Proxy-Status trailer field
       value:

       1.  Let header_member be the first (leftmost) value of the Proxy-
           Status header field value, comparing the String or Token
           character by character without consideration of parameters.

       2.  If no matching header_member is found, continue processing
           the next trailer_member.

       3.  Replace header_member with trailer_member in its entirety,
           including any parameters.



   2.  Remove the Proxy-Status trailer field if empty.

2.1.  Proxy-Status Parameters



   This section lists parameters that can be used on the members of the
   Proxy-Status field.  Unrecognised parameters MUST be ignored.

2.1.1.  error



   The error parameter's value is a Token that is a proxy error type.
   When present, it indicates that the intermediary encountered an issue
   when obtaining this response.

   The presence of some proxy error types indicates that the response
   was generated by the intermediary itself, rather than being forwarded
   from the origin server.  This is the case when, for example, the
   origin server can't be contacted, so the proxy has to create its own
   response.

   Other proxy error types can be added to (potentially partial)
   responses that were generated by the origin server or some other
   inbound server.  For example, if the forward connection abruptly
   closes, an intermediary might add Proxy-Status with an appropriate
   error as a trailer field.

   Proxy error types that are registered with a 'Response only generated
   by intermediaries' value of 'true' indicate that they can only occur
   in responses generated by the intermediary.  If the value is 'false',
   the response might be generated by the intermediary or an inbound
   server.

   Section 2.3 lists the proxy error types defined in this document; new
   ones can be defined using the procedure outlined in Section 2.4.

   For example:

   HTTP/1.1 504 Gateway Timeout
   Proxy-Status: ExampleCDN; error=connection_timeout

   indicates that this 504 response was generated by ExampleCDN due to a
   connection timeout when going forward.

   Or:

   HTTP/1.1 429 Too Many Requests
   Proxy-Status: r34.example.net; error=http_request_error, ExampleCDN

   indicates that this 429 (Too Many Requests) response was generated by
   r34.example.net, not the CDN or the origin.

   When sending the error parameter, the most specific proxy error type
   SHOULD be sent, provided that it accurately represents the error
   condition.  If an appropriate proxy error type is not defined, there
   are a number of generic error types (e.g., proxy_internal_error,
   http_protocol_error) that can be used.  If they are not suitable,
   consider registering a new proxy error type (see Section 2.4).

   Each proxy error type has a recommended HTTP status code.  When
   generating an HTTP response containing the error, its HTTP status
   code SHOULD be set to the recommended HTTP status code.  However,
   there may be circumstances (e.g., for backwards compatibility with
   previous behaviours, a status code has already been sent) when
   another status code might be used.

   Proxy error types can also define any number of extra parameters for
   use with that type.  Their use, like all parameters, is optional.  As
   a result, if an extra parameter is used with a proxy error type for
   which it is not defined, it will be ignored.

2.1.2.  next-hop



   The next-hop parameter's value is a String or Token that identifies
   the intermediary or origin server selected (and used, if contacted)
   to obtain this response.  It might be a hostname, IP address, or
   alias.

   For example:

   Proxy-Status: cdn.example.org; next-hop=backend.example.org:8001

   indicates that cdn.example.org used backend.example.org:8001 as the
   next hop for this request.

2.1.3.  next-protocol



   The next-protocol parameter's value indicates the Application-Layer
   Protocol Negotiation (ALPN) protocol identifier [RFC7301] of the
   protocol used by the intermediary to connect to the next hop when
   obtaining this response.

   The value MUST be either a Token or Byte Sequence representing a TLS
   ALPN Protocol ID (see <https://www.iana.org/assignments/tls-
   extensiontype-values#alpn-protocol-ids>).  If the protocol identifier
   is able to be expressed as a Token using ASCII encoding, that form
   MUST be used.

   For example:

   Proxy-Status: "proxy.example.org"; next-protocol=h2

   Note that the ALPN identifier is being used here to identify the
   protocol in use; it may or may not have been actually used in the
   protocol negotiation.

2.1.4.  received-status



   The received-status parameter's value indicates the HTTP status code
   that the intermediary received from the next-hop server when
   obtaining this response.

   The value MUST be an Integer.

   For example:

   Proxy-Status: ExampleCDN; received-status=200

2.1.5.  details



   The details parameter's value is a String containing additional
   information not captured anywhere else.  This can include
   implementation-specific or deployment-specific information.

   For example:

   Proxy-Status: proxy.example.net; error="http_protocol_error";
                 details="Malformed response header: space before colon"

2.2.  Defining New Proxy-Status Parameters



   New Proxy-Status parameters can be defined by registering them in the
   "HTTP Proxy-Status Parameters" registry.

   Registration requests are reviewed and approved by Expert Review, per
   [RFC8126], Section 4.5.  A specification document is appreciated but
   not required.

   The expert(s) should consider the following factors when evaluating
   requests:

   *  Community feedback

   *  If the value is sufficiently well defined

   *  Generic parameters are preferred over vendor-specific,
      application-specific, or deployment-specific values.  If a generic
      value cannot be agreed upon in the community, the parameter's name
      should be correspondingly specific (e.g., with a prefix that
      identifies the vendor, application, or deployment).

   *  Parameter names should not conflict with registered extra
      parameters in the "HTTP Proxy Error Types" registry.

   Registration requests should use the following template:

   Name:  [a name for the Proxy-Status parameter that matches key]

   Description:  [a description of the parameter semantics and value]

   Reference:  [to a specification defining this parameter; optional]

   See the registry at <https://www.iana.org/assignments/http-proxy-
   status> for details on where to send registration requests.

2.3.  Proxy Error Types



   This section lists the proxy error types defined by this document.
   See Section 2.4 for information about defining new proxy error types.

   Note that implementations might not produce all proxy error types.
   The set of types below is designed to map to existing states in
   implementations and therefore may not be applicable to some.

2.3.1.  DNS Timeout



   Name:  dns_timeout

   Description:  The intermediary encountered a timeout when trying to
      find an IP address for the next-hop hostname.

   Extra Parameters:  None

   Recommended HTTP Status Code:  504

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.2.  DNS Error



   Name:  dns_error

   Description:  The intermediary encountered a DNS error when trying to
      find an IP address for the next-hop hostname.

   Extra Parameters:

      rcode:  A String conveying the DNS RCODE that indicates the error
         type.  See [RFC8499], Section 3.

      info-code:  An Integer conveying the Extended DNS Error Code INFO-
         CODE.  See [RFC8914].

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.3.  Destination Not Found



   Name:  destination_not_found

   Description:  The intermediary cannot determine the appropriate next
      hop to use for this request; for example, it may not be
      configured.  Note that this error is specific to gateways, which
      typically require specific configuration to identify the "backend"
      server; forward proxies use in-band information to identify the
      origin server.

   Extra Parameters:  None

   Recommended HTTP Status Code:  500

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.4.  Destination Unavailable



   Name:  destination_unavailable

   Description:  The intermediary considers the next hop to be
      unavailable; e.g., recent attempts to communicate with it may have
      failed, or a health check may indicate that it is down.

   Extra Parameters:  None

   Recommended HTTP Status Code:  503

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.5.  Destination IP Prohibited



   Name:  destination_ip_prohibited

   Description:  The intermediary is configured to prohibit connections
      to the next-hop IP address.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.6.  Destination IP Unroutable



   Name:  destination_ip_unroutable

   Description:  The intermediary cannot find a route to the next-hop IP
      address.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.7.  Connection Refused



   Name:  connection_refused

   Description:  The intermediary's connection to the next hop was
      refused.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.8.  Connection Terminated



   Name:  connection_terminated

   Description:  The intermediary's connection to the next hop was
      closed before a complete response was received.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.9.  Connection Timeout



   Name:  connection_timeout

   Description:  The intermediary's attempt to open a connection to the
      next hop timed out.

   Extra Parameters:  None

   Recommended HTTP Status Code:  504

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.10.  Connection Read Timeout



   Name:  connection_read_timeout

   Description:  The intermediary was expecting data on a connection
      (e.g., part of a response) but did not receive any new data in a
      configured time limit.

   Extra Parameters:  None

   Recommended HTTP Status Code:  504

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.11.  Connection Write Timeout



   Name:  connection_write_timeout

   Description:  The intermediary was attempting to write data to a
      connection but was not able to (e.g., because its buffers were
      full).

   Extra Parameters:  None

   Recommended HTTP Status Code:  504

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.12.  Connection Limit Reached



   Name:  connection_limit_reached

   Description:  The intermediary is configured to limit the number of
      connections it has to the next hop, and that limit has been
      exceeded.

   Extra Parameters:  None

   Recommended HTTP Status Code:  503

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.13.  TLS Protocol Error



   Name:  tls_protocol_error

   Description:  The intermediary encountered a TLS error when
      communicating with the next hop, either during the handshake or
      afterwards.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

   Notes:  Not appropriate when a TLS alert is received; see
      tls_alert_received.

2.3.14.  TLS Certificate Error



   Name:  tls_certificate_error

   Description:  The intermediary encountered an error when verifying
      the certificate presented by the next hop.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.15.  TLS Alert Received



   Name:  tls_alert_received

   Description:  The intermediary received a TLS alert from the next
      hop.

   Extra Parameters:

      alert-id:  An Integer containing the applicable value from the
         "TLS Alerts" registry.  See [TLS].

      alert-message:  A Token or String containing the applicable
         description string from the "TLS Alerts" registry.  See [TLS].

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.16.  HTTP Request Error



   Name:  http_request_error

   Description:  The intermediary is generating a client (4xx) response
      on the origin's behalf.  Applicable status codes include (but are
      not limited to) 400, 403, 405, 406, 408, 411, 413, 414, 415, 416,
      417, and 429.

   Extra Parameters:

      status-code:  An Integer containing the generated status code.

      status-phrase:  A String containing the generated status phrase.

   Recommended HTTP Status Code:  The applicable 4xx status code

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

   Notes:  This type helps distinguish between responses generated by
      intermediaries from those generated by the origin.

2.3.17.  HTTP Request Denied



   Name:  http_request_denied

   Description:  The intermediary rejected the HTTP request based on its
      configuration and/or policy settings.  The request wasn't
      forwarded to the next hop.

   Extra Parameters:  None

   Recommended HTTP Status Code:  403

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.18.  HTTP Incomplete Response



   Name:  http_response_incomplete

   Description:  The intermediary received an incomplete response to the
      request from the next hop.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.19.  HTTP Response Header Section Too Large



   Name:  http_response_header_section_size

   Description:  The intermediary received a response to the request
      whose header section was considered too large.

   Extra Parameters:

      header-section-size:  An Integer indicating how large the received
         headers were.  Note that they might not be complete; i.e., the
         intermediary may have discarded or refused additional data.

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.20.  HTTP Response Header Field Line Too Large



   Name:  http_response_header_size

   Description:  The intermediary received a response to the request
      containing an individual header field line that was considered too
      large.

   Extra Parameters:

      header-name:  A String indicating the name of the header field
         that triggered the error.

      header-size:  An Integer indicating the size of the header field
         that triggered the error.

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.21.  HTTP Response Body Too Large



   Name:  http_response_body_size

   Description:  The intermediary received a response to the request
      whose body was considered too large.

   Extra Parameters:

      body-size:  An Integer indicating how large the received body was.
         Note that it may not have been complete; i.e., the intermediary
         may have discarded or refused additional data.

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.22.  HTTP Response Trailer Section Too Large



   Name:  http_response_trailer_section_size

   Description:  The intermediary received a response to the request
      whose trailer section was considered too large.

   Extra Parameters:

      trailer-section-size:  An Integer indicating how large the
         received trailers were.  Note that they might not be complete;
         i.e., the intermediary may have discarded or refused additional
         data.

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.23.  HTTP Response Trailer Field Line Too Large



   Name:  http_response_trailer_size

   Description:  The intermediary received a response to the request
      containing an individual trailer field line that was considered
      too large.

   Extra Parameters:

      trailer-name:  A String indicating the name of the trailer field
         that triggered the error.

      trailer-size:  An Integer indicating the size of the trailer field
         that triggered the error.

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.24.  HTTP Response Transfer-Coding Error



   Name:  http_response_transfer_coding

   Description:  The intermediary encountered an error decoding the
      transfer coding of the response.

   Extra Parameters:

      coding:  A Token containing the specific coding (from the "HTTP
         Transfer Coding Registry") that caused the error.

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.25.  HTTP Response Content-Coding Error



   Name:  http_response_content_coding

   Description:  The intermediary encountered an error decoding the
      content coding of the response.

   Extra Parameters:

      coding:  A Token containing the specific coding (from the "HTTP
         Content Coding Registry") that caused the error.

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.26.  HTTP Response Timeout



   Name:  http_response_timeout

   Description:  The intermediary reached a configured time limit
      waiting for the complete response.

   Extra Parameters:  None

   Recommended HTTP Status Code:  504

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.27.  HTTP Upgrade Failed



   Name:  http_upgrade_failed

   Description:  The process of negotiating an upgrade of the HTTP
      version between the intermediary and the next hop failed.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.28.  HTTP Protocol Error



   Name:  http_protocol_error

   Description:  The intermediary encountered an HTTP protocol error
      when communicating with the next hop.  This error should only be
      used when a more specific one is not defined.

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  false

   Reference:  RFC 9209

2.3.29.  Proxy Internal Response



   Name:  proxy_internal_response

   Description:  The intermediary generated the response itself without
      attempting to connect to the next hop.

   Extra Parameters:  None

   Recommended HTTP Status Code:  The most appropriate status code for
      the response

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.30.  Proxy Internal Error



   Name:  proxy_internal_error

   Description:  The intermediary encountered an internal error
      unrelated to the origin.

   Extra Parameters:  None

   Recommended HTTP Status Code:  500

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.31.  Proxy Configuration Error



   Name:  proxy_configuration_error

   Description:  The intermediary encountered an error regarding its
      configuration.

   Extra Parameters:  None

   Recommended HTTP Status Code:  500

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.3.32.  Proxy Loop Detected



   Name:  proxy_loop_detected

   Description:  The intermediary tried to forward the request to
      itself, or a loop has been detected using different means (e.g.,
      [RFC8586]).

   Extra Parameters:  None

   Recommended HTTP Status Code:  502

   Response Only Generated by Intermediaries:  true

   Reference:  RFC 9209

2.4.  Defining New Proxy Error Types



   New proxy error types can be defined by registering them in the "HTTP
   Proxy Error Types" registry.

   Registration requests are reviewed and approved by Expert Review, per
   [RFC8126], Section 4.5.  A specification document is appreciated but
   not required.

   The expert(s) should consider the following factors when evaluating
   requests:

   *  Community feedback

   *  If the value is sufficiently well-defined

   *  Generic types are preferred over vendor-specific, application-
      specific, or deployment-specific values.  If a generic value
      cannot be agreed upon in the community, the type's name should be
      correspondingly specific (e.g., with a prefix that identifies the
      vendor, application, or deployment).

   *  Extra parameters should not conflict with registered Proxy-Status
      parameters.

   Registration requests should use the following template:

   Name:  [a name for the proxy error type that is of type Token]

   Description:  [a description of the conditions that generate the
      proxy error type]

   Extra Parameters:  [zero or more optional parameters, along with
      their allowable Structured Type(s)]

   Recommended HTTP Status Code:  [the appropriate HTTP status code for
      this entry]

   Response Only Generated by Intermediaries:  ['true' or 'false']

   Reference:  [to a specification defining this error type; optional]

   Notes:  [optional]

   If the proxy error type might occur in responses that are not
   generated by the intermediary -- for example, when an error is
   detected as the response is streamed from a forward connection,
   causing a Proxy-Status trailer field to be appended -- the 'Response
   only generated by intermediaries' should be 'false'.  If the proxy
   error type only occurs in responses that are generated by the
   intermediary, it should be 'true'.

   See the registry at <https://www.iana.org/assignments/http-proxy-
   status> for details on where to send registration requests.

3.  IANA Considerations

   IANA has created the "HTTP Proxy-Status Parameters" registry and the
   "HTTP Proxy Error Types" registry at
   <https://www.iana.org/assignments/http-proxy-status> and has
   populated them with the types defined in Sections 2.1 and 2.3
   respectively; see Sections 2.2 and 2.4 for their associated
   procedures.

   Additionally, the following entry has been added to the "Hypertext
   Transfer Protocol (HTTP) Field Name Registry":

   Field name:  Proxy-Status
   Status:  permanent
   Specification document(s):  RFC 9209
   Comments:

4.  Security Considerations



   One of the primary security concerns when using Proxy-Status is
   leaking information that might aid an attacker.  For example,
   information about the intermediary's configuration and backend
   topology can be exposed, allowing attackers to directly target
   backend services that are not prepared for high traffic volume or
   malformed inputs.  Some information might only be suitable to reveal
   to authorized parties.

   As a result, care needs to be taken when deciding to generate a
   Proxy-Status field and what information to include in it.  Note that
   intermediaries are not required to generate a Proxy-Status field in
   any response and can conditionally generate them based upon request
   attributes (e.g., authentication tokens, IP address).

   Likewise, generation of all parameters is optional, as is the
   generation of the field itself.  Also, the field's content is not
   verified; an intermediary can claim certain actions (e.g., sending a
   request over an encrypted channel) but fail to actually do that.

5.  References



5.1.  Normative References



   [HTTP]     Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
              Ed., "HTTP Semantics", STD 97, RFC 9110,
              DOI 10.17487/RFC9110, June 2022,
              <https://www.rfc-editor.org/info/rfc9110>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC7301]  Friedl, S., Popov, A., Langley, A., and E. Stephan,
              "Transport Layer Security (TLS) Application-Layer Protocol
              Negotiation Extension", RFC 7301, DOI 10.17487/RFC7301,
              July 2014, <https://www.rfc-editor.org/info/rfc7301>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8499]  Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS
              Terminology", BCP 219, RFC 8499, DOI 10.17487/RFC8499,
              January 2019, <https://www.rfc-editor.org/info/rfc8499>.

   [RFC8914]  Kumari, W., Hunt, E., Arends, R., Hardaker, W., and D.
              Lawrence, "Extended DNS Errors", RFC 8914,
              DOI 10.17487/RFC8914, October 2020,
              <https://www.rfc-editor.org/info/rfc8914>.

   [STRUCTURED-FIELDS]
              Nottingham, M. and P-H. Kamp, "Structured Field Values for
              HTTP", RFC 8941, DOI 10.17487/RFC8941, March 2021,
              <https://www.rfc-editor.org/info/rfc8941>.

   [TLS]      Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

5.2.  Informative References



   [RFC8586]  Ludin, S., Nottingham, M., and N. Sullivan, "Loop
              Detection in Content Delivery Networks (CDNs)", RFC 8586,
              DOI 10.17487/RFC8586, April 2019,
              <https://www.rfc-editor.org/info/rfc8586>.

Authors' Addresses



   Mark Nottingham
   Fastly
   Prahran
   Australia
   Email: mnot@mnot.net
   URI:   https://www.mnot.net/


   Piotr Sikora
   Google
   Email: piotrsikora@google.com